Desktop Barebones
Electronics / Computers & Accessories / Computer Components / Desktop Barebones
Electronics / Computers & Accessories / Computer Components
59 review articles in this category branch, ordered by product demand and buyer signal strength.
Subcategories
Internal Components
Electronics / Computers & Accessories / Computer Components / Internal Components
Single Board Computers
Electronics / Computers & Accessories / Computer Components / Single Board Computers
Computer Screws
Electronics / Computers & Accessories / Computer Components / Computer Screws
Laptop Replacement Parts
Electronics / Computers & Accessories / Computer Components / Laptop Replacement Parts
External Components
Electronics / Computers & Accessories / Computer Components / External Components
Articles
Seagate IronWolf Pro 24TB Enterprise NAS Internal HDD Hard Drive (ST24000NT002)
The Seagate IronWolf Pro 24TB (ST24000NT002) is a 3.5-inch, 7200 RPM, SATA 6Gb/s NAS hard drive built for multi-bay RAID storage. It targets 24×7 reliability with CMR recording, workload support up to 550TB/year, and IronWolf Health Management, plus complimentary Rescue Data Recovery services.
Western Digital 4TB WD Black Gaming Internal Hard Drive HDD - 7200 RPM, SATA 6 Gb/s, 256 MB Cache, 3.5" - WD4006FZBX
The WD Black 4TB (WD4006FZBX) is a 3.5-inch SATA internal HDD designed for desktop gaming PCs and system builders who want large-capacity storage with solid mechanical drive performance. It leans into reliability features like StableTrac and Dynamic Cache, but it is also a spinning drive, so noise can be a deal-breaker for ultra-quiet setups.
Western Digital 4TB WD Blue SN5000 NVMe Internal Solid State review
The WD Blue SN5000 NVMe (4TB, M.2 2280) targets mainstream performance needs with PCIe Gen 4 speeds up to about 5,500 MB/s read. Buyers report strong real-world speed, good sustained write behavior, and solid year-over-year reliability for gaming and general system upgrades, with the main caveat being that it is not chasing PCIe Gen 5 or the absolute top-tier NVMe speeds.
Crucial P310 1TB M.2 2230 SSD, PCIe Gen4 NVMe
Crucial P310 is a compact M.2 2230 PCIe Gen4 NVMe SSD built for handheld gaming PCs and other tight-space upgrades (Steam Deck, ROG Ally, select Surface and Dell systems). Reviewers highlight strong perceived speed, smoother responsiveness after cloning, and power-friendly behavior, with one key caution: it can run warm in some setups and small adapters.
UGREEN USB 3.0 Switch 2 Computers Sharing USB C & A Devices (4-Port USB Switcher with Controller)
UGREEN’s USB 3.0 switch lets two computers share the same set of USB peripherals through a single, compact 4-port hub. It supports data switching up to 5Gbps (USB 3.0), works with Windows/macOS/Chrome OS/Linux, and offers both remote controller and button switching. The main caveat is that it’s a data-only USB switch (no monitor/video sharing) and some devices may need the included USB-C power approach to stay stable.
WD Blue SN5100 1TB NVMe SSD
The WD Blue SN5100 1TB NVMe SSD is an M.2 2280 PCIe Gen 4.0 drive built for faster boot and quicker file transfers, with read speeds rated up to 7,100MB/s. It’s a straightforward option for PC or laptop storage upgrades, with migration software included and a 5-year limited warranty. Buyer-fit caveat: you’ll need the right M.2 2280 slot and appropriate mounting hardware (some systems may require extra screws/spacers).
Gigastone 128GB Game Turbo SSD (10-Pack) Up to 500MB/s with SLC Caching
Gigastone’s 2.5-inch SATA SSD lineup (sold as a 10-pack of 128GB drives) targets budget-friendly upgrades for PCs, laptops, and PS4, with claimed read speeds up to 500MB/s via SLC caching. It’s a practical option for entry-level performance and for buyers who want multiple spare drives, but 128GB is tight for modern OS and game libraries.
SIX NVME M.2 SSD PCIe 4.0-1TB m.2 2280 ssd, Read
The SIX X7400 1TB NVMe SSD is a PCIe Gen4x4 M.2 2280 drive designed for faster gaming loads and quicker transfers, and it includes a heatsink and installation extras. It can deliver top speeds on PCIe Gen4-capable systems, but buyers with PCIe Gen3-only slots should expect reduced performance.
Seagate Barracuda 24TB Internal Hard Drive, 7200 U/Min, 512MB Cache, SATA 6Gb/s, 3.5" (ST24000DM001)
Seagate’s BarraCuda 24TB SATA HDD (3.5-inch, 7200 RPM, 512MB cache) is a strong pick for bulk storage, media libraries, backups, and game/media drives where cost per terabyte matters. It is not meant to replace an SSD as a system boot drive, and buyer experience can depend on the SATA controller setup (especially with very large capacities).
CanaKit Raspberry Pi 5 16GB Starter Kit PRO - Turbine Black (128GB Edition) (16GB RAM)
The CanaKit Raspberry Pi 5 16GB Starter Kit PRO (Turbine Black, 128GB edition) is an all-in-one bundle aimed at getting you running fast, with 16GB RAM, a pre-loaded 128GB microSD card, a case with active cooling, a heat sink, a PWM fan, and a 45W USB-C PD power supply. It is a strong pick for learning, coding, and everyday Pi projects, especially if you want less part-hunting than a bare board. The main caveat is that it is still a single-board computer, so some desktop-style workflows may require extra peripherals and setup.
RasTech Raspberry Pi 5 Kit 8GB RAM with Pi 5 Case,Active Cooler,Screwdrive and Pi 5 8GB Board Included
The RasTech Raspberry Pi 5 Kit bundles the Raspberry Pi 5 (8GB) with a case and active cooler, targeting makers and beginners who want a ready-to-assemble starting point. It supports dual 4Kp60 micro-HDMI displays, gigabit Ethernet, dual-band Wi‑Fi, Bluetooth 5.0, faster SD card mode (SDR104), and a PCIe interface for fast peripherals (with separate add-ons). The main catch is that it is a kit that still requires you to supply common items like a microSD card and peripherals, and assembly can take some careful alignment.
Seagate Exos 32TB Enterprise Internal Hard Drive HDD - 3.5in 6GB/s SATA 7200RPM 2.5M MTBF (ST32000NM004K)
The Seagate Exos ST32000NM004K is a 3.5-inch 32TB enterprise SATA HDD built for data-center style workloads, prioritizing high capacity, power efficiency, and long-run dependability. It suits bulk storage and always-on NAS or server use, but it is not a fast, modern alternative to SSDs, and some buyers report potential DOA or reliability issues.
Bolt Dropper 502pcs Computer Screw Assortment Kit
The Bolt Dropper 502pcs Computer Screw Assortment Kit is a labeled, multi-thread screw and standoff set built for PC building and repairs. It’s a strong fit for people who want to avoid being stuck mid-upgrade, but it is not a guarantee for every niche device (some specialized systems may not match the included sizes).
iRasptek Starter Kit for Raspberry Pi 5 16GB RAM - Pre-Loaded with 128GB Edition Pi OS (Aluminum Case)
The iRasptek Raspberry Pi 5 16GB starter kit is built for fast, low-friction setup, with an aluminum case, an active PWM fan, a 27W USB-C power supply, and a pre-installed Pi OS setup. It’s a strong pick for light desktop use, learning, media playback, and project tinkering, but buyers who want NVMe via a larger M.2 HAT+ style setup may find the included case limits.
Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30
The Raspberry Pi NoIR Camera Module V2 pairs an 8MP Sony IMX219 sensor with a fixed-focus lens for sharp infrared-ready imaging. It supports common Pi camera video modes (including 1080p30) and is widely used for low-light and night projects like monitoring, security-style setups, and webcam uses.
SunFounder ESP32 Ultimate Starter Kit (Compatible with Arduino) ESP32CAM, RoHS
A battery-friendly ESP32 learning kit that pairs an ESP32 board with a camera extension and a library of guided projects. It’s built to help beginners progress through electronics and IoT basics, with multiple programming options (Arduino C++, MicroPython, and Scratch) and a support-driven learning path.
AITRIP 1PCS Type-C ESP32 ESP-WROOM-32 Development Board WiFi + Bluetooth CP2102 Dual Core 2.4Ghz Microcontroller
The AITRIP Type-C ESP32 development board is a compact, maker-friendly ESP-WROOM-32 (dual-core) platform with built-in Wi-Fi and Bluetooth, USB Type-C (with CP2102) programming, and a lot of I/O options for sensors and interfaces. It is a strong fit for Wi-Fi/BLE projects and quick prototyping, with the main tradeoff being that you will need to learn C++ (or rely on an ecosystem toolchain) to fully leverage it.
Western Digital 500GB WD Green SN3000 NVMe Internal SSD (WDS500G4G0E)
The Western Digital WD Green SN3000 is a Gen4 NVMe M.2 2280 SSD built for faster app launches and smoother everyday multitasking, with read speeds up to 5,000 MB/s and a single-sided slim design for thin laptops. It appears to deliver “works as expected” performance for users, with limited but positive mentions of heat and compatibility, making it a solid upgrade for compatible M.2 slots.
![Arduino® UNO™ Q 2GB[ABX00162] Hybrid Board (Qualcomm Dragonwing + STM32)](/product-images/019eeb36-3cb4-7422-869e-58cae401abc0-0-37add828ea37.webp)
Arduino® UNO™ Q 2GB[ABX00162] Hybrid Board (Qualcomm Dragonwing + STM32)
The Arduino UNO Q 2GB (ABX00162) is a hybrid single-board computer built in the classic UNO form factor, combining a Qualcomm Dragonwing MPU with a low-power STM32 MCU. It’s designed for buyers who want Linux Debian, Python-friendly development, and Arduino-style expansion (UNO shields, Qwiic, Modulino) for lightweight AI vision, voice, and IoT/robotics prototypes. The main caveat: setup and accessory compatibility can be finicky because power negotiation and some companion tooling may be under active development.
ASUS NUC 14 Pro Tall Barebone with Intel 14thGen Core Ultra 7 155H
The ASUS NUC 14 Pro Tall is a compact desktop barebone built around the Intel Core Ultra 7 155H, aiming at quiet, efficient everyday performance (and light server use) with Thunderbolt 4 and Wi‑Fi 6E. It’s a strong fit if you want to add your own RAM and storage, but buyer experience hinges on setup know-how and the limited onboard configuration options some users report.
LILYGO T-Deck Plus ESP32-S3 Single Board Computer 915Mhz LORA-89 GPS 2.8-inch Display External Antenna
The LILYGO T-Deck Plus is a compact ESP32-S3 development board designed for LoRa/mesh-style field messaging, with a built-in screen and keyboard for standalone configuration and use. Reviewers highlight strong real-world reliability and helpful on-device monitoring, but setup can require computer time, and the included antenna may be underwhelming for some buyers.
ASRock Barebone System Components Other DESKMINI 310W, Black, Intel 8th
ASRock’s DeskMini 310W is a compact Intel 8th-gen barebones system built around low-power performance, flexible storage (2.5-inch drives plus an Ultra M.2 slot), and triple display outputs (DP, HDMI, VGA). It’s a strong fit for a quiet home office or small workstation, but it is not designed for power-gpu builds, and Intel 8th-gen CPUs can be a sourcing challenge.
Freenove Raspberry Pi Pico 2 W Board Pre-Soldered Header, Dual
The Freenove Raspberry Pi Pico 2 W is a dual-core development board with built-in 2.4 GHz 802.11n Wi-Fi and Bluetooth 5.2, plus GPIO, PWM, ADC, and common serial interfaces for maker projects. Buyers like the overall value, strong wireless connectivity, and the flexibility to program with MicroPython, C, or other included example code, with the main caveat that you will need to download tutorials and supporting items for projects.
KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD
The KEYESTUDIO 48 Sensors Modules Starter Kit is a mixed set of Arduino-focused sensor and driver modules (plus components like an LCD, servo, and relay) designed to help beginners practice wiring and example code. It works best if you already have an Arduino-compatible board and you are comfortable using online tutorials for setup and programming.
14" Laptop Screen Extender, 1080P FHD Dual Portable Monitor for Laptop with Speaker, USB-C/HDMI Plug & Play, Extended Screen for Mac/Windows/Chrome, Fit 13-17.3" Laptops
The FEZOBR 14-inch 1080p portable screen extender is designed to add a second display on the go with plug-and-play USB-C (or HDMI plus USB-A) and extend or mirror modes. It’s a strong fit for remote work and travel, with a key caveat: compatibility can vary by laptop and connection setup.
m2 2280ssd Screws Kit,PCIe NVMe M.2 SSD Mounting Screws
This M.2 2280 (NGFF/PCIe NVMe) mounting screw kit is a budget-friendly way to replace missing screws or stock up before an SSD install. It includes 16 flat-head screws and a small screwdriver, with reports of a snug, no-wobble fit for common 2280 NVMe SSDs.
Sintron ST-002 Industrial Coin Operated Timer Control Power Box
The Sintron ST-002 is a coin-operated timer control power box designed for commercial, time-based equipment like washers, arcade machines, and massage chairs. It supports up to 110V/120V 16A and uses an 8-channel multi-coin acceptor with an LED countdown display, but buyers should plan for setup, programming, and potential reliability variability seen in limited reviews.
Wi-Fi Developer Board for Flipper Zero - All-in-One Complete Starter Kit with Full Protection (New Black)
This Flipper Zero Wi-Fi developer board starter kit bundles the Wi-Fi hardware plus protective case parts, so you can set up wireless features while keeping your device protected. Most buyers report it works as expected, but success depends on following the flashing procedure, and the Wi-Fi board is limited to 2.4 GHz (not 5 GHz).
MDD 2TB 64MB Cache 7200RPM SATA 6.0Gb/s 3.5inch Internal Surveillence Hard Drive (MDD2TSATA6472DVR)
A 3.5-inch, 2TB SATA 6.0Gb/s surveillance-style hard drive aimed at DVR/NVRs, desktops, and NAS builds that want a large capacity with a 7200RPM class spec and 64MB cache. The main caveat is buyer reports that it may not consistently match the advertised rotational speed, plus it is a bare drive that requires formatting to show up.
MDD MAXDIGITALDATA (MDD4000GSA6472) 4TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5inch Internal Desktop Hard Drive
A 3.5-inch 4TB SATA 6.0Gb/s internal drive built for always-on use cases like desktops, NAS, and CCTV DVR systems, with a 7200RPM spindle and 64MB cache. It’s a bare drive only, so plan for your own mounting hardware, plus formatting in your system before it shows up.
30PCS M.2 SSD Mounting Screws Kit, NVMe Screw Standoff Set
This 30-piece M.2 NVMe mounting kit is designed to help you complete SSD installs and common laptop or desktop repairs without hunting down missing screws. It includes multiple M.2 standoff heights plus insulating gaskets, and it comes with a non-magnetic Phillips PH0 screwdriver for more careful motherboard work.
Nano V3.0 Board with Cable, AYWHP 5PCS Nano Board ATmega328P, CH340G Chip 5V 16M, Microcontroller Compatible with Arduino Nano (USB C Port)
The AYWHP Nano V3.0 is a breadboard-friendly Arduino Nano-style development board built around an ATmega328P MCU and a CH340 USB-to-serial interface, with USB-C power and programming. It is a good choice for Arduino-compatible projects and beginners who want a familiar workflow, with the main caveat that it is not the official FT232-based Nano and the USB-serial behavior can matter for higher baud-rate code.
SunFounder PCA9685 16 Channel 12 bit PWM Servo Driver for Arduino and Raspberry Pi
The SunFounder PCA9685 16-channel 12-bit PWM servo driver adds 16 I2C-controlled PWM outputs, so you can run more servos or PWM-driven electronics without tying up your microcontroller. It’s designed to be “free running” once configured, with 5V logic compatibility, but you still need to plan power properly, especially for larger servo loads.
ProElife 7 Pcs Anti Dust Dirt Plug Cups Set
A budget-friendly silicone set of port plugs designed to help keep compatible MacBook Pro and MacBook Neo ports cleaner when they are not in use. Buyers report a snug fit for many ports and easy install, but a recurring caveat is that some plugs can feel loose or come out more easily depending on the port and model fit.
![Arduino Starter Kit R4 [K000007_R4] – Learn Electronics and Coding with the UNO R4 WiFi Board](/product-images/019eed68-6c5f-708b-9637-7858e8e198a3-0-48ad4ff19267.webp)
Arduino Starter Kit R4 [K000007_R4] – Learn Electronics and Coding with the UNO R4 WiFi Board
The Arduino Starter Kit R4 pairs the UNO R4 WiFi board with a printed book of 13 guided projects and online resources, aiming to get beginners building and coding quickly. It also includes an official certification voucher, which is a standout value for learners who want structured validation. Main catch: you will want to be comfortable learning step-by-step (and you may need to handle any arrival packaging issues yourself).
3 PCS ESP ESP-32-S3 Development Board ESP-32-S3 Module with ESP-1-N16R8 Low Power MCU with Dual-Mode Wi-Fi and Bluetooth Type-C Connector Compatible with Arduino
A 3-pack of ESP32-S3 dev boards built around the ESP-1-N16R8 module, aimed at Arduino and IoT projects that need Wi-Fi plus Bluetooth LE. The setup experience seems to go smoothly on mainstream IDEs, but buyers should pay attention to USB and port selection, and the review evidence is mixed on reliability and physical arrival.
ASTARON PC Screws M.2 Screw Kit, NVMe Screw m.2 SSD Mounting Kit for ASUS Motherboard
If your ASUS system didn’t include the tiny M.2 (NVMe/NGFF) mounting screws, ASTARON’s kit covers common needs with 10 M2 screws/standoffs plus a magnetic screwdriver to keep installation from turning into a scavenger hunt. The main limitation is compatibility: it’s made for ASUS M.2 screw requirements, not MSI or Gigabyte.
AT&T Prepaid Card $65 - AT&T Prepaid Refill Top-Up Card $65
The AT&T Prepaid Card $65 is a pay-as-you-go top-up card for compatible AT&T Prepaid mobile phones. It provides $65 value you can use toward talk time, texts, games, and other AT&T Prepaid services, but buyers should ensure the card’s redemption method and phone compatibility match their setup.
LeFix 12PCS M2x3 Torx T5 Screws + 1 Screwdriver Compatible
The LeFix 12PCS M2x3 Torx T5 screw kit is a small, practical replacement for specific Dell XPS and Precision laptop bottom-cover screws that use M2x3 Torx T5 hardware. It includes a Torx T5 screwdriver with a magnetic tip, which makes it easier to handle tiny screws, though buyers should double-check that their laptop uses the M2x3 “small head” style rather than larger-headed variants.
mankk 360PCS Laptop Screws 12 Sizes M2 M2.5 M3 Replacement Computer Tiny Screws
mankk’s 360-piece laptop and motherboard screw assortment covers common M.2 SSD and small chassis fasteners across 12 sizes (M2, M2.5, M3). It’s a solid “have on hand” kit for PC repair and DIY, with an included magnetic screwdriver, though the included driver can feel awkward in some cases and screw-set completeness depends on matching your standoff needs.
UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico (T-type breakout + breadboard)
The UCTRONICS GPIO Breakout Kit is a compact way to bring GPIO out to a solderless breadboard using a T-type expansion board plus a 40-pin rainbow ribbon cable and jumper wires. It is a convenient starter kit for learning and prototyping, with the main caveat being double-checking orientation since some boards can end up with reversed rails if you mount it the “wrong way” on the breadboard.
500 Pcs Small Replacement Screws, M1.2/M1.4/M2.0 Black Tiny Micro Laptop review
A bulk micro-screw assortment for small repairs, with carbon steel screws in multiple head styles and common metric sizes (M1.2, M1.4, M2.0). Best for buyers who regularly lose tiny fasteners on laptops, SSDs, glasses, watches, and other small electronics, but it is not a universal solution if your device uses uncommon screw standards or different head types.
waveshare USB to UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Systems Support, Support Linux (Only for Raspberry Pi)
The waveshare USB to UART/I2C/SPI/JTAG Converter is a compact debug adapter for firmware bring-up, EEPROM work, and hardware recovery tasks. It supports multi-protocol use cases (2-channel UART, or UART plus I2C plus SPI, or UART plus JTAG), includes 3.3V/5V level switching, and adds protection and status visibility. The main caveat is that Linux support is not “only Raspberry Pi” in practice, but JTAG reliability depends on your specific chip and tools, so plan to validate your setup.
DIN Rail Mount Bracket for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 4B 5 Zero UNO Mega-2560 BeagleBone Black
A simple aluminum DIN rail mounting plate for popular single-board computers like Raspberry Pi (multiple generations, including Pi Zero and Pi 5) and BeagleBone boards. Buyers report it snaps in securely and saves desk space, with one caveat that the DIN rail clamp can feel a bit less tight on some Pi 5 setups.
ELEGOO 3PCS 0.96 Inch OLED Display Screen Module Compact Self-Luminous SSD1306 I2C Display Mini Screens for Arduino Projects
These compact 0.96-inch OLED modules use the SSD1306 over I2C (3.3V to 5V) and are a solid fit for Arduino and Raspberry Pi projects that need clear, self-luminous 128x64 graphics. The main tradeoffs to know are the fixed (non-configurable) blue/yellow look, limited character size on the small screen, and potentially non-standard mounting hole spacing.
M.2 Screws, Motherboard Screw for Asus Gigabyte Asrock MSI Motherboards, Computer Screws for HDD, SSD, Fan, Power Supply, PC Case - PC Screws, M.2 Standoff and Screw
A 75-piece M.2 screw and standoff kit designed to help you mount NVMe/SSD drives and handle common PC screw needs across ASUS, MSI, Gigabyte, and ASRock builds. Buyers like the wide variety, secure fit, and “emergency stash” value, with the main caveat that there are many pieces to sort if you are new to PC building.
Replacement Keycaps Keys for MacBook Air M2 M3 M4 13'' 15'' A2681 A3113 A2941 A3114, MacBook Pro/Max 14 16'' M2 M3 M4 A2779 A2780 A2918 A2992 A2991 A3401 A3112 2022-2024 Black
A set of black replacement keycaps designed for specific 2022-2024 MacBook Air (M2/M3/M4) and MacBook Pro/Max (M2/M3/M4 Pro/Pro Max) models. It’s made for easier keycap swaps with included tools and improved backlight visibility, but hinge and “white hinge piece” compatibility matters, and getting the right top-row sizes for your exact model is critical.
46PCS NVME M.2 SSD Mounting Screws M.2 SSD Screw Kit for Asus Gigabyte ASRock Msi Motherboards
This 46-piece M.2 NVMe screw and standoff kit is built for common PC and laptop SSD mounting situations, including replacements when the tiny hardware is missing or mismatched. It includes a magnetic screwdriver and multiple standoff and screw sizes, making it a practical add-on for DIY builds and repairs.