(10) 4 Gauge Copper Ring Terminals 3/8" Blue/Black Heat Shrink Tubing Lugs
Quick take
This kit includes 10 copper ring terminals built for 4 gauge wiring, plus heat shrink tubing to help keep connections neat and protected. Buyers tend to describe the terminals as solid and high-quality, but the main caveat is compatibility, you may find them oversized for your specific 4 gauge wire, and crimping requires the correct tool.
Pros and cons
Pros
- 10-pack of 4 gauge copper ring terminals with a 3/8" stud size.
- Includes heat shrink tubing (blue/black) for a cleaner-looking install.
- Buyer feedback highlights strong copper construction and good fit for car audio uses.
- Temperature rating listed at 257°F.
Cons
- You will need a proper crimping tool, these are not “hand-crimp” connectors.
- Some buyers note they may be too large for most 4 ga wire, double-check your cable and ring fit.
- They are ring-style terminals, so they are not ideal if your setup needs different connector types (like spade or butt connectors).
What buyers think
Buyer-review evidence is strongly positive on build quality and connection reliability. Multiple reviews describe the terminals as solid, with thick copper and good contact, and note they worked well for car audio wiring tasks. Several buyers also mention the heat shrink as a convenient addition for finishing the job, with installation described as straightforward once the right crimping setup is available. The most repeated practical caution is fit, some people report these rings may be too large for common 4 gauge wire, so matching your wire size and terminal ID matters.
What these ring terminals are for
These are 4 gauge copper ring terminals intended for terminating wiring to a stud or bolt connection in car audio and similar vehicle electrical projects. The ring style helps keep the connection secure when tightened, which is especially useful for power and ground runs where you want consistent contact.
Key specs that affect compatibility
- Connector type: ring terminal
- Stud size: 3/8"
- Wire size: 4 gauge (the kit is marketed for 4 ga use)
- Material: copper, with copper contact material
- Temperature rating: 257°F
- Included: (10) ring terminals and heat shrink tubing
Installation reality check (what you should plan for)
These terminals require a crimping tool that matches ring terminals and the wire gauge you are using. Reviews specifically call out that you should have a crimping tool on hand before buying. If your current crimp setup is mismatched, you can end up with an unreliable crimp, even with high-quality terminals.
You should also verify physical fit before you commit. The listing note and buyer feedback point to a potential issue where the terminals may be too large for most 4 ga wire. If you have a nonstandard 4 gauge cable type, different strand count, or a wire that measures larger than typical, trial-fitting (and measuring the wire insertion into the barrel) can prevent frustration.
Pros and cons, in plain terms
When they’re a good match
- You are building or upgrading a car audio wiring run that uses 4 gauge power or ground and accepts a 3/8" stud ring.
- You want heat shrink included so you can finish connections with less extra shopping.
- You have, or can borrow, a crimping tool that works with ring terminals.
When you should look elsewhere
- Your equipment or terminal stack uses a different stud size, or you need a different connector style.
- Your “4 gauge” wire tends to run large or behaves differently than typical 4 ga, because these rings may be oversized for some cables.
- You do not have a suitable crimping tool and are aiming for a no-tool or minimal-tool workflow.
Value: are they worth it?
If you already know you need 4 gauge copper ring terminals with a 3/8" stud and you will be using heat shrink, this kit checks the common boxes at a practical quantity of 10. The main value limiter is compatibility. Spend your time confirming that your 4 gauge wire and the ring barrel size match, and that you have the right crimp tool. If those checks pass, buyer feedback suggests you can expect solid contact and a clean, car-audio-appropriate finish.
Price and availability
Pricing and stock can change. For the latest cost and availability for this specific 10-pack, use the link below.
FAQ
What wire gauge are these ring terminals for?
They are intended for 4 gauge wiring.
What is the stud size?
The ring terminal is sized for a 3/8" stud.
Do they include heat shrink tubing?
Yes, the kit includes heat shrink tubing along with the ring terminals.
Do I need a crimping tool?
Yes. Reviews specifically note that a crimping tool is required for these terminals.
Will these fit all 4 gauge wire?
Not necessarily. There is a caution that they may be too large for most 4 ga wire, so it is important to confirm physical fit with your specific cable.
Specifications
| Product Title | (10) 4 Gauge Copper Ring Terminals 3/8" Blue/Black Heat Shrink Tubing Lugs |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | Sky High Car Audio |
| Manufacturer | Sky High Car Audio |
| Material | Copper |
| Connector Type | Ring |
| Terminal | Ring Terminal |
| Temperature Rating | 257 degree fahrenheit |
| Contact Material | Copper |
| Material Type | Copper |
| Stud Size | 3/8 |
| Brand Name | Sky High Car Audio |
| Model | SHA-4LUG-BLBK |
| Part Number | SHA-4LUG-BLBK |
| UPC | 747150663289 |
Recommended next
7 INCH Security Face Panel for Double Din CAR DVD review
A 7-inch faux “security” face panel designed to cover parts of a double-din car DVD screen and discourage theft. Buyers say it can work well when your unit has the right gap between the screen bezel and the dash housing, but recessed installs may require trimming or extra mounting help to stay secure.
9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019)
This ABS plastic dash trim kit is designed to help you mount an aftermarket radio in a Toyota RAV4 (2013-2019). It supports setups that use either a 7-inch frame or a 9-inch radio, with the smaller frame option also enabling a double-DIN install. The main caveat is that some buyers report missing mounting hardware or clips, so double-check what’s included before you start.
Sky High Car Audio E-Series Big 3 Upgrade Kit 1/0 & 4 Gauge CCA Power Wire Alternator Battery Ground Wiring Kit (Red/Black)
The Sky High Car Audio E-Series Big 3 Upgrade Kit is a cut-to-fit CCA wiring set designed to replace key alternator-to-battery and ground runs. It’s a straightforward way to clean up electrical connections, with pre-terminated ring terminals and heat-shrink included, but you will need to confirm cable gauge and routing requirements before buying.
179x105mm Opening Dash Installation Trim Kit for BMW 3 Series M3 E46 Double Din Radio Stereo DVD Facia
This ABS dash trim panel is designed for installing a double-DIN radio or multimedia head unit into a BMW 3 Series (E46) from 1998 to 2006, with an 180 x 105 mm opening size requirement. It can work well for straightforward installs, but buyers caution that fit may require extra trimming or fabrication depending on the head unit and installer approach.