HSU Aluminum 1/4 inch 20 Camera Mount, 360 Degree Rotation Tripod Adapter
Quick take
This aluminum 1/4-20 to GoPro-style adapter lets you connect compatible action cameras to standard tripod and accessory setups, adding a 360-degree swivel for flexible angles. Buyers who use it with GoPro and similar action cams often highlight the all-metal build and how useful the rotation detents are for everyday framing. The main caveat is making sure you have the right thread and interface, and the swivel area may show finish wear over time.
Pros and cons
Pros
- All-aluminum construction aimed at solid durability, not mixed plastic parts.
- Standard 1/4-20 threading, designed to mate with common tripod and accessory hardware.
- 360-degree rotation with detents, which helps hold intermediate angles.
- Small and lightweight adapter (about 1.6 oz), easy to carry and swap in setups.
Cons
- Getting the rotation piece oriented correctly may take a moment for first-time use.
- Finish wear and flaking at the moving/swivel contact areas has been reported.
- Compatibility depends on your camera mount interface after connection, so double-check your camera’s accessory system.
What buyers think
Buyer feedback is relatively consistent around a few practical points. Many users say it performs as expected when mounting a GoPro-style action camera to standard tripod gear, and they call out the build quality as “solid” and “all metal.” Several reviewers mention the 360-degree swivel is genuinely useful, especially because it rotates in a controlled way rather than feeling completely free-spinning. Setup is generally described as straightforward, though a few buyers note it can take a short learning moment to use the rotation feature correctly. The most recurring downside theme is not mechanical failure, but cosmetic wear, with one review specifically calling out paint flaking in areas that move during rotation.
Who this adapter is for
The HSU 1/4-20 camera mount is designed for action-camera shooters who want one small adapter to bridge two common worlds: standard tripod/accessory hardware (1/4-20 thread) and GoPro-style mounting interfaces. If you already own mounts, small tripod heads, or other 1/4-20 accessories and want your action camera to fit them, this type of adapter can be the simplest way to make the ecosystem work together.
Compatibility and how it connects
This adapter uses a standard 1/4-inch 20 thread and is meant to connect to a GoPro-style camera mount interface. It is marketed as compatible with a wide range of action cameras and accessories, including GoPro Hero models (with broad coverage across generations listed by the manufacturer), plus several other action-camera lines that can work with a GoPro-like connection once the parts are matched together. It is also described as requiring a short step before rotation, where you lift and rotate in a clockwise direction (after assembling the connected parts) to get the swivel moving as intended.
Pros and tradeoffs for real-world use
Rotation control without guesswork
The 360-degree swivel is a key reason to buy this adapter. Buyers highlight detents at regular intervals, which can make it easier to land on practical framing angles (for example, horizon leveling or a repeated camera position for different shots) without constantly adjusting by eye.
Durability for travel and frequent swaps
Because it’s aluminum and described by buyers as solid and metal-built, it’s aimed at owners who swap gear often, carry mounts in bags, or set up in the field where lightweight hardware matters. At about 1.6 ounces, it’s also not intended to add meaningful bulk to a kit.
What to watch for: finish wear
If you use the swivel feature repeatedly, expect normal cosmetic wear at the moving areas. That doesn’t necessarily imply performance problems, but it’s worth considering if you care about a pristine finish on accessories.
Price and availability
Check current pricing and stock status before you buy, since adapter pricing can move. If you’re looking specifically for a 1/4-20 to GoPro-style swivel adapter, this is the category of item that’s usually easy to compare by thread type, rotation behavior, and build material.
Verdict
The HSU aluminum 1/4-20 camera mount is a practical add-on if you need your action camera to work with standard tripod and accessory threads, while also gaining controlled 360-degree rotation for better framing. Buyers tend to like its solid all-metal feel and the usefulness of detents for repeatable angles. Just make sure your camera and mount interface are actually compatible, and be aware that cosmetic finish wear can show up around the swiveling areas with continued use.
FAQ
Will this work with my GoPro Hero camera?
It’s designed to connect to GoPro Hero-style mounting, using a 1/4-20 threaded interface. If your GoPro mounting system is the GoPro-style interface this adapter is made to mate with, it should fit your setup.
What does the 1/4-20 thread mean?
1/4-20 is a common tripod accessory thread size. If your existing tripod head, clamp, or mount uses a standard 1/4-inch 20-thread screw, you can typically attach this adapter directly.
Is the swivel easy to use?
Most buyers describe it as working well once assembled, but a few note it can take a minute to understand the rotation step. Following the orientation instructions (including the lift and clockwise rotation step) helps.
Does the adapter have any downsides?
The most notable downside reported by buyers is cosmetic finish wear where parts move during rotation, such as paint flaking in motion areas. It’s also important to confirm compatibility with your specific camera and mount interface.
Is this adapter lightweight enough for travel?
It’s listed as about 1.6 ounces, which makes it convenient to keep in a small kit or swap between different mounts without adding much weight.
Specifications
| Product Title | HSU Aluminum 1/4 inch 20 Camera Mount, 360 Degree Rotation Tripod Adapter Fits GoPro Hero, DJI Osmo Action Camera Insta360 Ace Pro AKASO Campark and Other Standard 1/4 Accessories |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Tripod & Monopod Accessories > Camera Mounts & Clamps |
| Brand | HSU |
| Manufacturer | HSUTECH |
| Model Number | HGP230BK |
| Color | 360 Degree 1/4 inch 20 Camera Mount |
| Material | Aluminum |
| Item Weight | 1.6 Ounces |
| Brand Name | HSU |
| UPC | 612953826219 612953826172 |
| Manufacturer Part Number | HGP230BK |
| Manufacturer Warranty Description | 1 year manufacturer warranty |
| Item Dimensions | 1.85 x 0.98 x 0.98 inches |
| Material Type | Aluminum |
| Mounting Type | Handlebar Mount |
| Item dimensions L x W x H | 1.85 x 0.98 x 0.98 inches |
Recommended next
X5 Magnetic Quick Release Base for Insta360 X5, Aluminum Alloy mount
A compact, aluminum magnetic quick-release base designed for Insta360 X5 and compatible Ace Pro cameras. It prioritizes fast mount changes with a 1/4-inch threaded hole plus a foldable action-cam adapter, but buyers should verify a secure fit before any use, especially where bumps or heavy vibration are likely.
NQEUEPN Silicone Desktop Mount for Osmo 3, Stable Desktop Support
This compact silicone tabletop mount is made for DJI Osmo Pocket 3, giving you a stable, non-slip way to stand your camera on a desk or tabletop. It is lightweight, small, and designed for everyday use without a full tripod, with the main tradeoff being limited fit on very narrow shelves due to its base width.
NEEWER Silicone Stand Base for Pocket 4 & 3, ø64mm
A small, silicone desktop base designed for DJI Osmo Pocket 4 and Pocket 3 to help you shoot stable, hands-free video and protect your desk. It’s geared for quick tabletop setups, with a key tradeoff that it may affect compatibility with some creator-combo accessories.
PGYTECH Arca-Type Quick Release Camera Plate Parts Replacement Switch Between
The PGYTECH Arca-Type Quick Release camera plate is a compact Arca-Swiss compatible plate for cameras with a 1/4-inch screw hole. It’s designed to swap camera orientation and mount across different Arca heads and accessories, with a tight-fitting screw and a rubber anti-slip pad for security. The main tradeoff: the surface coating may scratch easily, and it’s not a full quick-release system by itself, so you still need compatible Arca clamps/heads.