(Pack of 4 AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads)
Quick take
This 4-pack gives you two standard 2xAAA holders plus two matching 2xAAA holders with pre-attached red/black leads, making it easier to wire batteries into DIY electronics or replace a missing battery compartment. Each 2xAAA holder is designed for a 3V output (2 x 1.5V AAA). The tradeoff is simple design, there is no on/off switch and no protective cover, so it is best for projects where you can manage power routing yourself.
Pros and cons
Pros
- Includes both plain 2xAAA holders and 2xAAA holders with red/black leads for wiring.
- 3V output per 2xAAA holder (for devices expecting 2xAAA battery compartments).
- Leads use tinned wire ends and are about 5.9 in (15 cm) long, helpful for prototyping.
- Buyer feedback highlights solid fit and terminals that work well for making repairs or projects.
Cons
- No built-in on/off switch, so you may need a separate switch or controller.
- No battery cover included, which may be less ideal for applications exposed to bumps or debris.
- It is sized for AAA cells, so it will not fit devices designed for other battery formats.
What buyers think
Buyer-review evidence is limited but consistent on the practical use cases. The most common themes are that the holders fit as expected, work reliably for basic battery-powered projects, and the terminals help when swapping battery power into older or DIY devices. Reviewers also describe them as a good option for replacing missing battery compartments and enabling rechargeable-friendly builds, though detailed performance metrics like runtime are not widely covered.
What you are getting
This pack includes 4 battery-holder cases designed for AAA cells. It mixes two types: standard 2xAAA holders and 2xAAA holders with attached leads. That combination is helpful when your project needs both a conventional battery compartment and a wired connection point.
Key specs that matter for buying
Battery format and voltage
- Battery type: AAA (1.5V cells)
- Per-holder voltage: 3V from a 2xAAA holder (2 x 1.5V)
Lead wiring details (for the 2xAAA-with-leads units)
- Wire length: about 5.9 in (15 cm)
- Wire ends: tinned wire ends
- Polarity: red connects to the positive side, black connects to the negative side
Size and weight
- Single 2xAAA holder dimensions: 2.082 x 0.948 x 0.516 in (about 5.29 x 2.41 x 1.31 cm)
- Weight (with leads, per holder): about 0.176 oz (5 g)
DIY extension options (useful if your project needs higher voltage)
If you are building a multi-cell pack, these holders can be combined in a series-style DIY configuration. The included guidance describes joining multiple 2xAAA-with-leads holders to create higher-voltage configurations (for example, combining two for a 6V-style setup, three for a 9V-style setup, or four for a 12V-style setup). Whether that matches your device depends on your wiring plan and the exact power requirements of what you are powering.
Pros and cons for different buyers
Best for
- DIY electronics projects where you want quick, repeatable battery connections.
- Repairing battery compartments in older or off-brand devices that accept two AAA cells.
- Prototyping when you need a leaded battery source without committing to a custom pack.
Who should look elsewhere
- Outdoor or enclosure-free builds where you need a cover and physical protection for the cells.
- Projects that require an integrated power switch in the battery compartment.
- Devices needing a different battery format (these are specifically for AAA).
Value and how to decide if it is worth it
This is a straightforward, budget-friendly way to get both plain and leaded 2xAAA battery holders in one set. It tends to be most valuable when you need spare compartments for multiple builds or when you want one set for a conventional fit and another for wiring into your circuit. If your project needs a sealed housing, built-in switching, or a different voltage arrangement, you may prefer a purpose-built battery pack instead.
Frequently asked questions
What is the output voltage of the holder?
Each 2xAAA holder is designed for 3V output using two 1.5V AAA batteries.
Do the leaded versions include red and black wires?
Yes. The red wire connects to the positive side and the black wire connects to the negative side, with about 5.9 in (15 cm) of wire and tinned wire ends.
Is there an on/off switch on these battery holders?
No, these holders do not include an on/off switch.
Is there a cover for the battery compartment?
No cover is included.
Can I combine multiple holders for higher voltage projects?
You can combine holders in DIY configurations for higher-voltage setups, based on how you wire them in series. Make sure your wiring matches the power requirements of your device.
Specifications
| Product Title | (Pack of 4 AAA Battery Holder, 2 X 1.5V AAA Battery Holder with Leads |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LampVPath |
| Model Name | AAA |
| Model Number | 2AAA-4P |
| Item Weight | 4.99 g |
| UPC | 619470452709 |
| Battery Capacity | 1.5 Volts |
| Voltage | 3.7 Volts |
| Reusability | Single Use |
| Unit Count | 4 Count |
Recommended next
DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case (1/2/3/4 Slots)
This DORHEA 12-pack bundle includes 1-, 2-, 3-, and 4-cell 18650 holders (with preinstalled red and black leads) for DIY battery projects and replacements. It is a budget-friendly way to build common 3.7V to 14.8V series configurations, with a key caveat: the included wire gauge is fairly small and the holders can be tight to remove individual cells.
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2 Pcs Metal Ry-obi 18V Battery Holder/Battery Wall Mount Rack for Ryobi 18V Battery Storage with 3 Slots
These 2-pack metal wall mounts help you store Ryobi 18V slide-style batteries in a cleaner, more organized way. Buyers like the heavy steel build, stable fit for Ryobi One+ batteries, and straightforward mounting, with the main caveat being that you need solid mounting hardware and a good screw fit to avoid small tilting.
2Pcs 18650 Battery Holder Li-ion Battery with Single Compartment, 18650 battery bank & battery backup
A compact 18650 battery holder plus a USB output and micro-USB charging module, sold as 2 sets. It is designed for DIY builds that need simple power management (3V and 5V options) and basic protection features, with a couple of practical tradeoffs around standby drain and guidance.