DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case (1/2/3/4 Slots)
Quick take
This 12-piece DORHEA bundle gives you 18650 holders for 1-, 2-, 3-, and 4-cell series builds, with red and black lead wires preinstalled to make wiring simpler for small electronics projects. It is a practical choice for DIYers who want budget storage and quick pack assembly, but buyers note the included wires are thin, and some holders feel tight when you need to remove a single cell.
Pros and cons
Pros
- Includes multiple configurations (1/2/3/4-slot, designed for 3.7V to 14.8V series output levels).
- Preinstalled red and black lead wires can simplify soldering and connecting for DIY projects.
- Spring-style cell retention makes installs and swaps straightforward when the pack is assembled.
Cons
- Included wire gauge is small, and some buyers prefer to replace the leads for their project.
- At least some holders can be difficult to pry open to remove individual cells.
- Not intended to charge cells through the holder (use it for output wiring, not charging).
What buyers think
Buyer feedback centers on how well these holders match common DIY needs. The most consistent themes are that the holders do function as expected for series configurations (so output levels scale with 1 through 4 cells). Many buyers describe the included leads as “cheap” feeling or thinner than expected, which can limit how comfortable the wiring is if your project requires heavier gauge wire or easier soldering. The physical retention gets mixed notes, with some users finding the cells, especially in single-cell holders, hard to remove. Fit is generally described as workable, including for flat-top cells. Overall, buyer-review evidence points to a value-focused bundle that works best when you are comfortable doing light custom wiring or adjusting for your project’s needs.
What this bundle is for
This is a mixed pack of 18650 battery holder cases meant for DIY electronics, small hobby builds, and battery-holder replacements. The holders are designed for 18650 cells in 3.7V form, and when you use multiple slots in series you can build pack output ranges commonly described as approximately 3.7V (1 cell), 7.4V (2 cells), 11.1V (3 cells), and 14.8V (4 cells). Each holder case uses a spring mechanism to keep the cell in place and reduce looseness during installation.
Key features that matter during installation
Preinstalled wire leads, but not heavy-duty
The bundle includes lead wires (red and black) on the holders, which is helpful if you want to prototype quickly. At the same time, multiple buyers indicate the included wire gauge is thinner than expected, and some find it less ideal for their wiring preferences. If your project needs thicker leads for robustness or easier handling, you may want to plan on swapping the leads.
Series configurations across 1 to 4 cells
Because these are series battery holders, the pack output is intended to scale with the number of cells installed. This is useful when your board or circuit expects a specific series voltage range, like 1S, 2S, 3S, or 4S setups.
Cell removal can be tight
Spring retention is convenient for holding cells securely, but some buyers report that the cells, particularly in the single-cell case, can be hard to pry out for charging or maintenance. If you expect frequent cell swapping, this is worth factoring into your workflow.
Compatibility and important limitations
- Battery included? No, the bundle provides the holders and leads, not the 18650 cells.
- Charging? The holders are for output and series wiring, not for charging through the case. Use your dedicated charging setup.
- Basic wiring safety note: Avoid shorting the positive and negative directly, since that can cause overheating of the wiring.
- Cell shape: Buyers report compatibility with flat-top cells, but always confirm your cell’s dimensions match the holder design before you build a pack.
Pros and cons in context
When this bundle is a good fit
- You are building DIY packs for microcontrollers, LED projects, toys, or similar low to mid complexity circuits and you want holders for multiple series voltages.
- You prefer a bundle approach, where you have 1S to 4S options on hand for experimentation and repairs.
- You do not mind doing some wiring customization if your project requires thicker wire or different soldering access.
When you should look elsewhere
- You need thick, sturdy leads out of the box, with no plan to replace wiring.
- You need to remove cells often and quickly, and you want an easier pry-open design.
- You want a charging-ready holder solution, these are not designed for charging through the case.
How it compares for common buyer priorities
Budget builders versus “grab and go” projects
This bundle leans budget-friendly. The included leads and multi-pack assortment help you prototype without buying separate holders for each cell count. If your priority is maximum convenience with heavier wire and quick swaps, you may prefer a holder style that is designed with more accessible wiring and easier cell removal. If your priority is just building a series pack and you are comfortable with simple wiring adjustments, this bundle can be a straightforward choice.
Verdict
The DORHEA 12PCS 18650 battery holder bundle is a sensible buy for DIYers who want a mix of 1-, 2-, 3-, and 4-cell series configurations in one package, with red and black leads already attached. The main things to watch are the thin wire gauge and the tight cell removal experience in some holders. If you can work with light wiring upgrades and you do not need frequent cell swapping, it offers good practical value for small electronics and maintenance projects.
FAQs
Do these holders include 18650 batteries?
No. The bundle includes the battery holder cases and the preinstalled red and black lead wires, but not the 18650 cells themselves.
Are the holders wired for series output?
Yes, the multi-slot holders are intended for series configurations so the output voltage level corresponds to the number of 18650 cells installed (1 to 4 cells).
Can I use this holder bundle to charge my 18650 batteries?
No. These holders are meant for output wiring, not charging through the battery case.
Are the included wires thick enough to solder easily?
Buyer feedback suggests the included wire gauge is relatively thin. If your project calls for heavier wire or you prefer more substantial leads, it may help to plan on replacing the wires.
How easy is it to remove cells from the holders?
Spring retention keeps cells secure, but some buyers report that cells can be difficult to pry out, especially in single-cell holders. If you expect frequent swaps, consider that tradeoff.
Specifications
| Product Title | DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case 3.7V, 1/2/3/4 x 3.7V Series DIY Battery Storage Boxes, 1/2/3/4 Slots Black Plastic Batteries Case for 18650 Battery |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | DORHEA |
| Manufacturer | DORHEA |
| Item Weight | 0.2 Kilograms |
| UPC | 701715471818 |
| Voltage | 3.7 Volts |
| Reusability | Single Use |
| Unit Count | 1 Count |
| Antenna Location | Toys |
| Recommended Uses For Product | Toys |
Available variants
Size
- 1-2-3-4 slot
- 1 slot
Recommended next
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2 Pcs Metal Ry-obi 18V Battery Holder/Battery Wall Mount Rack for Ryobi 18V Battery Storage with 3 Slots
These 2-pack metal wall mounts help you store Ryobi 18V slide-style batteries in a cleaner, more organized way. Buyers like the heavy steel build, stable fit for Ryobi One+ batteries, and straightforward mounting, with the main caveat being that you need solid mounting hardware and a good screw fit to avoid small tilting.
2Pcs 18650 Battery Holder Li-ion Battery with Single Compartment, 18650 battery bank & battery backup
A compact 18650 battery holder plus a USB output and micro-USB charging module, sold as 2 sets. It is designed for DIY builds that need simple power management (3V and 5V options) and basic protection features, with a couple of practical tradeoffs around standby drain and guidance.
DIANN 10pcs 18650 Battery Holder Single 1x 3.7V 18650 Battery Holder with Wires
A budget-friendly set of 10 single 18650 battery holders designed for DIY projects, with built-in red and black solder leads for easier wiring. Best for quick builds where you need a simple 1-cell 3.7V holder, but wire gauge is on the thin side, so plan for careful soldering and strain relief.