NQEUEPN Silicone Desktop Mount for Osmo 3, Stable Desktop Support
Quick take
The NQEUEPN silicone desktop mount is a small tabletop stand for DJI Osmo Pocket 3, designed to keep your camera upright on a desk or table. Buyers like how compact it is and how secure it feels thanks to the non-slip silicone base. The main caveat is that the mount’s width may be too large for tight or narrow surfaces.
Pros and cons
Pros
- Non-slip silicone base helps the mount stay planted during use.
- Compact, lightweight tabletop design, easy to keep on hand.
- Stable wide-bottom shape for better everyday standing support.
- Includes a pass-through hole intended to allow charging while the camera is standing.
Cons
- Base width can be too wide for narrow shelves or tight spaces.
- It is a desktop stand, not a full tripod, so it is less flexible for changing angles and heights.
What buyers think
Buyer-review evidence is strongly positive but centered on everyday convenience and stability rather than complex performance testing. Reviewers repeatedly describe the mount as compact and easy to use, highlighting that it holds the Osmo Pocket 3 securely and gives a tidy, streamlined setup. Many comments focus on stability compared with using a “regular tripod” for standing, and several note the practical benefit of being able to charge with the camera left on the stand. A limited number of mentions point to fit limitations on narrower surfaces, suggesting the footprint matters for where you intend to place it.
Who this desktop mount is best for
This is a good fit if you want a simple way to keep your DJI Osmo Pocket 3 upright when filming short clips, doing quick check-ins, or setting up on a desk without unpacking a tripod. It is also a solid choice for creators who prefer small accessories that stay ready in a bag or on a workspace.
Key features that affect day-to-day use
Non-slip silicone and a stable base
The mount uses silicone and a larger bottom design to improve stability and reduce slipping on tables. In practice, the advantage shows up most when you place the camera on common surfaces and want it to remain upright for casual shooting or display.
Small footprint, with a width to consider
The base is about 5 cm (1.97 in) wide, with the overall dimensions listed as roughly 3.9 cm (1.54 in) by 3.4 cm (1.34 in), and the height about 2.4 cm (0.94 in). Those numbers are helpful when you are choosing where it will live, especially if you use narrow shelves or tight workspaces.
Designed for tabletop use, including while charging
Buyers call out the presence of a hole that allows charging while the camera is in the mount. If you plan to keep the Osmo Pocket 3 ready for quick shoots, this can reduce the friction of removing the device each time you power it.
Pros and cons, in plain terms
Pros
- Quick setup for desk or tabletop standing, without the bulk of a tripod.
- Non-slip silicone helps keep the camera stable during use.
- Charging-through design is convenient for ongoing sessions.
- Compact build makes it easy to carry and store.
Cons
- Less suitable for narrow shelves due to the mount’s footprint.
- Limited to standing, so you will not get the same positioning flexibility as a tripod or adjustable mount.
Is it worth it?
If you mainly need a stable, non-slip way to stand your DJI Osmo Pocket 3 on a desk, this is a budget-friendly accessory category match. It is lightweight, compact, and built around practical tabletop use, with charging pass-through noted as a real convenience. If your setup requires a narrow ledge or you need angle and height adjustments, you may be better served by an adjustable camera mount or tripod-style solution instead.
Price and availability
Current pricing and availability can change, but this mount is positioned as an inexpensive add-on compared with tripod systems. Check the latest listing for the most up-to-date price.
FAQ
Note: Answers reflect the product’s listed purpose and the buying information included in the review themes.
Does this mount work with DJI Osmo Pocket 3?
Yes, it is intended as a desktop/tabletop support for DJI Osmo Pocket 3.
Is the mount non-slip?
It uses silicone with a non-slip design, and buyers specifically mention that it helps keep the camera securely in place.
What are the approximate dimensions?
The base width is about 5 cm (1.97 in), height is about 2.4 cm (0.94 in), and other listed widths are approximately 3.9 cm (1.54 in) and 3.4 cm (1.34 in).
Can I charge the camera while it is on the stand?
There is a hole intended for charging while the camera is left standing in the mount, and reviewers call this out as useful.
Will it fit on narrow shelves?
It may be too wide for very narrow shelves. If space is tight, measure the footprint against your available surface before buying.
Is this a good replacement for a tripod?
It is better described as a tabletop stand, not a tripod. It is great for upright desk setups, but it provides less flexibility for changing angles and heights.
Specifications
| Product Title | NQEUEPN Silicone Desktop Mount for Osmo 3, Stable Desktop Support Bracket for Camera Compact Portable Base Support Stand Accessories for DJI Osmo Pocket 3 (Black) |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Tripod & Monopod Accessories > Camera Mounts & Clamps |
| Brand | NQEUEPN |
| Manufacturer | NQEUEPN |
| Model Name | 10117 |
| Model Number | 10117 |
| Color | black |
| Item Weight | 0.02 Kilograms |
| Compatible Devices | DJI Osmo Pocket 3 |
| Compatible Phone Models | DJI Osmo Pocket 3 |
| Mounting Type | Tabletop Mount |
| Additional Features | Non-Slip |
| Water Resistance Level | Not Water Resistant |
| Shape | rectangular prism |
| Mfr Part Number | 1001255 |
| Enclosure Material | Silicone |
Available variants
Size
- large size
- small size
Recommended next
X5 Magnetic Quick Release Base for Insta360 X5, Aluminum Alloy mount
A compact, aluminum magnetic quick-release base designed for Insta360 X5 and compatible Ace Pro cameras. It prioritizes fast mount changes with a 1/4-inch threaded hole plus a foldable action-cam adapter, but buyers should verify a secure fit before any use, especially where bumps or heavy vibration are likely.
NEEWER Silicone Stand Base for Pocket 4 & 3, ø64mm
A small, silicone desktop base designed for DJI Osmo Pocket 4 and Pocket 3 to help you shoot stable, hands-free video and protect your desk. It’s geared for quick tabletop setups, with a key tradeoff that it may affect compatibility with some creator-combo accessories.
PGYTECH Arca-Type Quick Release Camera Plate Parts Replacement Switch Between
The PGYTECH Arca-Type Quick Release camera plate is a compact Arca-Swiss compatible plate for cameras with a 1/4-inch screw hole. It’s designed to swap camera orientation and mount across different Arca heads and accessories, with a tight-fitting screw and a rubber anti-slip pad for security. The main tradeoff: the surface coating may scratch easily, and it’s not a full quick-release system by itself, so you still need compatible Arca clamps/heads.
HSU Aluminum 1/4 inch 20 Camera Mount, 360 Degree Rotation Tripod Adapter
The HSU aluminum 1/4-20 to GoPro-style adapter adds a 360-degree swivel to help action cameras mount to standard tripod accessories. It’s a good fit for GoPro Hero users and other action cams that support 1/4-20 accessories, with solid all-metal build as a common theme. The main tradeoff is that you may need to follow the orientation instructions carefully, and the finish may show wear where the swivel moves.