(Pack of 3 3 AA Battery Holder with Leads, 3 AA Battery Holder with Wires)
Quick take
This is a set of three 3-AA battery holders with red and black leads, designed for projects that need a 4.5V battery pack (3x 1.5V AA). It is a practical choice for replacements and DIY electronics where you are comfortable soldering, but it has no on/off switch.
Pros and cons
Pros
- Includes three separate 3-AA holders with pre-attached leads for wiring into a circuit
- Rated for 3x AA operation (4.5V when using 1.5V AA cells)
- Red and black lead polarity makes connection straightforward for typical DC circuits
- Lightweight plastic (ABS) holders are easy to incorporate into compact builds
Cons
- No built-in cover or on/off switch, so you may need to add a control if you want easy power management
- Wiring involves soldering, which adds a step for non-hobbyist buyers
What buyers think
Buyer-review evidence is limited but consistent around a few themes. Many people purchase these holders as replacements for older holders that failed due to battery corrosion or damage, and they report the holders work as intended once installed. Several buyers also mention the leads are workable for soldering, and that the overall build is “cheap but fine” for practical replacement use.
What this battery holder is for
This pack is aimed at anyone powering a small device from 3 AA cells and who needs the battery terminals brought out to wire leads. With three holders included, it also makes sense when you need spares for multiple projects, or when one replacement is not enough.
Key specifications to know before buying
Battery configuration and output
- Type: 3x AA battery holder (3 AA cells in series)
- Voltage: 4.5V output when using standard 1.5V AA batteries
Leads and polarity
- Leads included: yes, each holder comes with red and black wires
- Lead ends: tinned wire ends for easier soldering
- Wire length: 5.9 in (15 cm)
- Polarity: red lead corresponds to the positive side, black to the negative side
Physical fit
- Housing material: ABS plastic
- Size of one holder: about 2.287 x 1.906 x 0.567 in (5.81 x 4.84 x 1.44 cm)
- Weight of one holder: about 11 g
Pros and cons for real-world use
Pros
- Replacement-friendly: Buyers use these to restore devices after battery-holder failure, especially when older holders were damaged or corroded.
- Wiring-ready: The pre-attached, tinned leads reduce how much terminal work you need to do before soldering into a circuit.
- Convenient polarity coloring: Red/black lead labeling aligns with common DC wiring practices.
Cons
- No switch or cover: If you need a power toggle or want the battery compartment protected, you will likely need to add a separate switch and mounting solution.
- Soldering required: It is a good fit for DIY and repair work, but it may be less suitable if you want a tool-free battery connection.
Who should buy (and who should skip)
Best for
- DIY electronics and small projects that require a 3-AA (4.5V) battery pack with wire leads
- Repair and replacement jobs where the original battery holder failed
- Buyers who are comfortable soldering the battery leads to a PCB or wiring harness
- People who want multiple holders in one pack for a couple of projects or quick swaps
Better alternatives if you need
- An on/off switch: Consider a holder that includes a switch if you do not want to add one externally.
- No soldering: Look for battery holders that use snap terminals or screw terminals instead of leads requiring solder.
- Extra battery protection: Choose a holder that includes a cover and more robust strain relief for leads.
Verdict
The pack of three 3-AA battery holders with leads is a straightforward, budget-oriented solution for replacement and DIY wiring. If your project can accommodate soldering and you do not require an integrated on/off switch, this is a practical way to get working battery power with clear red and black lead polarity.
FAQ
How much voltage do I get from a 3x AA battery holder?
Using three 1.5V AA batteries, the holder is for a 4.5V setup (3x 1.5V in series).
Does this battery holder include an on/off switch?
No, it does not include an on/off switch, so you would need to add one if your device requires switching.
Do the holders come with wires attached?
Yes. Each of the three holders includes red and black leads (with tinned wire ends) for soldering or wiring into a circuit.
What is the wire length on the leads?
The leads are about 5.9 inches (15 cm) long.
Are these good for replacement battery holders?
They are commonly used for replacement purposes, especially when a previous holder was damaged or affected by corrosion, as long as you are comfortable doing the wiring step.
Specifications
| Product Title | (Pack of 3 3 AA Battery Holder with Leads, 3 AA Battery Holder with Wires |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Name | AAA |
| Model Number | 3AA-3PC |
| Item Weight | 11 Grams |
| UPC | 739340317768 |
| Battery Capacity | 1.5 Volts |
| Voltage | 4.5 Volts |
| Reusability | Single Use |
| Unit Count | 3 Count |
| Battery Weight | 11 Grams |
Recommended next
DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case (1/2/3/4 Slots)
This DORHEA 12-pack bundle includes 1-, 2-, 3-, and 4-cell 18650 holders (with preinstalled red and black leads) for DIY battery projects and replacements. It is a budget-friendly way to build common 3.7V to 14.8V series configurations, with a key caveat: the included wire gauge is fairly small and the holders can be tight to remove individual cells.
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2 Pcs Metal Ry-obi 18V Battery Holder/Battery Wall Mount Rack for Ryobi 18V Battery Storage with 3 Slots
These 2-pack metal wall mounts help you store Ryobi 18V slide-style batteries in a cleaner, more organized way. Buyers like the heavy steel build, stable fit for Ryobi One+ batteries, and straightforward mounting, with the main caveat being that you need solid mounting hardware and a good screw fit to avoid small tilting.
2Pcs 18650 Battery Holder Li-ion Battery with Single Compartment, 18650 battery bank & battery backup
A compact 18650 battery holder plus a USB output and micro-USB charging module, sold as 2 sets. It is designed for DIY builds that need simple power management (3V and 5V options) and basic protection features, with a couple of practical tradeoffs around standby drain and guidance.