1142 review articles in this category branch, ordered by product demand and buyer signal strength.
The ELECROW ThinkNode M1 is a compact Meshtastic LoRa transceiver with a built-in GPS (GPS, GLONASS, BeiDou, QZSS) and a sun-readable 1.54-inch E-ink display. Buyers highlight easy Bluetooth setup, strong day visibility, and battery life around 48 hours, with a few caveats around firmware quirks and antenna connection when upgrading.
The CreaDream Tablet Pillow Stand is a foldable, adjustable tablet holder that lets you use your device on your lap or on a bed, couch, or desk. It uses Velcro to change viewing angles and includes a plush storage pocket plus a side stylus mount, but it is best for comfortable, non-rigid setups rather than strict desk-work stability.
The KiwiBird USB C splitter expands one USB-C port into two, helping you run low-power USB-C accessories or share a single charger among devices. It supports USB 2.0 data transfer and basic charging, but it is not designed for simultaneous “fast charging + data,” and it does not support video output.
The Kensington K64613WW is a compact desk- or work-surface anchor for Kensington-compatible cable locks. It gives you a convenient, tamper-resistant point to route and secure a lock, with installation options using included mounting tape or security screws.
A 14-inch, 16:9 laptop privacy filter designed to reduce side-angle viewing, cut glare, and add blue-light and scratch protection. It can be a strong fit for travelers and anyone working in public, but double-check dimensions, because fit issues are the most common downside in buyer feedback.
The GoTEK SFR1M44-U100 replaces a 3.5-inch 1.44MB floppy drive with a USB-flash-drive-based emulator, designed for 34-pin floppy interfaces and 5V power. Buyers like the real-world “works once installed” payoff for older instruments and industrial equipment, with the main caveat being firmware and USB-format requirements (plus some workflow friction when switching disks).
The Xiiaozet LK300W wireless print server turns up to three USB printers into shared network printers, for easier printing from multiple computers without dedicating a host PC. It supports standard TCP/IP RAW and IPP workflows, with both Wi-Fi and wired LAN options. The main caveat is compatibility: it will not help if your printer relies on proprietary protocols (and some models may need sleep mode and bidirectional settings adjusted).
The SKE VL625 is a compact 625VA (360W) UPS designed for home offices and networking gear, with built-in AVR voltage regulation, simulated sine wave output, RJ45 surge protection, and 7 outlets (5 battery backup + 2 surge-only). It also includes USB-A and USB-C charging ports for devices you want powered during short outages. The main tradeoff is limited runtime for heavier loads, plus some buyers report issues with the USB-C charging port and slower-than-expected Ethernet link speed during pass-through.
The Yamaya 15.6-inch laptop privacy screen is a removable privacy filter designed to limit side viewing (over 30°) while keeping the display clear from straight ahead. It also offers anti-glare (matte side) and blue light/UV reduction claims, with two installation options for different user preferences.
A slim, sticker-on sliding webcam cover set designed to let you quickly open or close your camera for privacy, with a cute look and nano-gel adhesive for staying power. Best for people who want a low-profile cover for phones, tablets, PCs, and similar devices, but it may not fit every webcam cutout or camera shape.
The I3C laptop cable lock is a keyed security cable designed to deter theft for laptops and other electronics, with two setup paths: use a standard lock slot when available, or attach an anchor plate with adhesive when it is not. It is a practical, budget-friendly option for classrooms, offices, and shared spaces, but the fit and durability depend heavily on whether your device has the compatible slot or a suitable surface for the adhesive plate.
The UnionSine FD450 is a mini USB-C “SSD-stick” designed to add fast, portable storage for phones, tablets, laptops, and compatible TVs or car audio. Buyers like its pocket-friendly size, quick photo and video offloads, and plug-and-play setup, with a practical caveat that it is only a USB-C stick and may protrude on some laptops.
This ultra-thin webcam cover slider uses a strong adhesive to block your laptop or tablet’s camera when you do not need it. It’s designed to be barely noticeable and thin enough to avoid interfering with most laptop closing, with a key tradeoff being that the slider covers can feel flimsy and require careful handling during installation.
![QianLink USB Type C to HDMI Adapter, USB C to HDMI 4K Cable [Thunderbolt 3/4]](/product-images/019ef038-00fd-7287-af76-9d95ec3a4d94-0-450640866da8.webp)
The QianLink USB-C to HDMI adapter is a plug-and-play cable-style solution for getting video (and audio) from compatible USB-C or Thunderbolt-equipped devices to an HDMI monitor or TV. It’s best for buyers who want simple setup and support for up to 4K@30Hz (2K@60Hz), with the main caveat being that your device must support USB-C DP Alt mode.
A digitizer glass replacement kit for the iPad 6th Gen (2018) 9.7-inch models A1893/A1954, with pre-installed adhesive, a spare home button (ordinary button functions only), and a repair tool kit. Buyers report the screen can be installed using online video guidance, but success depends heavily on following the adhesive layout and careful handling.
The MELIPRON truck laptop mount is a no-drill, vehicle-specific seat-rail installation designed for Silverado, Tahoe, Sierra, and Yukon models. It offers adjustable height, tilt, and 360° rotation plus dual USB-powered cooling fans, with a heavy-duty aluminum and steel build meant for daily, on-the-go work. Biggest caveat: it is only a good fit for the listed GM model years and seat-rail bolt setup, and some setup care is needed to avoid over-tightening clamps.
A 3.5-inch 4TB SATA 6.0Gb/s internal drive built for always-on use cases like desktops, NAS, and CCTV DVR systems, with a 7200RPM spindle and 64MB cache. It’s a bare drive only, so plan for your own mounting hardware, plus formatting in your system before it shows up.
A 2-pack of 20W USB-C PD chargers with two USB-C to USB-C cables (6 ft and 10 ft) for iPad and many iPhone models. It’s positioned for faster top-up charging and convenient cable length at home, office, or travel, with the main caveat that real-world speed depends on your iPad model and power profile.
The FORIDA 3-port USB hub is a compact way to add USB-A connections for low-power accessories like keyboards, mice, and small peripherals, with one USB 3.0 port capable of up to 5Gbps for faster data devices. It is a simple plug-and-play adapter, but it is not designed for charging phones or for CarPlay use.
The StarTech.com ST4300MINU3B is a slim, USB-powered 4-port USB 3.0 travel hub that turns one laptop USB port into four. With SuperSpeed USB 3.0 up to 5Gbps and backward compatibility for older USB devices, it suits busy home or business setups, especially when you need extra ports without a bulky dock.
The TP-Link Roam 6 AX1500 is a compact Wi‑Fi 6 travel router built for creating a private network from hotel or RV Wi‑Fi, with multi-mode support, dual Gigabit Ethernet ports, and a USB‑C power setup. It is especially useful for VPN-focused remote work and for travelers who want quick setup through the Tether app, with the main caveat that some advanced networking features may be limited versus higher-tier models.
The Inateck KB02027 is a Bluetooth keyboard built specifically for Surface Pro 7/7+/6/5/4, with a larger touchpad, anti-mistouch behavior, and a 7-color backlight for typing in dim rooms. Its magnetic attachment lets you use it snapped on or detached, but it requires separate charging (and at least one buyer reported a connectivity or reliability problem).
The UGREEN 5-port 2.5Gb unmanaged switch is a straightforward way to expand multi-gig Ethernet for a NAS, PCs, or gaming gear. Setup is plug-and-play, it runs fanless, and it’s designed for quiet, desk-friendly placement, with the main caveat being limited port count and a mostly “set it and forget it” feature set (no PoE, unmanaged behavior).
The Jakeko Portable Monitor Stand Large Clamp is a heavy-duty, foldable aluminum desk clamp stand designed for portable monitors, tablets, and many iPad and Galaxy models. It prioritizes stability (up to 4.4 lb support) and 360-degree rotation for quick portrait or landscape viewing, with a built-in tension adjustment tool. Main caveat: iPad compatibility may require using a magnetic/copper disk approach rather than simple direct mounting with some cases.
The TRENDnet TPE-119GI is a wall-mount Gigabit PoE++ (802.3bt) injector that lets you power high-wattage PoE devices over Ethernet from a non-PoE switch. It supports auto-sensing for the right wattage up to 95W, with a claimed 100m reach and a metal enclosure for flexible installs. Best for adding PoE++ capability to existing networks, not for powering low-wattage PoE devices only.
The Eanetf 5-in-1 adapter combines a USB 3.0 to HDMI output with a compact 5-port hub (dual USB-C plus USB-A) for adding one extra HDMI display and expanding ports from a single connection. Best for static screen tasks like office work or monitoring, but it can require driver installation and is not positioned for gaming or high-motion video.
The Ubiquiti UniFi Swiss Army Knife Ultra Access Point (UK-Ultra-US) is a compact, weatherproof Wi-Fi 5 access point with 4 spatial streams, PoE power, and GbE uplink. It is a solid fit for buyers who want a versatile, indoor-outdoor option and are already in the UniFi ecosystem, with the main caveat that you will need PoE hardware if your network gear does not provide it.
The Monoprice 6P6C 1-Port Surface Mount (107084) is a compact USB 2.0 print server that lets multiple computers send jobs to a single USB printer over Ethernet. It is a solid fit for simple network printing, but compatibility depends on printer support and may require manual configuration (including LPR) for unsupported models.
This 2-pack converts 1000BASE-LX single-mode LC fiber (1310nm) to Gigabit copper Ethernet (RJ-45). It’s plug-and-play with hot-swappable SFP modules, and it supports single-mode links up to 20 km (SMF). The main catch is it’s built for single-mode 1310nm/LX fiber, so buyers with different fiber types or wavelengths will need a different converter.
The U7-Outdoor is a dual-band, Wi‑Fi 7 outdoor access point built for harsh locations (IPX6) and aimed at larger spaces. It supports WPA3 security, uses a 2.5 GbE PoE+ port, and is designed for up to 250+ clients, but it requires a compatible PoE+ switch or 48V PoE injector (sold separately).
The EAGET 512GB SU52 is a compact, dual-connector flash drive built for quick storage expansion across USB-C and USB-A devices. It targets fast transfers (up to 560MB/s) and on-the-go durability with a metal body and a leather case, with the main practical caveat being that you may need to pay attention to fit (especially with phone cases) and safe ejection habits when pulling it out.
A 10-pack of 10GbE SFP+ (LC, multi-mode) transceivers designed for short-reach fiber links up to 400m at 850nm. It’s built for broad compatibility with many SFP+ ports and supports hot-plug use plus DDM for link monitoring, but buyers should confirm their fiber type and switch/NIC requirements before ordering.
This compact 3.5-inch external floppy disk reader connects via USB (A and Type-C) and is designed for Windows PCs to access and transfer data from old floppy disks. It’s generally praised for easy setup and recognizing many disks, but floppy media age and software compatibility can limit what you can open.
ECHOGEAR’s 25-pack of 10/32 rack screws is designed for standard networking racks, cabinets, and enclosures. With steel construction, black zinc coating, pre-attached nylon washers, and pilot-point heads, they’re aimed at reducing stripping and speeding up installation. Best fit for buyers who want the right thread size and a tidy, professional-looking hardware setup.
This 30-piece M.2 NVMe mounting kit is designed to help you complete SSD installs and common laptop or desktop repairs without hunting down missing screws. It includes multiple M.2 standoff heights plus insulating gaskets, and it comes with a non-magnetic Phillips PH0 screwdriver for more careful motherboard work.
The STREBITO 11-piece spudger and opening pick kit is a compact repair-tool set for prying open electronics cases and screen assemblies. Buyers like the variety, plastic spudger gentleness, and the feel of the metal tools, with the main caveat that a few included picks may have rough edges and at least one metal piece may arrive slightly off (worth inspecting before use).
The AYWHP Nano V3.0 is a breadboard-friendly Arduino Nano-style development board built around an ATmega328P MCU and a CH340 USB-to-serial interface, with USB-C power and programming. It is a good choice for Arduino-compatible projects and beginners who want a familiar workflow, with the main caveat that it is not the official FT232-based Nano and the USB-serial behavior can matter for higher baud-rate code.
A compact DC mini UPS designed to keep Wi‑Fi routers and small networking gear running during outages. It supports multiple input/output options (including common DC barrel sizes and USB-C/USB-A) and shows real-time status on an LCD, with a key limitation being a total output cap of 24W.
The Iomega ZIP 750 is an external USB Zip drive designed for compact, portable backup and file transfer using Zip disks (750 MB capacity). It’s a niche option best for people trying to access existing Zip archives or maintaining legacy workflows, with mixed buyer sentiment mainly focused on “it works” rather than modern USB convenience.
A compact 7-port USB 3.0 hub designed to expand a laptop or desktop with multiple USB peripherals at once. It supports up to 5Gbps data transfer and includes individual port on/off switches, but it is strictly data-only (no charging).
The SunFounder PCA9685 16-channel 12-bit PWM servo driver adds 16 I2C-controlled PWM outputs, so you can run more servos or PWM-driven electronics without tying up your microcontroller. It’s designed to be “free running” once configured, with 5V logic compatibility, but you still need to plan power properly, especially for larger servo loads.
A budget-friendly 10-inch Android 15 tablet built for everyday streaming, web browsing, and light productivity. It combines a bright 1280×800 IPS display, Wi‑Fi 6 and Bluetooth 5.4, and a 5000mAh battery rated up to around 5 hours of mixed use, with expandable storage up to 1TB via a TF card (not included). The main caveat is that it is best suited for regular tasks, not heavy gaming or high-end performance demands.
The X-MEDIA XM-PS110P turns a legacy parallel (Centronics) printer into a network printer with one Ethernet port. Buyers generally report straightforward setup and reliable printing for older hardware, with the main caveat being that some workflows may require extra TCP/IP or driver configuration, and Mac printing can take additional steps.
The CyberPower CP500PFCRM1U is a 1U rackmount UPS with PFC-compatible sine wave output, surge protection, and AVR to smooth minor voltage dips. It offers 6 outlets (4 battery backup, 2 surge-only) plus a multifunction LCD for runtime and alerting, with support for optional remote monitoring.
A matte 13.6-inch privacy screen filter for MacBook Air (2022-2026, M2-M5) designed to keep the display readable from straight ahead while dimming it from off-angles. It also targets glare and blue light, and buyers highlight easy installation and a bubble-free look, with a key caveat that it will not block views directly behind you.
This 20W USB-C wall charger is designed for select Samsung Galaxy Tab models and other USB-C devices that support USB Power Delivery. It’s compact, includes built-in safeguards for overheat and overcharge protection, and reviews commonly describe it as working right out of the box for fast charging. The main catch is that you only get the power adapter, not a charging cable.
The KEANBOLL 2-pack tempered glass protector is designed specifically for certain 15.3-inch MacBook Air models (M5–M2 era). It’s built around 9H hardness, an anti-fingerprint/oleophobic coating, and glossy, clear viewing. The biggest purchase caveat is fit, plus installation may leave bubbles if alignment or technique is off.
The ZZB 10-inch Android 15 kids tablet is aimed at families who want a larger screen, kid-friendly learning apps, expandable storage, and a protective EVA case. It’s frequently described as easy for children to use, responsive for everyday apps, and strong on battery life, though charging speed may be slower than some parents expect.