9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019)
Quick take
This dash trim kit by DKMUS is made for installing an aftermarket radio in a Toyota RAV4 from 2013 to 2019. It is built from ABS plastic and is intended to handle both 7-inch and 9-inch radio setups, with the smaller frame configuration also working for double-DIN installs. The most common buying caveat is that some installs may require using hardware or clips you already have, since a few buyers report missing mounting parts.
Pros and cons
Pros
- Designed specifically for RAV4 2013-2019 stereo mounting.
- ABS plastic trim, positioned as a replacement-style bezel.
- Supports both 7-inch and 9-inch radios, including a double-DIN-capable smaller frame setup.
- Fitment feedback from buyers is generally positive (many mention it fits well).
Cons
- Some buyers report it may not include all mounting hardware, clips, screws, or instructions.
- Because trim kits can be configuration-sensitive, you need to confirm your radio size and mounting style before ordering.
What buyers think
Buyer-review evidence is limited but directionally consistent on fitment. Several reviewers describe the kit as fitting well in their RAV4 (including model years like 2015 and 2010), and one called it “perfect” in their vehicle. Where feedback gets more mixed is around what ships in the box. Some buyers reported missing mounting hardware or clips, and at least one mentioned the kit leaving exposed areas near the climate controls that an OEM mount kit had covered. Overall, the reviews suggest the core trim fit is usually good, but it is worth planning for potential “missing pieces” during installation.
Who this dash trim kit is best for
- You’re installing an aftermarket radio in a Toyota RAV4 (2013-2019) and need the bezel/trim to mount it cleanly.
- Your radio plan involves either 7-inch or 9-inch head unit sizing (depending on how you configure the kit).
- You want a double-DIN-capable mounting option using the smaller frame configuration.
Who should avoid it
- You need an OEM-style “all-covered” dash appearance, especially along the climate-control edges, and you cannot tolerate gaps.
- You prefer a plug-and-play box with every screw, clip, and bracket included, since some buyers report missing mounting hardware.
- Your vehicle or dash setup is outside the intended 2013-2019 RAV4 fitment, or you cannot confidently verify radio size and mounting requirements before installing.
Key features that matter during install
Fitment window: RAV4 2013-2019
This kit is intended for the Toyota RAV4 model years 2013 through 2019. If you are outside that range, you should not assume fit without checking compatibility for your specific dash layout.
Radio size support: 7-inch and 9-inch
The kit is described as working with both 7-inch and 9-inch aftermarket radios. It also notes a smaller frame arrangement that can support double-DIN radios, while a larger 9-inch configuration installs directly.
Material: ABS plastic
It is made from ABS plastic and is positioned as a replacement bezel. In practice, this matters because dash trim typically needs to hold its shape and align well around the radio opening.
Pros and cons summary
If your goal is a straightforward bezel solution for a RAV4 2013-2019 stereo swap, this kit appears to be a solid starting point. The primary risk is not the trim material or general fit, it is whether you will receive every installation component you expect, plus how well it matches coverage around nearby dash controls for your specific radio and configuration.
Price and availability
Pricing and stock levels can change frequently. Check the current listing to confirm cost and what is included in the box before you begin your install: Buy on Amazon.
Alternatives to consider
- OEM-style mounting kits made for your exact radio size: If you are sensitive to trim coverage around climate controls, OEM-style mounts for a specific double-DIN or single-DIN sizing may reduce appearance mismatches.
- Universal or aftermarket radio mounting solutions: These can work when you have flexibility in bracket selection, but fitment and bezel alignment may require more custom adaptation.
- Bundles that include full mounting hardware: If missing clips or screws would be a problem, prioritize kits or bundles that explicitly list included brackets, clips, and screws for your vehicle and radio type.
FAQ
Will this dash trim kit fit a Toyota RAV4 from 2013 to 2019?
It is intended for RAV4 model years 2013-2019, which is the safest fitment range to use when planning your install.
Does this kit work with both 7-inch and 9-inch aftermarket radios?
Yes, the kit is positioned as compatible with both 7-inch and 9-inch radio setups, with different configurations for how the radio is mounted.
Can I install a double-DIN radio with this kit?
It supports a double-DIN install using the smaller frame configuration, while the larger configuration is described as installing 9-inch radios directly.
Does it come with mounting hardware and clips?
Review feedback is mixed on included parts. Some buyers report missing mounting hardware, clips, screws, or instructions, so it is smart to verify the box contents or plan to use compatible hardware if needed.
Are there any appearance coverage concerns?
If perfect coverage is a must for you, confirm your exact configuration before purchasing.
How can I avoid compatibility mistakes before ordering?
Match your radio size (7-inch vs 9-inch), double-DIN vs other mounting style, and your exact RAV4 model year (within 2013-2019) to the kit’s intended use, and double-check the included mounting parts you will need.
Specifications
| Product Title | 9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | DKMUS |
| Manufacturer | DKMUS |
| Item Weight | 5.3 ounces |
| Model | for RAV4 Dash Kit |
| Package Dimensions | 8.66 x 7.09 x 1.57 inches |
| Item model number | 2013-2019 |
| Manufacturer Part Number | RAV4 |
Available variants
Model
- 2006-2012
- 2013-2019
- 2001-2005
Recommended next
7 INCH Security Face Panel for Double Din CAR DVD review
A 7-inch faux “security” face panel designed to cover parts of a double-din car DVD screen and discourage theft. Buyers say it can work well when your unit has the right gap between the screen bezel and the dash housing, but recessed installs may require trimming or extra mounting help to stay secure.
Sky High Car Audio E-Series Big 3 Upgrade Kit 1/0 & 4 Gauge CCA Power Wire Alternator Battery Ground Wiring Kit (Red/Black)
The Sky High Car Audio E-Series Big 3 Upgrade Kit is a cut-to-fit CCA wiring set designed to replace key alternator-to-battery and ground runs. It’s a straightforward way to clean up electrical connections, with pre-terminated ring terminals and heat-shrink included, but you will need to confirm cable gauge and routing requirements before buying.
179x105mm Opening Dash Installation Trim Kit for BMW 3 Series M3 E46 Double Din Radio Stereo DVD Facia
This ABS dash trim panel is designed for installing a double-DIN radio or multimedia head unit into a BMW 3 Series (E46) from 1998 to 2006, with an 180 x 105 mm opening size requirement. It can work well for straightforward installs, but buyers caution that fit may require extra trimming or fabrication depending on the head unit and installer approach.
(10) 8 Gauge Copper Ring Terminals 3/8" Red/Black Heat Shrink Tubing Lugs
These Sky High Car Audio 8 gauge copper ring terminals come as a set of 10, each paired with red and black heat shrink tubes. Buyers highlight the solid, sealed build quality, with reviews noting an effective fit when the cable is properly sized.