ienza Replacement SC4 TRS-TRRS, TRS 3.5mm Female to TRRS Male (Rode/Movo mic adapter)
Quick take
The ienza Replacement SC4 TRS-TRRS cable helps you connect a 3.5mm TRS (3-pole) microphone output to a TRRS (4-pole) smartphone or tablet input. It is a good replacement option if you need the specific TRS-to-TRRS wiring for a compatible mic workflow. The main buying caveat is that phone adapters matter on iPhones without a 3.5mm jack, and plug order in the cable chain can affect whether the phone uses the external mic versus the internal one.
Pros and cons
Pros
- Built for the TRS (microphone) to TRRS (smartphone/tablet) connection type, including a 3.5mm 4-pole TRRS male to TRS female configuration
- Designed specifically for pairing compatible Rode/Movo style mics with iPhones and other TRRS-required devices
- Compact, replacement-focused cable you can keep in your kit
- Buyer feedback is largely straightforward, with multiple mentions that it “works” and has a “perfect fit”
Cons
- Requires the correct TRS-to-TRRS setup, so it will not solve compatibility issues if your phone-side adapter does not support microphone input
- On some iPhones without a 3.5mm jack, plug order and adapter choice can determine whether you get direct external mic input
What buyers think
Buyer-review evidence for this cable is relatively limited in detail, but the recurring theme is simple: it works for the intended purpose when the connection chain is set up correctly. Overall, the feedback pattern suggests compatibility depends heavily on using the right TRRS-capable phone adapter and correct ordering.
What this adapter does (and why you might need it)
This is a 3.5mm microphone adapter cable that converts between two common audio plug formats: a TRS microphone output (3-pole) and a TRRS device input (4-pole). If you have a microphone that ends in a 3.5mm TRS plug, but your phone or tablet expects a TRRS input for mic audio, this cable provides the needed bridge.
It is intended as a replacement for specific Rode and Movo-style microphone adapters, so it is most useful when you want to keep the rest of your setup the same and only fix or replace the small cable that goes between mic and phone.
Compatibility and setup caveats that matter
Phone adapters on iPhones without a 3.5mm jack
If you are using an iPhone model that does not include a 3.5mm headphone jack (for example, iPhone X and later generations without the jack), you will need the right lightning-to-3.5mm adapter (or equivalent). Not all replacements can pass microphone input, and that can lead to behavior like the phone using its own microphone instead of the external mic.
Plug order in the chain
When you have multiple links in the chain (lightning adapter, then this TRS-to-TRRS cable, then the microphone), plug order can matter for how the phone interprets input. The practical takeaway is to ensure the iPhone-side adapter is the first link that supports microphone input, and the TRS-to-TRRS adapter follows in the correct position.
TRS versus TRRS: don’t assume all 3.5mm adapters are interchangeable
Because this cable is specifically wired as TRS (female) to TRRS (male), it will only be the right solution if your target device truly requires TRRS for microphone audio. If your phone or tablet uses a different input format, or your accessory expects a different pinout, you may get no audio or mic behavior you do not want.
Pros and cons in plain terms
Why it is a good fit
- You want a short, replacement-style cable for connecting a compatible 3.5mm TRS microphone output into a TRRS smartphone or tablet input.
- You are building a simple field-recording or interview setup and want a cable that matches the TRS-to-TRRS requirement instead of experimenting with unrelated audio adapters.
- Your setup includes (or you plan to use) a microphone workflow associated with Rode/Movo style mic adapters.
When you should think twice
- You are hoping to use it with a phone adapter that might not support microphone input. In that case, the cable cannot fix the limitation.
- You need plug-and-play behavior with no setup attention. Some setups may require careful ordering of the cable chain to ensure external mic input is selected.
Verdict: is the ienza Replacement SC4 TRS-TRRS worth it?
Yes, it is worth considering if you specifically need a TRS (3-pole) to TRRS (4-pole) 3.5mm microphone adapter cable for a smartphone or tablet, and you are replacing a missing or mismatched SC4-style cable. If you are using an iPhone without a 3.5mm jack, plan to double-check that your lightning-to-3.5mm adapter supports microphone input and that your connection order matches your intended recording workflow.
Price and availability
The price shown for this cable may vary over time. Check the live listing for the most current cost and quantity options.
FAQ
Does this cable work with iPhones that don’t have a headphone jack?
It can, but only if you use a lightning-to-3.5mm adapter that supports microphone input. Plug order in the chain can also affect whether the phone records from the external mic versus the internal mic.
What is the difference between TRS and TRRS for microphones?
TRS (3-pole) is commonly used for microphone outputs, while TRRS (4-pole) is often required by smartphones and tablets for microphone audio. This cable is designed to bridge that specific mismatch.
Is it compatible with Rode or Movo microphones?
It is intended as a replacement style cable for Rode and Movo mic adapter needs, based on the required TRS-to-TRRS connection.
Will it work with any 3.5mm microphone?
It should only work if your microphone output is a 3.5mm TRS connection and your phone or tablet expects TRRS for mic input.
How long is the cable?
The cable is a short, replacement-focused length (listed as 3 inches in the product context).
Specifications
| Product Title | ienza Replacement SC4 TRS-TRRS, TRS 3.5mm Female to TRRS Male Rode Movo BOYA Recording Microphone Adapter Cable Cord for iPhone, Smartphone & Other Devices |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Extension Cords |
| Brand | ienza |
| Manufacturer | ienza |
| Item Weight | 0.02 Kilograms |
| Color | Black |
| Connector Type | Auxiliary |
| Cable Type | AUX, Lightning, USB |
| Compatible Devices | Smartphone |
| Other Special Features of the Product | Data Transfer |
| Compatible Phone Models | iPhone X |
| Connector Gender | Male-to-Female |
| Number of Pins | 4 |
| Maximum Voltage | 5 Volts (DC) |
| Recommended Uses For Product | Connecting a 3-pole microphone to a 4-pole input on electronic devices, replacing specific Rode and Movo cables |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Item Shape | Round |
| Brand Name | ienza |
| Customer Package Type | sealed anti-static bag |
| Model | 6543885032 |
| UPC | 710382723557 |
| Part Number | 6543885032 |
| Unit Count | 1.0 Count |
| Special Feature | Data Transfer |
Recommended next
NewFantasia 3.5mm to 2.5mm Male Audio Cable Compatible with Bose Noise Canceling 700, QC35, QC45, oe2, oe2i
This 3.5mm to 2.5mm replacement audio cable is designed for specific Bose over-ear models and includes an inline remote and microphone. Buyers generally like the braided, tangle-free build, working controls, and functional mic performance for calls. The main caveat is compatibility, especially for the mic and button controls across phones and controllers.
WH-1000XM4 Replacement Headphone Cable Compatible with Sony WH-1000xm5 WH-1000xm4 WH-1000xm3 MDR-1A,Cord Compatible with Sony MDR-XB950BT MDR-XB950N1 MDR-ZX770BN WH-xb910n WH-CH700N Headphone
A 1.5m 3.5mm aux replacement cable for select Sony WH and MDR over-ear models. It prioritizes straightforward wired listening with a soft TPE jacket and gold-plated 3.5mm connectors, making it a practical fix if your current cord is failing or too short. Main caveat: it only works for headphones (or sources) that support a 3.5mm jack, not for USB or wireless-only setups.
Cubilux 3.5mm TRRS Volume Attenuator Cable, 1/8-inch Headphone Extension Cord review
A 4-foot 3.5mm TRRS inline volume control cable that lets you fine-tune headphone or speaker listening without relying on phone or PC software. It supports mic passthrough (audio output volume control only) and is designed to attenuate, not amplify, so it is best for lowering overly-loud sources rather than boosting weak volume.
NewFantasia Replacement Audio Upgrade Cable Compatible with Sennheiser HD650, HD600, HD580, HD660S, HD58X, HD565, HD545, HD535, HD525, HD265, Massdrop HD6XX
The NewFantasia replacement upgrade cable is a 1.5m (4.9ft) audio lead made for select Sennheiser HD models and Massdrop HD6XX headphones. It focuses on comfortable handling (shielding, OFC wire, and a softer, grippy feel) and includes a 3.5mm male plug with a 6.35mm adapter. The main tradeoff to consider is length, plus the fact that a “sound improvement” is subjective and depends on your setup.