Legrand Wiremold C110S Cordmate 108 Inch 17 Piece Cord Cover Kit, White
Quick take
The Legrand Wiremold C110S Cordmate is a self-adhesive wall and baseboard cord cover kit that helps conceal and organize a single cord or cable run. It includes multiple straight sections and corner pieces, plus a channel that can be cut for a custom fit. The main buying caveat is installation placement, because the adhesive is described as very strong and can pull paint if you reposition after sticking.
Pros and cons
Pros
- Self-adhesive installation, designed to be quick once positioned correctly.
- Comes as a kit with straight channel sections and multiple fittings (couplings plus inside and outside elbows).
- Channel can be cut to length for custom routing along walls or baseboards.
- Many buyers used it to hide common home entertainment and office cable runs.
Cons
- Strong adhesive means you need accurate placement, since repositioning can damage paint.
- Thicker or stiff cables may require more effort to “zipper” into the channel, and routing may be less flexible.
- Adhesive performance may vary on certain surfaces, and some setups benefited from extra anchoring or tape.
What buyers think
Buyer review evidence points to a consistent theme: the system is effective at making messy cords look neat, and it stays hidden once installed. Several reviewers specifically highlight how well the adhesive works when the channel is pressed down in the right spot, and they report good overall results in real home cable management jobs such as hiding fixture cords and securing TV or speaker-type wiring along baseboards.
At the same time, the same adhesive strength is also the biggest practical drawback. Reviewers warn that if you need to lift and reposition, it can pull paint off the wall or surface. There is also mention that the channel’s opening is stiff, so inserting thicker cables can be tricky and may require planning how the cord exits the outlet (for example, avoiding tight bends right at the faceplate). Finally, a small number of reports suggest that on some surfaces, additional hardware or tape helped keep the track secure.
Who this cord cover kit is for
- Home entertainment and office cable tidying: A good fit for hiding TV/video cabling, speaker cables, and general home office wiring along walls or baseboards.
- People who want a custom-shaped run: The channel can be cut with a utility knife or fine-tooth saw, so you can match your length.
- Buyers comfortable with careful placement: If you can measure and align before pressing, the strong adhesive approach tends to work well.
Key features that matter during shopping
Kit size and included fittings
This kit is intended for longer, multi-piece runs. It includes over 9 feet of wire channel in 7 sections (each about 16 inches long), plus couplings (to connect sections) and corner pieces including one inside elbow and one outside elbow, which helps when you need a turn without building everything from scratch.
Installation style
The CordMate uses pre-attached adhesive backing for installation. That makes it straightforward on suitable surfaces, but it also means your alignment needs to be right the first time. If you’re working with fresh paint or delicate finishes, plan your layout carefully before pressing the channel in place.
Cable capacity and fit
The system is designed to hold a single cord or cable and is commonly described as suitable for typical home wiring runs. That said, reviews indicate the channel’s opening can feel stiff, so inserting larger, thicker, or less flexible cables may require extra patience. If your cord is close to the upper end of what fits, consider routing it into the channel before fully mounting the track when possible.
Pros and cons in real-world use
Pros
- Tidy, hidden cord runs: Multiple buyers used the kit to make cords disappear along baseboards and walls.
- Strong adhesive when placed correctly: Reviewers frequently describe it as very sticky and effective.
- Customizable length: Cutting the channel to match your space helps avoid awkward gaps.
- Fittings reduce DIY complexity: Inside and outside elbow pieces support typical room layouts.
Cons
- Repositioning can be a problem: If you press it down and realize it’s off, you risk pulling paint or damaging the surface.
- Cable routing can be harder with thicker cords: Stiff channels and less flexible cables can make insertion and exit-bend planning more challenging.
- Some installs may need reinforcement: If the surface isn’t ideal for adhesive, extra tape or clamps can help keep it secure.
How to choose the right cable raceway for your setup
- Measure the run length and plan turns. This kit provides multiple channel sections and elbows, but you still want to confirm the total distance and where corners are needed.
- Check your cable size and flexibility. If your cable is bulky, plan how it will slide into the channel and how it will exit near outlets.
- Consider wall surface type. The adhesive approach works best on surfaces that can tolerate strong sticking without paint damage. If you have textured walls or uneven surfaces, you may need additional anchoring.
- Dry-fit your layout. Align the track, confirm direction and outlet clearance, then press down firmly once you are sure.
Verdict
The Legrand Wiremold C110S Cordmate kit is a practical choice for shoppers who want a clean, concealed single-cable run along walls or baseboards, especially for entertainment and office setups. It earns praise for how well it hides cables and how strong the adhesive can be. Just be prepared for careful placement and know that thicker, stiffer cables or challenging surfaces may take extra effort, sometimes beyond adhesive alone.
FAQ
- How long is the Legrand Wiremold C110S Cordmate kit? It includes over 9 feet of wire channel made up of 7 sections, with each section about 16 inches long.
- Is this cord cover kit self-adhesive? Yes, it has pre-attached adhesive backing intended to simplify installation.
- Can I cut the cord cover to fit? Yes. The channel can be cut to length with a utility knife or a fine-tooth saw.
- Will it fit thicker cables? It’s designed to hold one cord or cable, but reviewers note that thicker, less flexible cables may require extra effort to insert into the channel and may need careful routing near the outlet.
- What’s the main downside buyers mention? The adhesive is described as very strong, so you should place the channel exactly where you want it, since repositioning can pull paint off.
Specifications
| Product Title | Legrand Wiremold C110S Cordmate 108 Inch 17 Piece Cord Cover Kit, Organizer for Wall, Holds 1 Cord or Cable, Sustainable Packaging, White (1 Pack) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Wiremold |
| Manufacturer | Legrand Wiremold |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 16"L x 0.52"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 17 |
| UPC | 086698002960 |
| Unit Count | 1.0 Count |
| Warranty Description | 1 year manufacturer |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 16"L x 0.52"W |
| Installation Type | Self-Adhesive |
| Style Name | C110 Sortable - 108 Inches |
| Style | C110 Sortable - 108 Inches |
Available variants
Style
- C210 Sortable - 144 Inches
- C110 Sortable - 108 Inches
- C210SBK Sortable - 128 Inches Black
Recommended next
No-Drill Under Desk Cable Management Tray (2-Pack)
This no-drill under-desk cable management tray set from COREMINDED helps hide power strips, adapters, and cables using strong 3M VHB tape (or included screws). It is a good fit for clean desk setups, especially if you need a tray size designed to accommodate MacBook charger setups, but adhesive mounting can be sensitive to surface prep and loading.
ZhiYo Cord Hider for One Wire, 102in Cable Hider Concealer, Paintable Wall Wire Covers (Black)
The ZhiYo Cord Hider kit is a compact PVC cable raceway designed to conceal one main cord along baseboards, walls, or corners using paintable covers and double-sided adhesive. It can be easy to install and blend in when painted, but adhesive performance and backing-paper removal can affect how smooth your setup feels.
Delamu Cord Hider, 100in Self-Adhesive Cord Cover Kit for Wall review
The Delamu CC11 cord hider kit is a paintable, self-adhesive cable raceway designed to conceal 2 to 3 standard cords for wall-mounted TVs and electronics. It installs without drilling, but the adhesive is strong, so planning and precise placement matter.
Delamu 2 Pack Metal Under Desk Cable Management Tray, U Channel Cord Organizer Box
The Delamu 2 Pack under-desk cable trays are a metal U-channel option for tidying power bricks and desk clutter. They come with both tape and screw mounting, plus ties and cord holders, but tape performance depends heavily on surface prep and curing time.