CCCEI Heavy Duty Surge Protector Power Strip 20 Amp Individual Switches (6FT 12 Gauge)
Quick take
CCCEI’s heavy duty power strip combines a 6-foot, 12-gauge cord with four wide-spaced outlets and independent 20-amp circuit breakers, each controlled by its own switch. It is a strong fit for garages, shops, and multi-charger setups where you want per-device control. The key limitation is staying within the rated maximum load (do not exceed 1875W), and remembering it is not meant for wet or unprotected outdoor use.
Pros and cons
Pros
- Four outlets with individual on/off switches (per-device control).
- Heavy-duty 12-gauge, 6-foot extension cord for higher-demand spaces.
- Independent 20-amp circuit breakers and grounded surge protection with a 4800J rating.
- Wall-mountable metal housing with wide spacing between outlets.
Cons
- Load limits matter, with guidance not to exceed 1875W.
- Individually switched design can be awkward for bulky chargers if plugs sit close to the switch area.
- Not intended as an all-weather outdoor strip, it should be protected if used outdoors.
What buyers think
Buyer-review evidence points to a consistent theme of solid build and “workshop ready” usefulness. Shoppers frequently mention the strip feels heavy duty, with wide, well-spaced outlets that make it easier to plug in chargers and power tools without crowding. Individual switches and independent protection are also called out as helpful for controlling multiple devices (like battery chargers) without unplugging. Setup flexibility shows up as well, with buyers using the unit in places like garages and even mounting or hanging it to keep cords organized. One recurring caution is that the switch area may be sensitive to plug position on certain charger bricks, so you may need to adjust how fully the plug sits.
Who this power strip is best for
- Workshop and garage users who want stronger cord capacity than typical “thin” extension cords.
- People charging multiple devices (for example, tool battery chargers, small appliances, or electronics) who prefer turning each outlet on or off independently.
- Buyers who value surge protection and grounded design, especially when powering frequent everyday devices.
- Those who want a wall-mount option to reduce desk clutter and keep cords routed more cleanly.
Key features that matter in real use
Independent 20-amp control per outlet
Each of the four outlets is designed around its own 20-amp circuit breaker, and each outlet has an individual switch. In practice, this setup is meant to make it easier to manage different devices at the same time, without having everything tied to a single shared control.
Surge protection rated at 4800J
The unit includes surge protection with an advertised 4800 joule rating, along with overload and other protective functions. If your routine involves plugging in and out, or running sensitive electronics alongside garage equipment, surge protection is a meaningful upgrade compared to basic extension cords.
12-gauge, 6-foot cord for higher-demand setups
The included 6-foot 12-gauge heavy duty extension cord is intended to better match higher power use (with guidance not to exceed the stated maximum power). The wide-spaced outlet layout also helps when you need room for larger adapters.
Wall-mountable metal housing
A metal, thickened casing supports a wall screw mount design, making it easier to keep things organized in a garage, shop, or utility area. If you frequently move equipment or deal with lots of cords, mounting can reduce strain on plugs and connectors.
Pros and cons in plain terms
Pros
- Per-outlet control: individual switches make it easier to manage multiple devices without unplugging.
- Better fit for tool/charger setups: wide spacing helps accommodate larger plugs.
- Protection and safety focus: surge protection plus independent circuit breaking.
- Durable design: buyers repeatedly describe the strip and cord as heavy duty.
Cons
- You must respect the watt limit: guidance not to exceed 1875W means this is not for stacking high-watt loads.
- Outdoor use needs caution: it should be protected if used outside.
Price and availability
Pricing and stock status can change, so it is worth checking the latest listing details. If you are comparing value, focus on whether you specifically need the combination of individual switches, wide-spaced outlets, and independent circuit breaking, since those features are what justify “heavy duty” strip pricing.
Is it worth it?
The CCCEI heavy duty surge protector power strip is worth considering if your use case matches its strengths: garage and workshop power management, multiple devices that benefit from per-outlet switching, and a desire for grounded surge protection. It is less ideal if you mainly need a simple, low-load indoor extension strip, or if your priority is maximum flexibility for very bulky plug geometries without any need to adjust how chargers sit.
FAQ
What is the maximum load for the CCCEI power strip?
It is advised not to exceed 1875W. The unit is rated for 20 amps, so make sure your total plugged-in load stays within the stated limit.
Does this power strip have individual switches?
Yes. Each of the four outlets has its own on/off switch and its own independent 20-amp circuit breaker behavior.
How long is the extension cord?
The cord length is 6 feet.
How much surge protection does it provide?
Surge protection is rated at 4800 joules, and the unit also includes overload protection and grounded protection features.
Can I use it outdoors?
It is intended for indoor use, and it should be protected if used outdoors. Avoid exposure to moisture.
Is it wall mountable?
Yes. It is designed for wall screw mounting with a metal housing.
Will it work for large charging bricks and power adapters?
The outlets are wide spaced, which helps. However, the individual switch area can be sensitive to plug position on certain chargers, so you may need to ensure the plug sits correctly for reliable switching.
Specifications
| Product Title | CCCEI Heavy Duty Surge Protector Power Strip 20 Amp Individual Switches. 6FT 12 Gauge Extension Cord with Multiple Outlets. Kitchen, Garage, Shop, Industrial Wall Mount Electric Extender, Yellow. |
|---|---|
| Category | Electronics > Accessories & Supplies > Power Strips & Surge Protectors > Power Strips |
| Brand | CCCEI |
| Manufacturer | CCCEI |
| Model Number | AN-B44-20 |
| Color | Yellow |
| Number of Outlets | 4 |
| Voltage | 125 Volts |
| Other Special Features of the Product | Mountable, On And Off Switch, Surge Protection, Wide Spaced Outlet |
| Maximum Current | 20 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Surge Protection Rating | 4800 Joules |
| Plug Type | Type B |
| Number of Ports | 4 |
| Compatible Devices | Hair Dryer, Set Top Box, Noise Maker, Freezer, Fax Machine, Modem, Iron, Tablet, Cellular Phone, Mixer Grinder, Microwave Oven, Gaming Console, Refrigerator, Smartwatch, Laptop, Projector, Radio, Air Conditioner, Television, Printer, Electric Fountain, Rice Cooker, Toaster, Lamp, DVD Player, MP3 Player, Home Theater, Light, E-Reader, Personal Computer, Smartphone, Router, Scanner, Speaker, Camera, Water Boiler, Monitor, Coffee Machine, Audio Sound System, Fan, Heater, Juicer |
| Smart Home Compatibility | Not Smart Home Compatible |
| Amperage | 20 Amps |
| Unit Count | 1.0 Count |
| Enclosure Material | Acrylonitrile Butadiene Styrene, Aluminum, Copper |
| Total Power Outlets | 4 |
| Special Feature | Mountable, On And Off Switch, Surge Protection, Wide Spaced Outlet |
Available variants
Color
- Black
- Cosmic Orange
- Grey
- Yellow
Size
- 6ft
- 12ft
- 10ft
- 15ft
- 4ft
- 20ft
- 25ft
Recommended next
2 Pack Power Strip Surge Protector (Addtam)
The Addtam 2 Pack Power Strip Surge Protector is a practical power + charging solution for desks, home offices, and dorm setups, with five widely spaced AC outlets and three USB ports (including USB-C). It also includes a 1080-joule surge protection system and an overload shutoff feature, plus a flat plug and wall-mount holes to keep cables tidy.
Anker Outlet Extender, Power Strip with 300J Surge Protector, 10-in-1 with 6 AC, 2 USB A, 2 USB C Ports
Anker’s 10-in-1 outlet extender combines 6 wide-spaced AC outlets with 4 USB ports (2 USB-C, 2 USB-A) and 300J surge protection in an ultra-thin, low-profile design. It is a strong option for dorm rooms, nightstands, and home office desks where you need more usable plug space and cleaner cable management, with one key caveat: the USB power sharing and laptop compatibility limitations mean it may not suit everyone’s devices.
Addtam USB Wall Charger Surge Protector (5 AC outlets, 4 USB, 1800J)
The Addtam USB wall charger surge protector is a flat, wall-mountable outlet extender that combines five widely spaced AC sockets with four USB charging ports (including USB-C) and an 1800J surge protection circuit set. It is a strong fit for kitchens, home offices, and nightstands where you need more plug space and faster charging in a single wall unit, with the main caveats being outlet plug compatibility on some designs and a shared USB current limit.
Addtam Surge Protector Power Strip (Flat Plug, 6 AC + 4 USB, 900J)
The Addtam flat plug surge protector power strip is built for busy desks, dorms, and home offices, combining 6 AC outlets with 4 USB ports (including 2 USB-C). It also includes 900J surge protection and multiple safety protections, but its flat design and 5 ft cord are best suited to compact setups rather than heavy cable runs.