Power Strips
Electronics / Accessories & Supplies / Power Strips & Surge Protectors / Power Strips
55 review articles in this category branch, ordered by product demand and buyer signal strength.
Electronics / Accessories & Supplies / Power Strips & Surge Protectors / Power Strips
Electronics / Accessories & Supplies / Power Strips & Surge Protectors / Surge Protectors
The Power Watchdog Smart RV Surge Protector (50 Amp) is a plug-in style surge protection and power monitoring solution built for RV shore power. It adds real-time Bluetooth monitoring of voltage, amperage, and wattage, plus automatic shutdown and delayed restart when power is out of safe range, and it uses a replaceable surge module for easier long-term ownership.
A 2-pack surge-protected power strip set with a 12 ft braided extension cord, 6 AC outlets, and 4 USB charging ports (USB-A plus USB-C). Built for desk, home office, dorm, and tight-space setups where you want a flat 45° plug and wall-mount options, with overload protection and a 1080-joule rating.
The Addtam 2 Pack Power Strip Surge Protector is a practical power + charging solution for desks, home offices, and dorm setups, with five widely spaced AC outlets and three USB ports (including USB-C). It also includes a 1080-joule surge protection system and an overload shutoff feature, plus a flat plug and wall-mount holes to keep cables tidy.
POWRUI’s surge protector power strip combines 8 widely spaced AC outlets with 4 USB charging ports (including USB-C) and a 6 ft flat plug cord, making it a good fit for desks, dorms, and home offices where adapters block traditional power strips. The main caveat is that total power draw still matters, and the outlets may be less practical if you plan to run multiple higher-wattage appliances at once.
A compact, flat-profile power strip for travel, dorms, and especially cruise ships. It combines three AC outlets with multiple USB ports in a right-angle design, plus ETL-listed safety protections, but it does not include surge protection (which can matter for non-cruise use).
A tower-style surge protector power strip that brings 12 AC outlets and 4 USB ports (including USB-C) into a smaller footprint. Best for desks, dorm rooms, and offices where you need more plug space without a tangle of bulky strips, with built-in overload and 1200-joule surge protection ratings. Main caveat: the long list of devices you can power depends on staying under the unit’s total power limits.
The Addtam USB wall charger surge protector is a flat, wall-mountable outlet extender that combines five widely spaced AC sockets with four USB charging ports (including USB-C) and an 1800J surge protection circuit set. It is a strong fit for kitchens, home offices, and nightstands where you need more plug space and faster charging in a single wall unit, with the main caveats being outlet plug compatibility on some designs and a shared USB current limit.
TESSAN’s surge-protected tower power strip combines 11 AC outlets with 3 USB ports (including USB-C) in a flat, space-saving design. It is a strong fit for desks, dorm rooms, and tight plug locations, with a main caveat: wide device charging depends on plug sizes and total wattage.
A space-saving 8-outlet surge protector from Belkin, designed for desks and entertainment setups where wall plugs, large power bricks, and cable clutter are real problems. Strong outlet spacing and a flat 3-prong plug help with awkward layouts, and buyers report long-term reliability, but it is a physically larger strip and it is best kept for low-to-moderate power electronics.
This wall outlet extender turns one duplex outlet into 5 AC outlets plus multiple USB ports, with a detachable shelf for keeping small devices off the counter. It also includes an LED night light with a light sensor, plus 1800J surge protection, making it a practical upgrade for bedrooms, dorm rooms, and home offices. The main thing to double-check is compatibility with your specific outlet type, especially if you have GFCI or other special receptacles.
The Southwire Surge Guard 30 Amp Portable RV Surge Protector (model 44280) is built for travel trailers and pop-ups that want plug-in surge protection plus “enhanced diagnostics” for campground hookups. It’s compact, uses a 30A rating and a 2100-joule protection rating, and includes an LED indicator set to help you verify park power before connecting your RV.
A space-friendly surge protector power strip with a 10 ft flat plug extension cord, 12 widely spaced AC outlets, and 4 USB ports, designed for desks, home offices, and wall-mounted charging setups. If you need room for bulky adapters and a cleaner charging station, it’s a strong fit, with the main caveat being that 1050J protection is most relevant for everyday spikes, not full lightning-level scenarios.
The Anker 9-in-1 desktop charger combines a compact surge-protected power strip with 100W-class USB-C charging for phones, tablets, and some laptops. It is a strong fit for desks and nightstands where you want fewer wall adapters and a cleaner cable setup, with a key limitation: the full 100W USB-C output is only available when using either USB-C1 or USB-C2 individually.
Belkin’s 6-outlet surge protector turns one wall plug into six UL-listed, surge-protected outlets with a 10 ft cord. It’s a good fit for home offices and entertainment setups where you want space-saving outlet access and basic protection for everyday electronics, with a main caveat that it doesn’t include a visible “protected” status light.
The Refrigmatic WS-36300 is an electronic voltage and surge protector designed for domestic refrigerators (up to 27 cu. ft.), ice makers, and small air conditioners (up to 5000 BTU). It monitors incoming voltage and disconnects power when voltage runs too high or too low, then uses a delay before reconnecting. The main tradeoff is that it can still interrupt power during unstable conditions, which is a feature for protection, but may feel inconvenient if you want the fridge to keep running no matter what.
The Kensington Guardian is a six-outlet surge protector with a 15-foot cord, designed to give you more reach for home office and entertainment setups. It’s built for everyday use, includes an indicator light for surge protection monitoring, and is rated for 540 joules with a limited lifetime warranty and UL/CSA certification.
The SIEMENS BoltShield QSPD2A065P is a plug-in, whole-home style surge protection device designed to fit most Siemens panels. It provides up to a 65kA surge current rating, includes a visible and audible alarm indicator when replacement is needed, and can be installed close to the distribution system for shunting of transients.
A compact, cute pink power strip that adds 3 AC outlets plus 4 USB ports (including 2 USB-C) for desk and bedside charging. It’s designed for multiple devices in one place, with surge protection and safety features, but the 5 ft cord length may be limiting if your outlet is behind furniture.
A heavy-duty, wall-mountable 8-outlet power strip built for garages, workshops, and desks, with wide-spaced outlets that accommodate bulky power bricks. It includes a switch and a built-in 1200J surge protector, and it’s designed for 15A/125V indoor use (not for rack equipment). Main tradeoff: the spacing helps most “wall-wart” plugs, but very large adapters may still force you to skip an outlet.
This two-unit surge protector combo is designed to protect a refrigerator and a washing machine from high and low voltage, brownouts, and power surges. Key features include voltage status light indicators and a built-in delay period (30 seconds, with instructions to wait longer for first use) after power returns so appliances do not restart immediately into unstable power.
The BSEED 3-outlet surge protector power strip is a compact 120V option designed for appliances that are sensitive to voltage issues, such as refrigerators and freezers. It includes LED status indicators and a built-in delay (up to about 3 minutes) to help protect connected equipment when power conditions stabilize. Main caveat: it is built for North American 120V use and only has three outlets, so it may not fit larger appliance setups.
The Refrigmatic MEGA is a compact, one-outlet electronic voltage protector designed for larger refrigerators and freezers (27 cu. ft. or more). It uses high and low voltage cutoffs (140VAC/90VAC) plus a delay period after outages, and includes a quick restart button for faster power restoration. The main buying caveat is that some buyers treat it as more of a voltage disconnect than a full, high-joule surge suppressor, so “layering” protection may be a smart move if your priority is transient surge suppression.
The Addtam flat plug surge protector power strip is built for busy desks, dorms, and home offices, combining 6 AC outlets with 4 USB ports (including 2 USB-C). It also includes 900J surge protection and multiple safety protections, but its flat design and 5 ft cord are best suited to compact setups rather than heavy cable runs.
The HOPOW flat plug power strip is built for tight spaces, using a 0.33-inch slim, 45-degree plug and a 6-foot flat cord that helps hide cables behind furniture. It combines 5 AC outlets with 3 USB ports (including USB-C) and includes a 1700-joule surge protector, making it a practical desk, dorm, or home-office charging hub. The main tradeoff to consider is whether its specific wall-mount screw slot style will work for your setup.
A long, space-saving surge protector power strip that combines 6 AC outlets with 4 USB ports (including USB-C) and a right-angled flat plug for easier cable management behind furniture. Best for dorm rooms, home offices, and multi-device setups where you want AC power plus phone and tablet charging in one spot, with the main tradeoff being that the USB output is a shared total rather than separate fast-charging capacity for each port.
A slim, flat-plug power strip that combines 8 AC outlets with 4 built-in USB ports (2 USB-C, 2 USB-A). It includes 900J surge protection and supports up to 35W fast charging on one USB-C port, making it a strong option for dorm rooms and home offices where outlets are limited.
A compact desk-friendly power strip that combines a dimmable LED lamp with a 5 ft extension cord, 3 AC outlets, and 4 USB charging ports (2 USB-C, 2 USB-A). Best for small home offices, bedrooms, and dorm desks where you want one plug for light plus device charging, with the main tradeoff being that the lamp base can feel top-heavy without enough weight from plugged-in devices.
A desk-edge mounted power strip that combines 9 AC outlets with 8 USB ports (including dual USB-C PD) and a 10ft ultra-thin flat plug to keep cords off the floor. It is best for home offices, standing desks, and anyone who wants more reach without messy extension cords, with the key limitation that it only clamps to tabletops up to 1.7" thick.
The Fosmon 4 Outlet Small Surge Protector Power Strip is a compact, wall-mountable surge protector with a flat plug and a short 3 ft cord, designed for tidy setups behind furniture or in small offices. It offers four grounded outlets, 1875W (15A) capacity, and 490 joules of surge suppression, with a lighted on/off switch and a “protected” LED indicator. The main tradeoff is limited cord length and outlet spacing, so it may not suit crowded plugs or long-distance cable runs.
The SANUS On-Wall low-profile surge protector is designed to fit tight spaces while expanding your surge-protected outlet capacity to 6 AC outlets. It adds three lines of protection, includes EMI/RFI signal filtering, and uses fireproof MOV construction, making it a strong option for AV setups and home offices that need both space efficiency and protection.
Anker’s 10-in-1 outlet extender combines 6 wide-spaced AC outlets with 4 USB ports (2 USB-C, 2 USB-A) and 300J surge protection in an ultra-thin, low-profile design. It is a strong option for dorm rooms, nightstands, and home office desks where you need more usable plug space and cleaner cable management, with one key caveat: the USB power sharing and laptop compatibility limitations mean it may not suit everyone’s devices.
The CCCEI heavy duty surge protector power strip is built for high-need spaces like workshops and garages, with a 6-foot, 12-gauge cord, four wide-spaced outlets, and independent 20-amp circuit breakers plus individual on/off switches. The main thing to double-check is your load, since it is designed around a 20-amp, 1875W maximum (don’t exceed that), and it is intended for indoor use (protect it if used outdoors).
A space-saving power strip tower that combines 9 AC outlets with 8 USB ports (4 USB-C, 4 USB-A) and includes surge protection (1080J) plus an overload circuit breaker (15A/1875W). Best for desks, dorm rooms, and offices where you need lots of connections without a tangle of cords, but keep an eye on total power limits if you plan to run high-wattage appliances.
A compact travel power strip that combines multiple international plug types with 6 widely spaced AC outlets and 3 USB ports (including USB-C). Best for travelers who need to charge several devices at once, with the main tradeoff being that its multi-plug design can feel physically bulky.
A compact, flat-profile power strip designed to convert older two-prong outlets into grounded-style usability, while adding extra AC outlets and USB charging. Best for older homes and tight spaces, but it is still a two-prong-to-three-prong adapter use case, so it is not a true replacement for proper grounded wiring.
A compact, wall-mountable surge protector power strip with a 3-foot flat cord, 6 AC outlets, and 4 USB ports for desks, kitchens, and bedrooms. It’s designed for clutter-free placement, but it has a modest 3-foot reach and a max load of 1625W/13A, so heavy appliances still need attention.
A compact, ultra-thin flat-plug power strip that turns one wall outlet into 4 AC + 3 USB for travel, dorms, and tight spaces. It has fast USB charging and a short 3-foot cord, but it has no surge protection, so it is not ideal if you want that feature at home.
A compact 6-outlet, 2-foot power strip with a wall-mount option, built-in power switch, and integrated 15A circuit breaker. It is a practical pick for behind furniture, counters, and workshops, with the main limitation that it is not a surge suppressor.
The LIDER 6 Outlet Surge Protector Extender adds six AC outlets plus three USB charging ports (up to 4.2A total) to one wall duplex space. It’s designed for better plug access with angled, spaced outlet placement, and includes point-of-use surge protection (1500J) in a compact matte white housing. The main tradeoff to note: it does not include a visible “tamper resistant” shutter feature, and it may require breaker cycling to reset after a surge event.
The Go Green Power Inc. GG-16103MINBK is a compact 6-outlet surge protector with a 15A, 1875W resettable breaker, mounting keyholes, and a 90-joule protection rating. It’s a straightforward, no-frills option for desks, TV cabinets, and home setups where you want multiple devices covered at once, with the main caveat being its basic surge protection spec rather than premium protection features.
A compact, wall-mounted outlet extender that turns one standard receptacle into 8 AC outlets plus 3 USB charging ports, with LED power indication and surge protection rated at 1680 joules. It is a solid fit for dorms and home offices where you need more plugs close together, but it requires a compatible 3-prong wall outlet setup.
ABB THQLSURGE2 is a Type 1 whole-house surge protective device (SPD) for 120/240 VAC panels, built to add protection at the breaker-panel level. Buyers generally report easy installation and good fit with GE PowerMark load centers, but note it can be physically wider than a standard breaker and that it is hard to verify it is actively working day to day.
A wall-mount multi-outlet extender that adds 6 AC outlets plus 4 USB ports, with 1050J surge protection and an integrated dimmable night light. Best for homes, offices, and dorm setups where you want more plug space at one wall outlet, with the main caveat that its USB-C power is not suitable for many laptop charging needs.
A compact 3-outlet wall plug surge protector from Fosmon, designed to add grounded outlets for appliances like a refrigerator, microwave, or washing machine. It emphasizes 1200J surge protection, ETL-listed safety, and a tidy, space-saving form factor, but it is limited to a maximum 15A/1875W load, so it is best for smaller plug-in appliances.
The Proxicast coaxial lightning arrester is an inline, 50 ohm UHF-female (SO-239) surge protector designed for outdoor antenna coax feeds. It’s built for bi-directional coax protection up to 3 GHz with low insertion loss, plus DC pass-through for powering active antennas or LNAs. The main buying caveat is that proper grounding and weather-sealed installation matter, and very high-power operators may need to match the discharge tube to their use.
Eaton BRPSURGE is a Type 2, 2-pole, plug-on-neutral surge protective device designed for Eaton plug-on-neutral panels. It provides whole-home protection on the load side and includes an LED status indicator, with an install experience that buyers generally describe as straightforward. The key caveat is compatibility, it is not a one-size-fits-all surge protector and it is not “smart” for monitoring.
The QWORK Voltage Protector 2-Pack is a simple, single-outlet voltage protection setup designed for 120V appliances that can be sensitive to unstable power. It includes high/low voltage monitoring, a 3-minute safety delay after anomalies, and LED status indicators for quick visibility.
An electricity-saving plug-in device that claims to optimize power factor and stabilize current by monitoring voltage fluctuations. Best for shoppers who want a simple, plug-and-play option for home or office outlets, but the real-world bill impact may take time, and results are not guaranteed.