TV Cord Hider, 70.8in Cord Covers for 2-3 Wires on Wall
Quick take
This paintable, self-adhesive cord hider kit is designed to tuck 2 to 3 regular wires out of sight along a wall, baseboard, or TV setup. Installation is drill-free, but the adhesive foam tape is meant to bond best to flat, non-textured surfaces, so wall condition matters.
Pros and cons
Pros
- Self-adhesive design, no screws or drilling required
- Paintable white cord covers to help them blend into your wall
- Made to enclose and route wires, reducing visible clutter around a mounted TV
- Cut to length with scissors or a utility knife if needed
Cons
- Adhesion works best on smooth, non-textured walls (performance can drop on rough surfaces)
- Wire capacity is intended for about 2 to 3 wires, with tighter spacing as you approach 3
- If you need frequent re-access to the wires, paint can be affected if you repeatedly open and close the cover
What buyers think
Buyer-review evidence emphasizes how clean and tidy the result looks once installed, with many comments pointing to fast, straightforward setup. Multiple reviews also highlight that the adhesive tends to stick well on the right kind of wall surface and that the covers do a good job hiding cords for TV or desk setups. A smaller number of reviews mention a practical tradeoff: if you reopen the cord covers after painting or closing them, the paint finish may not stay as smooth.
Buyer-review evidence is limited for topics like long-term adhesion across different wall textures, installation in humid environments, or day-to-day durability beyond the overall “solid” feel described in reviews.
Who this cord hider is best for
This kit makes the most sense when you want a simple, low-effort way to clean up wall-mounted or near-wall cable runs. It is a good fit for:
- TV cord cleanup on smooth walls, especially when you want something that looks more finished than loose cables
- Small cable bundles where you are routing about 2 to 3 regular wires (for example, TV power plus one or two peripherals)
- DIY projects where you need flexibility, since each cover can be cut to fit your run
- Home setups with kids or pets, since the design encloses wires rather than leaving them exposed
Pros and cons in real-world use
Why it works well
- Drill-free installation: the foam tape backing is intended to make setup quick, and the kit is straightforward to align along a wall run.
- Better visual organization: reviewers repeatedly describe the “clean” look once the covers are on and the cords are tucked inside.
- Finish customization: the covers are paintable, which can help if your wall is not the standard bright white tone.
Where buyers should be cautious
- Wall surface matters: the adhesive is described as working best on flat, non-textured walls. If your wall is textured, painted unevenly, or dusty, results can vary.
- Expect a tight fit near 3 cables: the intended capacity is 2 to 3 wires, so very thick cables may reduce how comfortably they slide in.
- Painting after final placement is usually the safer move: if you plan to reopen the cover repeatedly, one review notes that paint can get scraped when the cover is opened again.
Key specs to check before you buy
- Kit contents: 5 cord cover raceways
- Size per piece: 14.2 in length x 0.94 in width x 0.47 in height (square-round profile)
- Installation type: self-adhesive (pre-applied foam tape), no drilling
- Material and color: white PVC (polyvinyl chloride), paintable
- Wire capacity intent: designed for 2 to 3 regular wires
- Cutting: can be cut to fit with scissors or a utility knife
- Indoor/outdoor use: rated for indoor and outdoor use
Installation tips that affect results
- Use smooth wall sections for best adhesion. If your wall has texture, consider testing adhesion on a small area before committing to the full run.
- Plan your alignment first. Because it is adhesive, take a moment to measure and position so the cover lines up neatly where you want it.
- Cut before final placement if needed. Measure the distance, cut the cover to length, then stick it down to reduce rework.
- Let the bond set. After pressing it in place, give the tape a little time to secure before running cables or moving the cover.
Price and availability
Pricing can change, but the kit is positioned as a budget-friendly cable raceway option, with a listing price shown below. Check the live price and quantity on the product page.
Verdict
If you want a quick, drill-free way to hide a small bundle of TV or desk cables, this cord hider kit is a practical choice. It is best for smooth, flat walls and about 2 to 3 regular wires per run. The main reason not to buy is if your wall surface is heavily textured or if you expect to frequently reopen and repaint the covers.
FAQ
How many wires can this cord hider fit?
It is designed to route about 2 to 3 regular wires. As you approach 3, the fit can feel tighter depending on cable thickness.
Does it require drilling?
No. It uses pre-applied self-adhesive foam tape, so you can peel, stick, and route the cables without drilling.
Will it stick to textured walls?
The adhesive is described as working best on flat, non-textured surfaces. On textured walls, adhesion performance can be less reliable, so test first if your surface is not smooth.
Can I cut it to a shorter length?
Yes. Each cover piece can be cut to your desired size using scissors or a utility knife.
Is it paintable?
Yes, the covers are paintable to match your wall color. If you reopen the cover after painting to re-route wires, paint may get scraped.
What kind of setups is it intended for?
It is intended for hiding cords on a wall, including wall-mounted TV setups, baby monitors, speakers, and small office cable runs.
Specifications
| Product Title | TV Cord Hider, 70.8in Cord Covers for 2-3 Wires on Wall, Paintable Cable Hider Wire Covers for Cords on Wall, Self-Adhesive Cord Hider for Wall Mount Tv to Hide Cords, W0.94 H0.47in, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Wuitaouy |
| Manufacturer | Wuitaouy |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 70.8"L x 0.94"W |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Number of Pieces | 5 |
| Unit Count | 5.9167 Feet |
| Warranty Description | No |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 70.8"L x 0.94"W |
| Installation Type | Self-Adhesive |
| Style Name | TV Cord Hider |
| Style | TV Cord Hider |
Available variants
Size
- 141.7in L x 1.18in W x 0.6in H
- 70.8in L x 0.94in W x 0.47in H
- 70.8in L x 1.18in W x 0.6in H
- 141.7in L x 0.94in W x 0.47in H
Color
- White
- Beige
- Black
Recommended next
No-Drill Under Desk Cable Management Tray (2-Pack)
This no-drill under-desk cable management tray set from COREMINDED helps hide power strips, adapters, and cables using strong 3M VHB tape (or included screws). It is a good fit for clean desk setups, especially if you need a tray size designed to accommodate MacBook charger setups, but adhesive mounting can be sensitive to surface prep and loading.
Legrand Wiremold Cable Management Kit, CordMate II, Cord Organizer and Hider, Cord Cover, Concealer, and Protector for Wall, Medium Capacity, CMK50
The Legrand Wiremold CMK50 CordMate II kit is a self-adhesive cord cover system designed to hide multiple low-voltage and AV cables along walls and around entertainment setups. Buyers like how clean the finished look is and how easy it is to cut and install, with the main tradeoff being adhesive removal risk (paint can lift) and the need to plan placement for level, secure bonding.
Delamu 236in Cord Hider, Single-Wire Cord Covers for Wires on Wall
The Delamu one-cord cable hider kit is a snap-on, paintable PVC raceway system designed to cleanly conceal a single cable run around corners. It uses strong double-sided tape (no drilling), and it’s best for slimmer, single-wire jobs like speaker wire, lamp cords, phone/fax lines, or one Ethernet cable.
Cord Cover Wall 32in, TV Cord Hider for Wall Mounted review
The ZhiYo cord cover kit is a snap-on wall wire raceway designed to hide multiple TV cables without drilling. It’s built for a clean, minimal look, uses a PVC channel rated UL94 V-0, and includes two 15.8-inch sections for about 31.5 inches total. Biggest tradeoff: adhesive-only installation can make removal hard and may mark drywall.