(Pack of 2 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch)
Quick take
This is a 2-pack of compact holders for two AA batteries, each with an ON/OFF switch and red/black wire leads for powering devices or wiring into a project. It is a practical choice for simple repairs or DIY builds where you want a battery “box” plus a convenient switch, but mounting may be less straightforward because the included screws may not fit well for everyone.
Pros and cons
Pros
- ON/OFF switch integrated into each 2-AA holder for easier control
- Includes wire leads (red and black) with tinned ends for quicker connections
- Good value for the number of holders included (2 pieces)
- Buyers report the holders work well for repairs and device replacements
Cons
- Included screws may be too small or not ideal for mounting the holder in some applications
- For longer runtimes, AA-only power may still limit sessions depending on your device’s draw
What buyers think
Buyer-review evidence is consistently positive on usability and basic performance, especially for replacing or restoring battery compartments and wiring projects. Several shoppers mention that the switch operates as expected and that the holders fit the intended repair use cases. The main recurring friction point is mounting hardware, where some buyers found the screws provided were not a great match for the holder.
What this battery holder is for
These battery cases are built for anyone who needs a simple way to power a device from two AA cells while also keeping an on-device power switch. The wired leads make it easier to connect the battery output to an existing circuit, rather than relying on a purely mechanical battery compartment.
Key features and specifications to know
Power setup
- Battery type: 2x AA batteries (each holder takes two 1.5V AA cells)
- Switch: built-in ON/OFF switch on the holder
Wired output for circuit use
- Lead colors: red and black
- Wire length: 5.7 in (14.5 cm)
- Cable insulation diameter: about 1 mm (0.0393 in)
- Lead ends: tinned wire ends for easier connection
Size and build
- Battery case dimensions: 2.71 x 1.34 x 0.75 in (6.88 x 3.4 x 1.9 cm)
- Material: ABS plastic
- Package includes: 2 battery holders and 2 screws
Pros and cons for different buyers
Best for
- Repairs where a device needs a new battery compartment with an inline switch
- DIY electronics projects that want a compact AA power source with wiring leads
- Builders who prefer an external on/off control instead of hard-wired “always on” connections
Who should be careful
- If your project relies heavily on the included screws for secure mounting, plan to verify fit first or be ready to use different hardware
- If your device uses a lot of power and you need long sessions, AA capacity may be a limiting factor regardless of the holder
Installation tips for using the switch and leads
- Identify which lead corresponds to positive and negative for your device wiring before connecting.
- Keep slack manageable, the wire length is 5.7 in, so measure your device enclosure before final placement.
- If the included screws do not seat well, consider alternative mounting methods like zip ties, clips, or adhesive solutions designed for electronics enclosures.
Price and availability
Pricing can vary, so it is worth checking the current listing details and total cost. If you are comparing value, focus on the fact that this bundle includes two holders, each with a switch and wired leads, which can reduce the work needed for multi-point or backup builds.
Verdict
This 2-pack of AA battery holders with an integrated ON/OFF switch and red/black wire leads is a solid, practical pick for repairs and small DIY power projects where wiring convenience matters. The main watch-out is mounting hardware, since some buyers found the provided screws not ideal, but the holders still tend to work reliably once connected and positioned correctly.
FAQs
Quick answers to common questions before you buy.
Is this battery holder compatible with rechargeable AA batteries?
The holder is designed for standard AA batteries at 1.5V each, so it should work with rechargeable AA cells as long as they fit physically and you follow correct polarity when wiring.
How long are the wire leads?
The red and black wire leads are 5.7 inches (14.5 cm) long, measured from the holder to the wire end.
Does it include an on/off switch?
Yes. Each holder includes an ON/OFF switch so you can control power directly at the battery case.
What are the dimensions of each battery case?
Each holder measures 2.71 x 1.34 x 0.75 inches (6.88 x 3.4 x 1.9 cm).
Are the included screws useful for mounting?
Some buyers report the screws provided can be too small or not ideal for their mounting setup. If your application needs screw-tight mounting, consider verifying fit and being ready with alternative hardware if needed.
Is a 2-AA holder enough for long run times?
Battery life depends heavily on your device’s power draw. For high-demand electronics, AA runtime may be limited even with a convenient holder, so plan around your expected usage.
Specifications
| Product Title | (Pack of 2 2 AA Battery Holder with Switch, 2X 1.5V AA Battery Holder Case with Wire Leads and ON/Off Switch |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Number | 2AA-Switch-Cable-2P-NEW-1 |
| Item Weight | 0.04 Kilograms |
| UPC | 619470453454 |
| Battery Capacity | 1.5 Volts |
| Voltage | 1.5 Volts |
| Reusability | Rechargeable |
| Unit Count | 2 Count |
| Battery Weight | 19 Grams |
| Antenna Location | Holder |
| Recommended Uses For Product | Holder |
Available variants
Item Package Quantity
- 20
- 1
- 40
Recommended next
DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case (1/2/3/4 Slots)
This DORHEA 12-pack bundle includes 1-, 2-, 3-, and 4-cell 18650 holders (with preinstalled red and black leads) for DIY battery projects and replacements. It is a budget-friendly way to build common 3.7V to 14.8V series configurations, with a key caveat: the included wire gauge is fairly small and the holders can be tight to remove individual cells.
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2 Pcs Metal Ry-obi 18V Battery Holder/Battery Wall Mount Rack for Ryobi 18V Battery Storage with 3 Slots
These 2-pack metal wall mounts help you store Ryobi 18V slide-style batteries in a cleaner, more organized way. Buyers like the heavy steel build, stable fit for Ryobi One+ batteries, and straightforward mounting, with the main caveat being that you need solid mounting hardware and a good screw fit to avoid small tilting.
2Pcs 18650 Battery Holder Li-ion Battery with Single Compartment, 18650 battery bank & battery backup
A compact 18650 battery holder plus a USB output and micro-USB charging module, sold as 2 sets. It is designed for DIY builds that need simple power management (3V and 5V options) and basic protection features, with a couple of practical tradeoffs around standby drain and guidance.