Cable Matters Premium Braided 3.5mm to Mini XLR Headphone Cable (4 ft)
Quick take
This mini XLR to 3.5mm braided headphone cable is designed for replacement or on-the-go use with compatible Beyerdynamic and AKG mini XLR models. The included adapter lets you switch to a 1/4 inch (6.35mm) style connection for amplifiers and A/V gear, but buyers often call out that 4 ft may be a bit short for some setups.
Pros and cons
Pros
- Braided cable jacket plus metal connector construction (aimed at durability)
- Includes an adapter so you can use it with 1/4 inch (6.35mm) audio equipment
- Designed for mini XLR headphones with specific Beyerdynamic and AKG compatibility
- Buyers report it works with their headphones without added noise
Cons
- Length is 4 ft, and multiple buyers wish it were longer
- Limited fit certainty with some 3.5mm portable devices, where the plug may not stay fully seated
- Not compatible with certain versions of AKG (notably the AKG K371-BT)
What buyers think
Buyer-review evidence is mixed but points to a few clear themes. Most reports describe the cable as working properly with their mini XLR headphones, with no noticeable noise and a sturdy feel. Durability expectations are positive, especially compared with cables that reportedly developed breaks near the connection points. The most consistent usability complaint is the 4 ft length, which can feel tight depending on how you position your headphones and audio source. There is also at least one account of the 3.5mm end not staying fully seated in a specific portable setup, suggesting you should pay attention to how secure your device’s 3.5mm jack is.
Who this cable is for
This is a practical choice if you need a replacement mini XLR headphone cable or an extra shorter cable for portable use. It is especially relevant if you own compatible Beyerdynamic and AKG headphones that use a mini XLR style connection.
Compatible headphones (important)
It is listed as compatible with several popular models, including Beyerdynamic DT 1770 Pro and DT 1990 Pro, plus AKG models such as K182, K175, K245, K371, and Q701. It is also explicitly noted as not compatible with AKG K371-BT, so double-check the exact headphone model before buying.
Key features that matter in daily use
Dual use with the included adapter
The cable is set up so it can connect as mini XLR to 3.5mm, and it also comes with an adapter that lets you use it with 1/4 inch (6.35mm) style equipment. This is useful if you want one cable that can move between a phone, a computer, and a headphone amp or receiver.
Build quality and feel
Buyers tend to describe the cable as working reliably and feeling sturdy, and the design emphasizes metal connectors with a braided jacket. If your goal is to replace a cable that has started to fail near the plug or connection end, these construction choices are meant to help.
Portability tradeoff: 4 ft length
At 4 ft, the cable is a compromise between portability and reach. Many shoppers were fine with that length, but there is also clear sentiment that it can be short depending on your audio source location and chair setup. If you sit farther from your amp or prefer more slack, you may want a longer option.
Pros and cons, in plain terms
Pros
- Strong focus on durability, with braided jacket and metal connectors
- Adapter included for 1/4 inch (6.35mm) audio equipment use
- Designed to match common mini XLR Beyerdynamic and AKG headphone models
- Most feedback reports normal audio behavior, with no added noise
Cons
- 4 ft may limit reach for desk or home setups
- Some portable 3.5mm devices may not hold the plug securely, which can cause intermittent disconnects
- Not compatible with AKG K371-BT, so model verification is required
Is it worth it?
It is a solid value if you need a mini XLR replacement cable that you can also adapt to 1/4 inch (6.35mm) gear, and you are okay with the 4 ft length. If your main use is with a portable dongle or battery player, it is worth being cautious about plug fit, especially if your device’s 3.5mm jack is known to be loose or tight.
Comparison checklist (how to choose without guesswork)
- Check connector compatibility first: mini XLR headphones require the right cable, and K371-BT is specifically excluded.
- Match your audio source: 3.5mm for phones and most DACs, and 1/4 inch for amplifiers (adapter included).
- Decide on length: 4 ft is convenient, but less forgiving for desk setups than longer cables.
- Consider plug retention: if your portable device’s 3.5mm port is finicky, test carefully once connected.
Price and availability
For the current price and to confirm availability in the US, check the listing on Amazon.
FAQ
What headphones are compatible with this cable?
It is listed for several mini XLR Beyerdynamic and AKG models, including DT 1770 Pro, DT 1990 Pro, AKG K182, K175, K245, K371, and Q701. It is not compatible with AKG K371-BT, so confirm your exact model.
Does it work with 3.5mm and 1/4 inch connections?
Yes. The cable is designed for mini XLR to 3.5mm, and it includes an adapter that allows use with 1/4 inch (6.35mm) audio equipment.
How long is the cable?
The cable length is 4 ft. Some buyers find that sufficient for on-the-go use, while others wish it were longer for their preferred setup.
Is it good for portable DACs and headphone amps?
It can be, since it supports common 3.5mm use cases and includes an adapter for 1/4 inch gear. However, there is limited buyer feedback suggesting that some portable devices may not keep the 3.5mm plug fully seated, so plug fit can matter.
What is the main reason to buy a replacement mini XLR cable?
If your original cable is damaged, worn, or has started to fail near the connection point, a replacement like this can restore reliable connection and extend the useful life of your headphones.
Does the cable add noise or audio issues?
Most buyer feedback describes normal audio behavior with no reported noise when connected. As always, results can depend on correct compatibility and solid plug seating with your specific source device.
Specifications
| Product Title | Cable Matters Premium Braided 3.5mm to Mini XLR Headphone Cable 4 ft - Compatible with Beyerdynamic DT 1770 Pro, DT 1990 Pro, AKG K240, K182, K175, K182, K245, K371, and Q701 Headphones |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Extension Cords |
| Brand | Cable Matters |
| Manufacturer | Cable Matters |
| Connectivity Technology | XLR |
| Item Weight | 0.06 Kilograms |
| Color | Black |
| Connector Type | Auxiliary |
| Cable Type | 3.5mm |
| Compatible Devices | Beyerdynamic DT 1770 Pro, 1990 AKG K182, K175, K245, K371, Q701 headphones |
| Other Special Features of the Product | light |
| Connector Gender | Male-to-Male |
| Number of Pins | 3 |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Brand Name | Cable Matters |
| Model | 500050-4-N2 |
| UPC | 810115183136 |
| Part Number | 500050-4-N2 |
| Item Shape | Round |
| Special Feature | light |
Recommended next
ienza Replacement SC4 TRS-TRRS, TRS 3.5mm Female to TRRS Male (Rode/Movo mic adapter)
The ienza Replacement SC4 TRS-TRRS cable is a short 3.5mm microphone adapter designed to connect a 3-pole TRS mic output to a 4-pole TRRS input on smartphones and tablets. It is a straightforward fix if you are trying to keep using a compatible Rode or Movo style shotgun mic with a device that expects TRRS, with the main caveat being the phone-side adapter and plug order for devices that do not have a built-in 3.5mm jack.
NewFantasia 3.5mm to 2.5mm Male Audio Cable Compatible with Bose Noise Canceling 700, QC35, QC45, oe2, oe2i
This 3.5mm to 2.5mm replacement audio cable is designed for specific Bose over-ear models and includes an inline remote and microphone. Buyers generally like the braided, tangle-free build, working controls, and functional mic performance for calls. The main caveat is compatibility, especially for the mic and button controls across phones and controllers.
WH-1000XM4 Replacement Headphone Cable Compatible with Sony WH-1000xm5 WH-1000xm4 WH-1000xm3 MDR-1A,Cord Compatible with Sony MDR-XB950BT MDR-XB950N1 MDR-ZX770BN WH-xb910n WH-CH700N Headphone
A 1.5m 3.5mm aux replacement cable for select Sony WH and MDR over-ear models. It prioritizes straightforward wired listening with a soft TPE jacket and gold-plated 3.5mm connectors, making it a practical fix if your current cord is failing or too short. Main caveat: it only works for headphones (or sources) that support a 3.5mm jack, not for USB or wireless-only setups.
Cubilux 3.5mm TRRS Volume Attenuator Cable, 1/8-inch Headphone Extension Cord review
A 4-foot 3.5mm TRRS inline volume control cable that lets you fine-tune headphone or speaker listening without relying on phone or PC software. It supports mic passthrough (audio output volume control only) and is designed to attenuate, not amplify, so it is best for lowering overly-loud sources rather than boosting weak volume.