4CPW5A60W 4 Channel 5A 12Vdc CCTV Power
Quick take
The 4CPW5A60W is a four-channel 12V DC CCTV power distribution unit meant to run multiple cameras from a single power source. It supports universal 100 to 240VAC input, delivers up to 60W total output (5A per channel), and includes adjustable output voltage plus output protection. The main caveat is reliability, since feedback is mixed, including reports of early failure in some setups.
Pros and cons
Pros
- 4-channel 12V DC distribution (5A per output, up to 60W total) for powering multiple cameras.
- Adjustable output voltage to help with longer-distance transmission.
- Universal 100 to 240VAC input, so it fits common US/region power environments.
- Output protection using Class 2 PTC protection.
Cons
- Buyer-review evidence is mixed on long-term reliability, with multiple reports of unit failure.
- Connector compatibility matters: uses a 2.1mm DC barrel jack or a terminal block, so plan wiring accordingly.
What buyers think
Buyer-review evidence is limited (17 total ratings) and the sentiment is split. Some buyers describe the unit as working well for replacement use and lasting for years in an operating security setup. Other reviews report failures after roughly a couple of years or, in at least one case, within a few months. Overall, the available feedback suggests you should treat it as a budget-friendly distribution solution, but not assume consistent long-term performance for every installation.
What this power unit is for
This model is built to distribute constant 12V DC power to a CCTV camera system across four channels. It is intended for installers or homeowners who want one centralized 12V DC source rather than running separate adapters to individual cameras.
Key specs that affect real-world use
Power capacity and channel output
With 5A per channel and a 60W maximum total output, this unit is a good fit for small to mid-size camera deployments where each camera does not exceed the channel’s current limits. If you are combining cameras and accessories, calculate total current draw carefully to avoid overloading.
Input and compatibility with typical installs
It accepts 100 to 240VAC input, which is helpful if you want one power supply design across different electrical environments. For connections, the unit uses either a 2.1mm DC barrel jack or a terminal block, so make sure your camera cabling and splices match your planned connection method.
Adjustable output voltage for voltage drop
Adjustable output voltage is the feature that most often matters for longer cable runs. If cameras are installed at the far end of longer coax or DC runs, fine-tuning the output can help maintain camera performance compared with fixed-output adapters.
Protection approach
The unit includes Class 2 PTC output protection. In practice, that means it is designed to handle output faults in a protective way rather than operating as a bare transformer. This is a meaningful consideration for CCTV, where a short or wiring error can happen during maintenance.
Pros and cons (expanded)
Pros you’re likely to appreciate
- Centralized, multi-channel powering: four 12V DC outputs reduce the need for multiple adapters.
- Built for camera installs: constant 12V DC distribution, with adjustable voltage for distance-related issues.
- Universal AC input: supports 100 to 240VAC.
- Protection included: PTC-based output protection adds a layer of safety.
Cons and buyer-fit concerns
- Reliability reports are mixed: some users report multi-year use, while others report early failure. If your security setup is time-sensitive, consider factoring in redundancy or planning a backup power strategy.
- Connection planning matters: you need to be comfortable using a 2.1mm DC barrel jack or terminal block wiring for your camera cabling.
Who should buy it
Consider the 4CPW5A60W if you want a single 12V DC CCTV distribution unit for up to four cameras, you can wire using the provided connector options, and you value adjustable output voltage for longer runs.
Who should skip it
Skip this unit if your priority is maximum reliability above all else and you are not able to accommodate the possibility of early failure based on the mixed review evidence. Also skip if you cannot match the 2.1mm DC barrel jack or terminal block connection approach to your existing wiring plan.
How it compares on the features that matter
Without naming specific models, here is how this power distribution unit stacks up by decision criteria:
- 4-channel vs. single-output: If you have multiple cameras, a multi-channel distribution unit can reduce clutter and simplify power changes.
- Adjustable output: This is a stronger option than fixed-output adapters when you have voltage drop concerns on longer cable runs.
- Protection: Output protection is a must-have in CCTV builds, especially during installs or troubleshooting.
- Reliability tradeoff: Mixed reviews mean you should weigh the convenience and features against the potential need for backup planning.
Verdict
The 4CPW5A60W is a practical, feature-focused four-channel 12V DC CCTV power distribution unit, particularly if you want adjustable output voltage for distance and you prefer one centralized power supply. The biggest buying caveat is reliability, since reviewer reports are inconsistent. If you’re installing a small camera system and can plan for troubleshooting or redundancy, it can be a reasonable option to power up to four cameras, but it is not the kind of product you should treat as guaranteed “set it and forget it.”
View latest price
FAQs
- Is the 4CPW5A60W a 12V DC power supply for CCTV cameras?Yes. It provides constant 12V DC output for CCTV camera power distribution across four channels.
- How much total power can the 4CPW5A60W deliver?It is rated for up to 60W maximum total output, with 5A per channel.
- Does this unit support universal input voltage?Yes. It uses a 100 to 240VAC universal input range.
- What connectors does the 4CPW5A60W use?It supports a 2.1mm DC barrel jack connection type or a terminal block connection method.
- Why is the adjustable output voltage feature useful?Adjustable output voltage can help compensate for voltage drop when cameras are installed farther away on longer runs.
- Is the 4CPW5A60W reliable?The available buyer-review evidence is mixed. Some users report multi-year operation, while others report early failure, so it’s wise to consider backup planning for security-critical setups.
Specifications
| Product Title | 4CPW5A60W 4 Channel 5A 12Vdc CCTV Power |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | W Box Technologies |
| Manufacturer | W Box Technologies |
| Model Number | 4CPW5A60W |
| Item Weight | 0.83 Pounds |
| Compatible Devices | Camera |
| Connector Type Used on Cable | 2.1mm DC barrel jack or Terminal block |
| Output Wattage | 60 |
| Form Factor | Custom/Proprietary |
| Wattage | 60 |
| Cooling Method | Air |
| Current Rating | 5 Amps |
| Maximum Input Voltage | 240 Volts (AC) |
| Minimum Input Voltage | 12 Volts |
| UPC | 811914021940 |
| Mfr Part Number | 4CPW5A60W |
| Warranty Description | 24-Month Warranty |
| Connector Type | 2.1mm DC barrel jack or Terminal block |
Recommended next
Tripp Lite PDU Switched 1.4kW 16 5-15R 120V 15A LX Platform Interface 5-15P Vertical (PDUMV15NETLX)
A vertical, rack-mount switched PDU designed for network and IT environments that need per-outlet control plus remote monitoring. The LX Platform interface supports secure web access and multiple network protocols, but buyer-review evidence is limited (only two ratings), so fit depends heavily on your monitoring and rack orientation needs.
StarTech.com 1U 19 inch 8 Port Rack Mount PDU (PDU08C13H)
A 1U, horizontal rack-mount PDU with eight IEC C13 outlets and built-in circuit protection, designed to tidy installs in standard 19-inch server racks. Best for setups that need organized power distribution, but buyers should plan carefully around input connection fit and total load to avoid nuisance breaker trips.
Tripp Lite Metered PDU, 30A, 30 Outlets (6-C19 & 24-C13), 208/240V, L6-30P, 10 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV30HV)
A 0U vertical, metered PDU built for rack environments that need current monitoring and load separation. With 30 outlets (6 C19, 24 C13) split into two separately metered, breaker-protected load banks, it’s a strong fit for data centers or other 208/240V setups that want visibility into amps before you hit capacity.
Yuarise 9 Channel/Port DC 12V 10 Amp Security Camera Power Supply Distribution (Metal Box, 9 Outputs)
A compact 9-output DC 12V power distribution box for CCTV, IP cameras, and DVR setups that want per-channel protection. It offers a total 10A max (up to 1A per channel) with independent fuses and LED indicators, but you need to confirm your cameras’ current draw so the total load fits within spec.