Replacement Cable for SHURE SRH840 SRH940 SRH440 SRH750DJ Headphones Braided Wire Audio Upgrade HiFi Stereo Cord 150cm/4.5ft
Quick take
This braided, tangle-resistant replacement audio cable is built for specific Shure SRH models (SRH840, SRH940, SRH440, SRH750DJ). At 150cm (about 4.5 ft), it is a practical length for desk use and everyday movement. The main caveat is connector feel, some buyers report the 3.5mm side does not lock into place as firmly as they expected.
Pros and cons
Pros
- Braided, tangle-free style cable that buyers say is less annoying than softer stock cables.
- Designed for Shure SRH840/SRH940/SRH440/SRH750DJ compatibility.
- 150cm (4.5 ft) length, with a 2.5mm headphone-side end that includes a locking fit.
- Includes multiple plug options via adapters (3.5mm male plus 6.35mm adapter, with 2.5mm male on the headphone side).
Cons
- Some buyers mention the 3.5mm connector does not lock in place, which may matter if you move around a lot.
- It is a replacement cable only, the headphones themselves are not included.
What buyers think
Buyer-review evidence is limited but consistent on a few product-relevant themes. Many users describe the cable as an upgrade over softer stock wiring, highlighting reduced tangling and snagging in daily use. Fit compatibility is a common positive point, with buyers reporting it works well on supported Shure SRH models. Sound is generally described as working properly, with no widespread claims of audio issues. The most notable recurring caution is connector retention, where at least some buyers feel the 3.5mm side does not lock as firmly, so care may be needed if the plug is pulled or the cable is moved frequently.
What this cable is, and what it replaces
This is a replacement headphone audio cable made for select Shure SRH models: SRH840, SRH940, SRH440, and SRH750DJ. It includes the headphone-side end (2.5mm male) and a standard audio output plug that works with a 3.5mm connection, plus a 6.35mm (1/4-inch) adapter for larger headphone jacks.
Key specs that affect buying decisions
Length and everyday usability
The cable length is 150cm (about 4.5 ft). That typically lands in the sweet spot for many desk and in-room setups, offering more reach than very short cords without creating excessive slack.
Connector and adapter setup
The headphone-side connector uses a 2.5mm male end with a locking-style fit. On the audio side, the cable includes a 3.5mm male plug, with a 6.35mm adapter to match standard headphone ports on many amplifiers and some audio interfaces.
Braided, tangle-free design
The outer jacket is described as braided and tangle-free. Buyers specifically call out fewer snags and less “grabby” behavior compared to some softer cables.
Pros and cons, in real-world terms
When this is a good fit
- You own one of the supported Shure headphones and need a replacement cable.
- You want a braided cable that is less likely to tangle or snag during daily use.
- You need flexibility for different device ports, using the included 3.5mm plug plus the 6.35mm adapter.
- You prefer a moderate 150cm length for desktop listening or easy movement around the room.
When you may want to look elsewhere
- You rely on a firmly locking 3.5mm connection and you regularly move the cable while listening, because some buyers report the 3.5mm side does not lock in place.
- You are shopping for a longer run (not the 150cm length) or need a different connector style, since this product is tailored to the Shure SRH series listed above.
Price and availability
This cable is positioned as a budget-friendly replacement option compared to purchasing a dedicated OEM cable for the same Shure models. For the most current pricing and stock status, check the listing.
Compatibility checklist before you buy
- Confirm your headphone model is one of: SHURE SRH840, SRH940, SRH440, or SRH750DJ.
- Check your audio device connection type (3.5mm versus 6.35mm/1/4-inch). The package supports both via adapter.
- If cable retention matters, plan to be gentle with the 3.5mm plug and avoid strain at the connection point, since some users report a non-locking feel on that side.
Verdict
If you need a replacement cable for a supported Shure SRH headphone and you value a braided, tangle-resistant feel, this option is a straightforward buy. The biggest decision point is the connector retention on the 3.5mm side, so if you tend to move around or tug cables during use, you may want to handle connections carefully or consider an alternative with a firmer lock behavior.
FAQ
Is this cable compatible with SHURE SRH840 and SRH940?
Yes. It is made for SHURE SRH840 and SRH940, as well as SHURE SRH440 and SRH750DJ.
What is the cable length?
The cable length is 150cm (about 4.5 ft).
Does it include a 6.35mm (1/4-inch) adapter?
Yes. It includes a 6.35mm adapter to go along with the 3.5mm male plug.
Will the 3.5mm plug lock into place?
Some buyers report that the 3.5mm side does not lock in place as firmly as they expected. If you move around while listening, avoid strain on the plug and connection.
Does the package include the headphones?
No. The package includes the replacement cable only.
Is it worth buying if I just want a basic replacement?
For supported Shure SRH models, it is a practical replacement choice, especially if you want a braided, tangle-resistant cable and the included adapter options for different audio ports.
Specifications
| Product Title | Replacement Cable for SHURE SRH840 SRH940 SRH440 SRH750DJ Headphones Braided Wire Audio Upgrade HiFi Stereo Cord 150cm/4.5ft |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Extension Cords |
| Brand | NEW NEOMUSICIA |
| Manufacturer | NEW NEOMUSICIA |
| Item Weight | 18 Grams |
| Color | the same as the picture show |
| Connector Type | Auxiliary |
| Cable Type | AUX |
| Compatible Devices | Headphone |
| Other Special Features of the Product | Braided, Tangle Free |
| Compatible Phone Models | SHURE SRH840, SHURE SRH940, SHURE SRH440, SHURE SRH750DJ |
| Connector Gender | Male-to-Male |
| Number of Pins | 2 |
| Maximum Voltage | 5 Volts (DC) |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Item Shape | Round |
| Brand Name | NEW NEOMUSICIA |
| Model | 4330154991 |
| UPC | 717880660971 |
| Part Number | 4330154991 |
| Unit Count | 1.0 Count |
| Special Feature | Braided, Tangle Free |
Recommended next
ienza Replacement SC4 TRS-TRRS, TRS 3.5mm Female to TRRS Male (Rode/Movo mic adapter)
The ienza Replacement SC4 TRS-TRRS cable is a short 3.5mm microphone adapter designed to connect a 3-pole TRS mic output to a 4-pole TRRS input on smartphones and tablets. It is a straightforward fix if you are trying to keep using a compatible Rode or Movo style shotgun mic with a device that expects TRRS, with the main caveat being the phone-side adapter and plug order for devices that do not have a built-in 3.5mm jack.
NewFantasia 3.5mm to 2.5mm Male Audio Cable Compatible with Bose Noise Canceling 700, QC35, QC45, oe2, oe2i
This 3.5mm to 2.5mm replacement audio cable is designed for specific Bose over-ear models and includes an inline remote and microphone. Buyers generally like the braided, tangle-free build, working controls, and functional mic performance for calls. The main caveat is compatibility, especially for the mic and button controls across phones and controllers.
WH-1000XM4 Replacement Headphone Cable Compatible with Sony WH-1000xm5 WH-1000xm4 WH-1000xm3 MDR-1A,Cord Compatible with Sony MDR-XB950BT MDR-XB950N1 MDR-ZX770BN WH-xb910n WH-CH700N Headphone
A 1.5m 3.5mm aux replacement cable for select Sony WH and MDR over-ear models. It prioritizes straightforward wired listening with a soft TPE jacket and gold-plated 3.5mm connectors, making it a practical fix if your current cord is failing or too short. Main caveat: it only works for headphones (or sources) that support a 3.5mm jack, not for USB or wireless-only setups.
Cubilux 3.5mm TRRS Volume Attenuator Cable, 1/8-inch Headphone Extension Cord review
A 4-foot 3.5mm TRRS inline volume control cable that lets you fine-tune headphone or speaker listening without relying on phone or PC software. It supports mic passthrough (audio output volume control only) and is designed to attenuate, not amplify, so it is best for lowering overly-loud sources rather than boosting weak volume.