100 Pcs 18650 Lithium Battery Cell Holder, Battery Storage Box
Quick take
This 100-piece set of plastic 18650 cell holders is designed for DIY lithium-ion battery packs, where you need a consistent way to space and support cylindrical cells. Buyers highlight that the holders clip together easily, line up cells neatly, and provide space for nickel strip connections. The biggest buying caveat is fit planning, you will still need to carefully align clips and confirm your exact cell and pack layout requirements.
Pros and cons
Pros
- Bulk quantity (100 pieces) for building or rebuilding DIY 18650 packs.
- Clip-together design helps separate and line up cylindrical cells.
- Built-in spacing that leaves room for nickel strips during assembly.
- Hole diameter is listed around 18.4mm, made specifically for 18650 cells.
- Card-slot edge design allows combining holders and using 18360 spacers.
Cons
- Alignment matters during stacking, if the connections are off the next layer may not fit correctly.
- Plastic cell holders are aimed at DIY support and organization, not a complete protective enclosure by themselves.
- Best for 18650-only or 18650 plus spacer workflows, it is not a universal battery mount for other cell sizes.
What buyers think
Buyer-review evidence is positive but concise. The most consistent themes focus on assembly usability and pack layout. Multiple reviewers describe the holders as easy to use and as doing a good job separating and lining up 18650 cells, especially once clips are connected correctly. Several comments specifically mention that nickel strip space exists between cells, which can make the DIY build process more straightforward. There is also limited evidence that careful attention to connection alignment is important to ensure upper layers fit properly. Overall, buyer-review evidence is limited in detail, but the direction is clear: these holders work well for the basic job of holding and spacing cylindrical 18650 cells during a DIY pack build.
What this battery holder is for
These 18650 cell spacers and holders are intended for DIY lithium-ion battery packs built from cylindrical 18650 cells. The design emphasizes physical spacing and consistent placement, which matters when you are trying to keep cells stable while adding nickel strips for series or parallel connections and when you want an organized pack layout instead of using loose adhesive or makeshift supports.
Key specs that affect fit
- Designed around 18650 cell size: The listed hole diameter is 18.4mm (0.7 inch), which is meant for 18650 cylindrical cells.
- Bulk count: Includes 100 holders, which suits multi-cell builds or users planning to rebuild or experiment.
- Combining system: The edge includes a card slot to connect holders together, and it can also be combined with 18360 battery spacer pieces (for mixed workflows).
- Cell spacing and connection room: Reviews mention space in between cells that supports nickel strip connection work.
- Material and use case: The holders are described as plastic with impact resistance, heat resistance, and electrical properties, aimed at safer organization for DIY battery packs.
Pros and cons for real DIY builds
Pros that matter during assembly
- Neater layout: Clip-together holders help keep cells separated and aligned, making it easier to build a structured pack.
- Simplifies strip placement: The spacing between cells is a practical benefit for nickel strip connection, reducing the “cells shifting while you work” problem.
- Sturdy once assembled: Reviewers specifically describe the assembled holders as sturdy.
Tradeoffs and buyer-fit considerations
- You still have to assemble carefully: If connections are not lined up properly, stacking can become difficult and the next layer may not fit right.
- Not a full battery case: The holders focus on cell spacing and support. If your project needs a sealed or fully enclosed battery pack, you will likely want an external enclosure or protective housing design.
- Cell size verification is on you: The holder is intended for 18650 cells, so confirm your cells match the intended diameter and your pack plan is compatible with the holder geometry.
Who should buy this
- DIY battery hobbyists building small to medium 18650 packs who want a consistent mechanical layout.
- Builders who prefer organized nickel strip connections and want built-in spacing between cells.
- People who need a large quantity (100 pieces) for multi-cell configurations or iterative rebuilds.
Who should skip it
- If you need a finished, enclosed battery pack: these are holders and spacers, you will still need an enclosure and appropriate battery protection components for a complete system.
- If your project uses non-18650 cylindrical cells: this set is sized for 18650 workflow.
- If you want minimal assembly effort: clip alignment is straightforward, but you do need to pay attention during stacking to avoid fit issues.
Price and availability
This item is listed as in stock for the US market. The page shows a wide list price versus a current price, so it is worth checking the live listing for the actual cost before ordering. Use the button below to view the latest price on Amazon.
Alternative approaches to consider
If you are comparing options, choose based on what you value most for your pack build:
- For the cleanest DIY layout: similar clip-style holders or spacer systems are typically the easiest path to consistent spacing for nickel strips.
- If you only need a few cells: buying a smaller quantity kit can be more cost-effective than a 100-piece bulk set.
- If your priority is full enclosure protection: look for cell holder systems that integrate into a complete protective battery case or enclosure design, so you do not need to engineer the outer shell separately.
Bottom line
The 100-piece 18650 cell holder set is a practical choice for DIY builders who want cells separated, aligned, and spaced for nickel strip connections. Expect the main success factor to be assembly alignment, take your time clipping and stacking, and you should get a cleaner, more stable pack layout than loose or adhesive-only methods.
FAQs
Are these holders compatible with 18650 batteries?
Yes. They are made for 18650 cells, with a listed hole diameter of about 18.4mm (0.7 inch).
Do they leave space for nickel strips?
They are designed with spacing between cells, and buyer feedback commonly mentions that there is room for nickel strip connections during assembly.
How do these holders connect to each other?
The edge includes a card-slot style connection, allowing holders to be clipped together into the size and arrangement you need.
Can I combine these holders with 18360 spacers?
The design supports combining with 18360 battery spacers using the card-slot connection on the edge.
What is the main downside to watch for?
Alignment during assembly matters. If the connections are not lined up correctly when stacking layers, the next layer may not fit as expected.
Will this replace a full battery enclosure?
No. These are cell holders and spacers, focused on organizing and supporting the cells. For a complete battery system, you typically still need an appropriate outer enclosure and proper battery protection components.
Specifications
| Product Title | 100 Pcs 18650 Lithium Battery Cell Holder, Battery Storage Box Cell Spacer Bracket Stand Plastic Battery Pack Bracket Cylindrical Cell Battery Stand for DIY Fixed 18650 Battery |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | FOWIUNYE |
| Manufacturer | FOWIUNYE |
| Item Weight | 0.17 Kilograms |
| Warranty Description | NO |
| Battery Cell Type | Lithium Ion |
| Battery Capacity | 1800 Milliampere Hour (mAh) |
| Reusability | Rechargeable |
| Unit Count | 1.0 Count |
| Battery Weight | 130 Grams |
| Antenna Location | Power Tool |
| Battery Cell Composition | Lithium Ion |
| Recommended Uses For Product | Power Tool |
Recommended next
DORHEA 12PCS 18650 Battery Holder Bundle with Wire 18650 Battery Holder Case (1/2/3/4 Slots)
This DORHEA 12-pack bundle includes 1-, 2-, 3-, and 4-cell 18650 holders (with preinstalled red and black leads) for DIY battery projects and replacements. It is a budget-friendly way to build common 3.7V to 14.8V series configurations, with a key caveat: the included wire gauge is fairly small and the holders can be tight to remove individual cells.
California JOS 3 PCS 9V Battery Connector, 9 Volt Buckle Connector Hard Plastic Shell (T-Type)
The California JOS 3 PCS 9V Battery Connector is a practical 9V-specific clip style connector for repairs and DIY STEM projects, with a hard plastic shell and metal terminal for a sturdier feel. Buyers mainly report easy soldering and solid results for replacing broken 9V battery leads, with one notable caveat about corrosion when left exposed outdoors.
2 Pcs Metal Ry-obi 18V Battery Holder/Battery Wall Mount Rack for Ryobi 18V Battery Storage with 3 Slots
These 2-pack metal wall mounts help you store Ryobi 18V slide-style batteries in a cleaner, more organized way. Buyers like the heavy steel build, stable fit for Ryobi One+ batteries, and straightforward mounting, with the main caveat being that you need solid mounting hardware and a good screw fit to avoid small tilting.
2Pcs 18650 Battery Holder Li-ion Battery with Single Compartment, 18650 battery bank & battery backup
A compact 18650 battery holder plus a USB output and micro-USB charging module, sold as 2 sets. It is designed for DIY builds that need simple power management (3V and 5V options) and basic protection features, with a couple of practical tradeoffs around standby drain and guidance.