Cord Cover Wall 32in, TV Cord Hider for Wall Mounted review
Quick take
This ZhiYo wall cord cover kit uses a snap-on PVC raceway plus adhesive mounting to hide TV and device cables for a cleaner wall-mounted look. It’s sized for roughly 3 to 6 cables and comes as two 15.8-inch sections that connect end-to-end. The main buying caveat is that adhesive installation can be difficult to remove cleanly, especially on drywall or more delicate finishes.
Pros and cons
Pros
- Designed to conceal multiple cords (capacity stated for about 3 to 6 wires) in a wide 1.5 in channel.
- Snap-on cover makes it easy to add or remove cables after installation.
- Uses PVC with UL94 V-0 fire resistance rating, plus a design intended to resist yellowing over time.
- Two-piece kit totaling about 31.5 inches, with the option to cut to length.
Cons
- Adhesive tape is intended for smooth, clean surfaces; it is not recommended for textured walls.
- Removal may cause paint peeling or wall marks, so plan for a more permanent installation.
- Because cable fit depends on cord size, very bulky cables may not pack as densely as smaller HDMI and Ethernet lines.
What buyers think
Buyer-review evidence points to a consistent theme: the cord cover is a straightforward, fast way to make wall-mounted TV setups look cleaner. Many comments highlight an easy install process and a sleek, “blends in” appearance. Several reviews specifically note strong adhesive performance on the wall once installed, and the ability to open and close the cover to route cables. The most recurring caution is the difficulty of removing adhesive later, with some buyers warning that moving the setup or removing the raceway can damage drywall or leave marks.
What this cord hider is for
This is a wall wire raceway meant for hiding cables running from a wall-mounted TV to nearby components (streaming boxes, game consoles, routers, and more). It’s best when you want a tidy, low-visual clutter look without drilling a full length of cable channel into the wall.
Size, cable capacity, and fit
The channel is sized at 1.5 inches wide and 0.75 inches high, which is intended to fit multiple typical TV cables. The kit is positioned for scenarios involving about 3 to 6 cords. The product includes two 15.8-inch sections, for about 31.5 inches total length, and the sections are designed to connect end-to-end. You can also cut the raceway to match your exact run.
Build and design details that matter
Material and safety: The raceway is made from new PVC and includes a UL94 V-0 fire resistance rating. The white color is designed to avoid yellowing over time.
Access after installation: The cover snaps on, so you can open it to adjust cables without removing the entire raceway.
Wall appearance: It includes an arched border cover integrated with the channel, which is meant to look more like decor than exposed conduit. There are also hardly noticeable stripes on the surface, and the raceway is described as paintable to match your wall color.
Installation, adhesive mounting, and the biggest tradeoff
This kit is intended to install with double-sided PE adhesive tape (no drilling or nailing required). There’s also guidance that nails or screws may be needed for certain wall types, because the tape is not meant for textured walls, wallpaper, or delicate finishes.
Adhesion tip: Let the adhesive set, and keep the wall surface dry and dust-free before applying the raceway. The brand also recommends waiting 24 hours for better adhesion before placing cables inside.
Removal warning: Removal may cause minor paint peeling or wall marks. If you expect to move the TV soon or you rent and cannot risk wall damage, you may want to consider alternative mounting methods or a different cable management approach.
Pros and cons versus common alternatives
If you’re comparing to drill-in raceways
- Choose this adhesive kit when you want faster installation and a temporary-to-permanent setup on smooth, solid walls.
- Choose drill-in options when you need the lowest risk of paint damage on removal, or when your wall texture makes tape adhesion unreliable.
If you’re comparing to smaller cord covers
- Choose this 1.5 in wide channel if you’re managing multiple TV cables and want more space than ultra-compact raceways.
- Choose a narrower cover if your cable bundle is small, because extra width can look bulkier than necessary.
Who should buy it, and who should skip it
- Good fit for: People mounting a TV and wanting to hide several cables (around 3 to 6), on relatively smooth wall surfaces, who want a clean look and easy cable access later.
- Proceed with caution if: Your walls are textured, you have wallpaper or delicate finishes, or you anticipate moving soon and need removable solutions without wall marks.
- Not ideal if: You need a raceway that can be removed repeatedly with minimal trace, or you’re trying to conceal very thick, bulky cable bundles beyond the channel’s 1.5 in width and 0.75 in height.
Verdict
The Cord Cover Wall 32in TV Cord Hider is a practical, good-looking solution for managing multiple TV cables on smooth walls, with snap-on access for ongoing setup changes. It’s easy to install and designed to blend into a wall, but the adhesive-based mounting is the key tradeoff, since removal can leave marks or peel paint. If your setup is staying put, this style of cord cover can be a fast way to clean up a wall-mounted entertainment area.
View latest price
FAQ
How many cables can this cord cover hide?
It is intended for multi-cable setups, with a stated capacity range of roughly 3 to 6 wires. Actual fit depends on the thickness and shape of your cables.
Will the adhesive work on textured walls?
The adhesive tape is intended for smooth, clean, solid surfaces. For textured walls, wallpaper, or delicate finishes, nails or screws are recommended instead.
Can I cut it to fit a shorter TV wall section?
Yes. The raceway can be cut to match the length you need for your cable run.
Is the cover easy to open after installation?
The snap-on design is meant to let you add or remove cables without removing the entire raceway from the wall.
Will removing the cord cover damage the wall?
Removal may cause minor paint peeling or wall marks, especially if you installed it with the adhesive tape on painted drywall. Plan for a more permanent installation if wall cleanliness on removal is critical.
Specifications
| Product Title | Cord Cover Wall 32in, TV Cord Hider for Wall Mounted TV, Large Cable Hider Kit for 3-6 Cords, Wire Management Raceway, White Wire Hider Concealer, 2 x L15.8in, W1.5in H0.75in |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | ZhiYo |
| Manufacturer | ZhiYo |
| Model Number | CMR02 |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 15.8"L x 1.5"W |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Number of Pieces | 2 |
| UPC | 606267293072 |
| Unit Count | 32 Count |
| Warranty Description | 1 year |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 15.8"L x 1.5"W |
| Installation Type | Adhesive Tape/Nails |
| Style Name | Modern |
| Style | Modern |
Available variants
Size
- W1.2in x H0.7in - L63in
- W2in x H0.7in - L34in
- W1.5in x H0.75in - L31.5in
- W0.5in x H0.4in - L85in
Color
- Black
- Beige
- White
- Grey
Recommended next
No-Drill Under Desk Cable Management Tray (2-Pack)
This no-drill under-desk cable management tray set from COREMINDED helps hide power strips, adapters, and cables using strong 3M VHB tape (or included screws). It is a good fit for clean desk setups, especially if you need a tray size designed to accommodate MacBook charger setups, but adhesive mounting can be sensitive to surface prep and loading.
Legrand Wiremold Cable Management Kit, CordMate II, Cord Organizer and Hider, Cord Cover, Concealer, and Protector for Wall, Medium Capacity, CMK50
The Legrand Wiremold CMK50 CordMate II kit is a self-adhesive cord cover system designed to hide multiple low-voltage and AV cables along walls and around entertainment setups. Buyers like how clean the finished look is and how easy it is to cut and install, with the main tradeoff being adhesive removal risk (paint can lift) and the need to plan placement for level, secure bonding.
Delamu 236in Cord Hider, Single-Wire Cord Covers for Wires on Wall
The Delamu one-cord cable hider kit is a snap-on, paintable PVC raceway system designed to cleanly conceal a single cable run around corners. It uses strong double-sided tape (no drilling), and it’s best for slimmer, single-wire jobs like speaker wire, lamp cords, phone/fax lines, or one Ethernet cable.
TV Cable Hider - 62.8in PVC Cord Hider Cable Management Wall (YCLYC)
A paintable, wall-mounted PVC cord cover kit designed to hide up to about 3 to 4 cables per run. It uses double-sided adhesive for quick installs and comes as four sections totaling 62.8 inches, but adhesion is not intended for rough or textured walls and removal can damage surfaces.