ULANZI PK-07 Protective Case Cover Lens Protector Cap for DJI Osmo Pocket 3/Xtra Muse
Quick take
The ULANZI PK-07 is a compact protective cover made to shield the DJI Osmo Pocket 3 gimbal and camera screen during everyday transport. Buyers like that it adds protection without becoming bulky, and the flap-style design helps it stay in place, with a build that aims to handle dust and scratches. The main caveat is that it is not water resistant, so it is best viewed as protection for travel and storage, not for wet conditions.
Pros and cons
Pros
- Designed specifically for DJI Osmo Pocket 3, with support for Xtra Muse use cases.
- Flap-style cover helps protect the gimbal and screen from multiple angles during transport.
- Slim, pocket-friendly design, with buyers reporting it is easy to slide in and out.
- Semi-transparent construction lets you check your battery level without fully removing the cover.
- Noted as a sturdy, lightweight option for travel-focused creators.
Cons
- Not water resistant, so it should not be relied on in rain or wet environments.
- Works best as a cover system, not as a fully sealed hard case for heavy impacts.
- Compatibility with add-on gear depends on the specific ULANZI ecosystem adapters or storage bag fit.
What buyers think
Buyer-review evidence centers on protection, compactness, and day-to-day usability. Multiple shoppers highlight that the cover does a good job protecting the Pocket 3 screen, and several specifically mention it feels less bulky than the original DJI protective option. Ease of use comes up often, with buyers describing smooth pocket storage and straightforward on and off handling. Another recurring theme is travel value, with the case chosen to keep setups lightweight for gigs and professional work. Review evidence also suggests the product is appreciated for fit and practicality, though detailed reporting on long-term drop performance or real-world weather resistance is limited.
Who this is for
- Travel and pocket carry users who want a slimmer protection layer for Osmo Pocket 3 rather than a bulkier case.
- Creators who pack between gigs and need dependable screen and gimbal shielding during storage and transport.
- Battery-checkers on the go who prefer not removing a cover just to see status, thanks to the semi-transparent design.
- Those using ULANZI accessories who want an accessory cover that aligns with ULANZI’s Pocket 3 expansion and storage options.
Design and protection, explained
The PK-07 is a case cover designed around the Pocket 3’s key exposed areas: the gimbal and the camera lens/screen region. Its flap design is meant to shield the device from multiple angles while keeping the cover compact. The material is semi-transparent, which is a practical feature for quick status checks, like viewing battery level without taking everything apart. The overall build is positioned as impact, dust, and scratch protection for everyday handling, not a weatherproof shell.
Size and portability tradeoffs
A major reason buyers choose this kind of accessory is to reduce pack bulk. Reviews repeatedly describe it as not bulky and easy to slide into pockets or storage areas, which points to a key benefit for users who carry Pocket 3 in a bag or even on-person. One tradeoff that shows up in usage descriptions is that the cover solution may still require a specific handling workflow depending on how you remove the camera and how you like to hold it during filming. That is more of a routine preference than a deal-breaking flaw, but it is worth considering if you like one-handed quick access.
Compatibility notes to confirm before buying
- Core fit: Designed for DJI Osmo Pocket 3.
- Xtra Muse: Mentioned as compatible for Xtra Muse setups.
- Accessory ecosystem: It is described as compatible with specific ULANZI Pocket 3 adapters (for example, PK-06 expansion adapter) and designed to fit the PK-04 Pocket 3 storage bag.
- Water resistance: It is not water resistant, so plan on adding separate weather protection if your shoots include rain or heavy mist.
Pros and cons (real buyer decision points)
Why it’s a good match
- You want screen and gimbal protection with minimal added bulk.
- You prefer to keep your Pocket 3 protected during transport, especially for travel jobs and quick swaps.
- You like the convenience of checking battery level without fully removing the cover.
When you might want something else
- You need weather resistance, because this cover is not water resistant.
- You want a fully sealed, hard-shell solution for frequent drops or rugged outdoor conditions.
- You use Pocket 3 setups that require non-standard accessory routing, where cover fit might conflict.
Verdict
The ULANZI PK-07 is a practical protective cover for DJI Osmo Pocket 3 owners who prioritize pocket-friendly travel and want solid shielding for the screen and gimbal. Based on buyer feedback, it offers a slimmer alternative to bulkier protective options while remaining easy to live with during transport. If your content work often includes wet conditions or you’re looking for true water resistance, you will likely need a different protection approach. Otherwise, it is a straightforward buy for everyday carry and gear-protection habits.
FAQ
Does the ULANZI PK-07 fit DJI Osmo Pocket 3 only, or is it usable with Xtra Muse too?
It is designed for DJI Osmo Pocket 3 and is also described as compatible with Xtra Muse setups.
Is the PK-07 water resistant?
No, it is not water resistant. Use it as protection for dust and scratches during transport, and add separate weather protection if you expect wet conditions.
Will the cover be bulky in a pocket or small bag?
Buyers commonly describe it as not bulky and easy to slide in and out, which suggests it is intended for pocket or compact storage use.
Can you check battery level without removing the cover?
Yes. The design is semi-transparent, so you can view battery level without taking the cover off.
Does it work with other ULANZI Pocket 3 accessories or storage bags?
It is stated to be compatible with certain ULANZI Pocket 3 accessories, including the PK-06 Pocket 3 expansion adapter, and designed to fit the PK-04 Pocket 3 storage bag.
Specifications
| Product Title | ULANZI PK-07 Protective Case Cover Lens Protector Cap for DJI Osmo Pocket 3/Xtra Muse Protective Case Cover Accessories, Pocket 3 Gimbal Cover and Camera Lens Screen Protector |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Action Camera Accessories |
| Brand | ULANZI |
| Manufacturer | ULANZI |
| Model Number | PK-07 |
| Color | Black |
| Compatible Devices | DJI Osmo Pocket 3 |
| Form Factor | Case |
| Additional Features | Foldable, Lightweight, Screen Protector |
| Compatible Phone Models | DJI Osmo Pocket 3 |
| Water Resistance Level | Not Water Resistant |
| Pattern | NO |
| Shell Type | Hybrid |
| Enclosure Material | Plastic |
| Unit Count | 1.0 Count |
| Mfr Part Number | PK-07 |
| Warranty Description | 3 months |
Recommended next
SmallRig R50 Cage for Canon R50 Camera, Aluminum Alloy with Quick Release Plate for Arca Stand, Cold Shoe, NATO Rail and Threaded Holes - 4214
The SmallRig 4214 is a purpose-built cage for the Canon EOS R50 that keeps full access to key controls while adding mounting options like a bottom Arca-style quick release plate, a cold shoe, and NATO-style side rail space. It’s a solid fit for filmmakers and creators who want to rig their R50 for handheld, tripod, or gimbal setups, with the main caveat being that it is not a full grip-cage style solution.
Sametop Floating Handle Grip Floaty Stick Waterproof Handler Accessory (Green)
A compact floating hand grip for action cameras that helps prevent sinking in the water, improves steadier shooting versus handheld aiming, and doubles as a storage spot for small items. Best for GoPro and many other action camera users who film near water, but it is only a practical solution if you pair the grip with the right camera mount and buoyancy expectations for your exact setup.
TELESIN Electric Magsafe Car Mount Vacuum Magnetic Car Phone Holder
The TELESIN electric MagSafe-compatible car mount uses an electric vacuum suction base plus a strong magnet to keep a phone or compatible device stable while driving. It’s built around 360° positioning and folding arms for easier storage, but buyers should consider battery charging needs and whether textured dashboard surfaces require the included pad.
Insta360 Bullet Time Cable for X3, One RS (Without 1 inch 360), One, One X2, One R, One X
The Insta360 Bullet Time Cable is a compact cable-style handle made for smoother, repeatable spin shots with compatible Insta360 cameras. It’s praised for being easy to set up and much more travel-friendly than longer handle options, with one common tradeoff: controlling the swing can feel different than an L-style handle. If you want a more portable way to capture Bullet Time sequences, it’s a strong accessory, especially for visitors, athletes, and outdoor shoots.