Tripp Lite Metered PDU, 30A, 30 Outlets (6-C19 & 24-C13), 208/240V, L6-30P, 10 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV30HV)
Quick take
This Tripp Lite metered 0U vertical rack PDU is designed for 208/240V environments where you want continuous current monitoring and two separate, breaker-protected load banks. It offers 30 outlets total (6 C19 and 24 C13) and built-in meters that show amps by load bank, making it easier to manage power headroom. The main caveat is compatibility: the input plug and outlet types are intended for server-room style setups, not typical residential wiring.
Pros and cons
Pros
- Built-in current monitoring with two separate 2-character LED displays (one per load bank), shown in 1-amp increments
- 30 total outlets designed for mixed gear (6 C19 plus 24 C13)
- Two separately breakered 15A load banks for better load separation
- 0U vertical rack-mount form factor with included mounting hardware
Cons
- Not a universal fit, because it uses an L6-30P style input and targets 208/240V power environments
- Space tradeoff for some racks, since it’s a tall vertical unit rather than a compact horizontal strip
What buyers think
Buyer-review evidence highlights a few recurring decision factors. Many reviewers focus on the usefulness of the built-in amp readings, especially the value of having separate meter information for each load bank. Reviewers also commonly describe the outlet mix and rack fit as practical for server and higher-density deployments, and they mention that it installs cleanly in compatible rack solutions. Where limitations show up, they are usually about setup and compatibility, such as input plug expectations and the fact that this kind of PDU is meant for industrial or server-room electrical standards rather than typical home outlets. Overall, the feedback pattern suggests the metering and rack-friendly design are the main drivers.
Key features that matter for rack power management
Metered monitoring for each load bank
This PDU includes two built-in, easy-to-read LED displays that report output current (amps) in one-amp increments. Instead of one combined number, it reports each side separately, which can make day-to-day load balancing easier when your rack or enclosure includes mixed equipment or redundant power paths.
30 outlets with mixed C19/C13 support
With 30 outlets total, the layout supports 6 C19 and 24 C13 connections. That mix is useful when you have a blend of power-hungry devices (often paired with C19) and typical server or networking gear (often C13). If your equipment power cords match these plug types, you can reduce the need for adapters and manage cable planning more cleanly.
Two separately breaker-protected load banks
Rather than treating all outlets as one pool, the PDU splits them into two separately metered and breaker-protected 15A load banks (each with its own 3 C19 and 12 C13 outlet grouping). This design choice can help keep one side from masking an overload risk on the other side and can simplify how you distribute devices across power feeds.
0U vertical rack-mount design
The unit is built as a 0U vertical mount (about 63.75 inches tall), which is intended to deliver rack capacity without consuming a U slot. It includes mounting options for vertical installation and includes hardware intended to support common rack setups, including compatible racks and other surfaces.
Performance and real-world usability (based on buyer feedback)
Review themes tend to align with what this device is built to do. Buyers repeatedly mention that the meter readout is practical for staying aware of how close they are to the PDU’s limits. The “two sides” approach also comes up as a reason the unit feels easier to manage than simpler, non-metered power strips. Setup expectations also matter for fit, with buyers noting it’s intended for server or industrial electrical standards, and that it will not behave like a plug-and-play residential accessory.
Pros and cons
Pros
- Continuous amp monitoring helps with load awareness (two displays, one per load bank)
- Outlet mix suits mixed rack gear: C19 plus C13 in a 6/24 arrangement
- Load separation via two separately breaker-protected 15A banks
- 0U vertical form factor helps preserve U space in racks
Cons
- Compatibility depends on matching your facility power (208/240V) and using the correct input plug type
- Vertical, tall footprint may be less convenient if your rack layout prefers shorter horizontal PDUs
Who should buy this PDU
- You run a 208/240V rack or server-room environment and want a metered PDU for day-to-day power awareness
- Your rack gear uses a blend of C19 and C13 power cords
- You want separate current readouts per load bank to support load balancing and safer distribution
- You prefer a 0U vertical solution to avoid consuming valuable rack units
Who should avoid it
- You need a residential-friendly PDU, or you are not set up for the L6-30P style input and typical server-room wiring standards
- Your rack constraints require a very compact, short PDU form factor rather than a tall vertical unit
- Your equipment plugs do not match C19 and C13, and you do not want to rely on adapters
Price and availability
Pricing can vary by retailer, and current availability may be limited at times. If you need this exact outlet mix, metering approach, and 208/240V compatibility, check the latest listing before planning installation timing.
Bottom line
The Tripp Lite PDUMV30HV is a metered 0U vertical PDU tailored to rack and server-room use cases where amp-level visibility and load separation matter. If your equipment uses C19 and C13 cords and your power input matches the intended 208/240V design, the two separate displays and split breaker banks are the standout reasons to choose it. If you need a simpler, more universal plug style or a more compact footprint, you may want to look for a different PDU form factor and input compatibility.
FAQs
What does the PDU meter display?
It shows current (amps) using a pair of built-in 2-character LED displays, with one display for each of the PDU’s two separately breakered load banks.
How many outlets does the PDUMV30HV have, and what types?
It has 30 outlets total, including 6 C19 outlets and 24 C13 outlets.
Is this PDU designed for 208/240V?
Yes. It is intended for 208/240V single-phase rack power applications, and it uses an L6-30P style input plug.
Does it split outlets into separate load banks?
Yes. The outlets are arranged into two separately metered and breaker-protected load banks.
Will it work in a residential setup?
It is designed for server-room style power and uses an industrial input plug configuration, so it is generally not a straightforward swap for typical residential outlets.
Does it take up a rack U space?
No. It’s a 0U vertical rack-mount PDU.
Specifications
| Product Title | Tripp Lite Metered PDU, 30A, 30 Outlets (6-C19 & 24-C13), 208/240V, L6-30P, 10 ft. Cord, 0U Vertical Rack-Mount Power (PDUMV30HV) |
|---|---|
| Category | Electronics > Power Accessories > PDUs |
| Brand | TRIPP LITE |
| Manufacturer | TRIPPLITE |
| Model Number | PDUMV30HV |
| Color | Black |
| Material | Metal |
| Size | 30 Amps |
| Item Weight | 3600 Grams |
| Product Dimensions | 63.75"D x 63.75"W x 63.75"H |
| UPC | 037332139351 |
| Global Trade Identification Number | 00037332139351 |
| Mfr Part Number | PDUMV30HV |
| Built-In Media | PDUMV30HV 63.75 inch Metered PDU; Plug-lock inserts (6 C20, 24 C14); Spare installation buttons, 2.9 mm/4.6 mm; Set of mounting brackets and installation hardware; Owner's Manual |
| Item Dimensions D x W x H | 63.75"D x 63.75"W x 63.75"H |
| Compatible Devices | Server |
| Mounting Type | Rack Mount |
| Enclosure Material | Metal |
| Is Assembly Required | No |
Recommended next
Tripp Lite PDU Switched 1.4kW 16 5-15R 120V 15A LX Platform Interface 5-15P Vertical (PDUMV15NETLX)
A vertical, rack-mount switched PDU designed for network and IT environments that need per-outlet control plus remote monitoring. The LX Platform interface supports secure web access and multiple network protocols, but buyer-review evidence is limited (only two ratings), so fit depends heavily on your monitoring and rack orientation needs.
StarTech.com 1U 19 inch 8 Port Rack Mount PDU (PDU08C13H)
A 1U, horizontal rack-mount PDU with eight IEC C13 outlets and built-in circuit protection, designed to tidy installs in standard 19-inch server racks. Best for setups that need organized power distribution, but buyers should plan carefully around input connection fit and total load to avoid nuisance breaker trips.
Yuarise 9 Channel/Port DC 12V 10 Amp Security Camera Power Supply Distribution (Metal Box, 9 Outputs)
A compact 9-output DC 12V power distribution box for CCTV, IP cameras, and DVR setups that want per-channel protection. It offers a total 10A max (up to 1A per channel) with independent fuses and LED indicators, but you need to confirm your cameras’ current draw so the total load fits within spec.
2 Way Distribution Box with Distribution Case for Outdoor (20A 32A)
This outdoor-rated 2-way distribution box is designed for compact power protection in sheds, garages, and similar locations, with an IP65 case and a dual MCB setup that can be configured around 6A/16A/20A with a 32A rating. It can be a good fit when you need a small, wall-mountable distribution enclosure, but wiring layout and compatibility are crucial, especially for neutral and ground routing.