Silicon Power P34A60 1TB NVMe M.2 2280 SSD

The Silicon Power SP001TBP34A60M28 is a 1TB NVMe M.2 2280 SSD on a PCIe Gen3x4 interface. The provided specs list up to 2,200MB/s read and 1,600MB/s write speeds, 600TBW endurance, and TLC flash. Based on that, it is a straightforward upgrade option for systems with the right M-key M.2 slot, but it is not meant for SATA-only devices or buyers specifically looking for Gen4 speeds.

Pros

  • Works with M-key M.2 NVMe systems.
  • Gen3x4 design suits many older laptops and desktops.
  • 600TBW is a clearly stated endurance figure.
  • Can be a practical boot-drive upgrade when SATA is the alternative.

Cons

  • Will not fit B-key-only M.2 slots.
  • Not a Gen4 drive.
  • Warranty length is not stated here, only that TBW can limit coverage.

What this SSD is

The specifications covers the Silicon Power P34A60 / SP001TBP34A60M28 in 1TB, M.2 2280 format. That makes it a mainstream internal SSD for PCs and laptops that already have NVMe support.

The actual warranty length is not provided here, so it should not be inferred.

Compatibility matters most

The drive requires an M-key M.2 connector. It does not have a B-notch, so a B-key-only socket will block installation. That is the main thing to verify before buying, especially in older laptops or compact systems.

Some user snippets describe successful use in Dell laptops, a Dell workstation with a PCIe adapter card, a Raspberry Pi 5 NVMe setup, and a Jetson Orin Nano project.

Performance expectations

The listed 2,200MB/s read and 1,600MB/s write figures place this in normal Gen3 NVMe territory. That should be enough for everyday booting, application launches, and general file storage, especially if you are replacing a hard drive or SATA SSD.

The user comments include some higher benchmark numbers, but they reflect specific setups and should not be treated as guaranteed performance for every system.

Reviewed productBuy on Amazon

Who it suits

This SSD makes the most sense for buyers who need an affordable NVMe boot drive for an M-key M.2 system. It is also a sensible choice for systems where heat, size, or compatibility make a lower-key Gen3 drive preferable to chasing maximum speed.

It can also suit hobbyist builds and adapter-based upgrades, provided the host platform supports NVMe booting and the slot keying is correct.

Who should look elsewhere

Skip it if your device only accepts SATA M.2 storage or a B-key-only module. Skip it as well if you are specifically shopping for Gen4 performance.

If your system is unusual or sensitive to firmware compatibility, the limited user reports are not enough to make this a universal recommendation. In that case, checking the exact host device support matters more than the SSD’s headline speed.

Alternatives and trade-offs

The alternatives include two SATA SSDs from Crucial and Western Digital, plus a Crucial P310 Gen4 NVMe model. The SATA drives are only relevant if your device needs a 2.5-inch SATA drive or a SATA-only bay; they are not direct substitutes for this NVMe model.

The Crucial P310 is the closest alternative in interface and form factor because it is also an NVMe M.2 2280 drive, but it is a Gen4 product. That makes it the better fit if your system supports Gen4 and you want more headroom than this Gen3 drive offers.

Reviewed productBuy on Amazon

The buying decision

This is a sensible Gen3 NVMe upgrade if you have confirmed M-key M.2 support and do not need top-end speed.

Product details and Amazon customer ratings as of .

Available variants

Capacity

  • 2TB
  • 1TB (Pack of 3)
  • 256GB
  • 1TB
  • 128GB
  • 512GB

Style

  • 2TB
  • SSD
  • 256GB
  • 128GB
  • 512GB

Recommended next