Silicone Skin + Holders for The New Rectangular EZ Pass with Interlocking Strips (NJ, PA...)
Quick take
This kit combines a flexible black silicone wrap with suction-cup mounting hardware, built to fit the new rectangular EZ Pass style that uses interlocking strips (flat on the back). It is a good match if you want an all-black, adhesive-free windshield setup, but you must confirm your transponder shape first, since it does not fit other EZ Pass models.
Pros and cons
Pros
- Flexible silicone full wrap helps protect the transponder and keeps a neutral black look.
- Includes black suction cups plus plastic adapter pieces for mounting without windshield adhesive.
- Designed specifically for rectangular EZ Pass units with interlocking strips that are flat on the back side.
- Includes components intended to reconfigure back to a no-skin setup if you change your setup later.
Cons
- Compatibility is strict, it does not fit other EZ Pass shapes or models.
- Setup can be difficult, especially installing the suction cups, which may require considerable force.
- Some buyers note the side-cover design can leave portions of the center exposed.
What buyers think
Buyer feedback for this kit is mostly straightforward: it generally does the job when it matches the correct EZ Pass model. Several reviews describe the product as working as expected and fitting the newer rectangular NJ EZ Pass setup. Where buyers diverge is mainly around installation effort. At least some purchasers report that attaching the suction cups can be challenging and may take significant pressure, and a few mention that the cover design leaves parts of the transponder area uncovered.
Who this is for
- You have the newer rectangular EZ Pass with interlocking strips and a flat back, like the EZ Pass used in NJ and similar variants referenced by buyers.
- You want an all-black look and prefer avoiding windshield adhesive.
- You want a kit with mounting hardware included, not just a cover.
Who should skip it
- Your transponder is a different shape (not the rectangular model with interlocking strips that are flat on the back).
- You need an extremely easy, quick setup. If you are sensitive to DIY installs, the suction-cup attachment may feel more difficult than expected.
- You want full coverage with zero exposed center area, since some users have pointed out partial exposure based on the cover’s side sections.
Design and compatibility overview
This product focuses on two things: protecting and visually integrating your transponder, and mounting it to the windshield without adhesive. The silicone skin is meant to wrap the transponder in an all-black finish. For attachment, the kit includes a pair of black suction cups and plastic adapter parts designed to connect securely to the transponder’s interlocking-strip system.
Compatibility matters here. It is intended for the newer rectangular EZ Pass with interlocking strips (flat on the back). It is not designed for other EZ Pass models or for transponders that already come with their own suction-cup system.
Setup experience (what to expect)
Expect installation to take a bit of muscle, especially when applying the suction cups. Review evidence indicates that the suction-cup installation may require exceptional force for some buyers. If you choose this kit, plan to follow the instructions carefully, and take your time aligning everything before fully seating the cups.
Pros and cons, compared to your alternatives
If you are choosing between adhesive vs. suction
- Choose suction like this if you want removability and an adhesive-free windshield approach.
- Consider adhesive-style options if your priority is the simplest installation, but only if you are comfortable with adhesive mounting on glass.
If you are choosing between “cover-only” vs. “cover + mount”
- Choose this kit if you want one package that includes both the silicone wrap and the suction-cup holders.
- Choose a cover-only option if you already have a compatible mounting method and you mainly want the look and protection benefits.
Verdict
The Silicone Skin + Holders kit is a solid pick for drivers with the newer rectangular EZ Pass that uses interlocking strips, especially if you want a black, stealthy look without adhesive. The main tradeoffs are strict compatibility and a potentially challenging suction-cup setup. If your transponder shape matches and you are willing to take time on installation, this is the kind of targeted accessory that can make your EZ Pass setup feel more intentional.
Need to confirm fit and see the current listing? Buy on Amazon
FAQs
Does this fit all EZ Pass transponders?
No. It is intended for the newer rectangular EZ Pass style with interlocking strips that are flat on the back side. Other EZ Pass shapes and models are not supported.
Is it mounted with adhesive?
No. The kit includes black suction cups and adapter pieces designed for a no-adhesive windshield attachment method.
Is setup easy?
Setup can be difficult for some buyers, particularly installing the suction cups, which may require significant force. Careful alignment and following the instructions helps.
Is it fully black all around?
The transponder cover is designed for a neutral black look, but some buyers have mentioned that portions of the center can be left exposed due to the cover’s side sections.
What’s included in the box?
The kit includes a flexible silicone skin, a pair of black suction cups, and plastic adapter pieces used to connect the transponder to the suction cups.
Specifications
| Product Title | Silicone Skin + Holders for The New Rectangular EZ Pass with Interlocking Strips (NJ, PA...) - Includes Strong Suction Cups for an All-Black Look Without Adhesive on Your Windshield |
|---|---|
| Category | Automotive > Interior Accessories > Anti-Theft > Accessories |
| Item Weight | 1.13 ounces |
| Package Dimensions | 6.89 x 3.46 x 0.98 inches |
| Brand | IoT Slash |
| Price | USD 12.99 |
| Rating | 4.1/5 from 46 Amazon ratings |
| Best Sellers Rank | #43,202 in Automotive ( See Top 100 in Automotive ) #57 in Antitheft Accessories |
Recommended next
Viper 7345V 2-Way Remote (Replacement for 7341V & 489V)
The Viper 7345V is a 4-button 2-way replacement remote designed for select Viper security and remote-start systems (including 4305V, 3305V, and 5305V). It uses an LCD display and provides both visual and audible confirmation when commands are sent successfully, with a stated range up to 1,500 feet (and up to 1/2 mile in the feature bullets). The main caveat is making sure your Viper system is compatible, since this remote is not universal.
MechanMagic Key Fob Remote Replacement Fits for Honda Civic EX review
MechanMagic’s 3-button key fob replacement is designed for specific Honda Civic (2001–2005, select trims) and Honda Pilot (2003–2007) models. It includes a CR2 battery, supports regular-key vehicles (not push-start), and uses a self-programming process that requires a working key.
Faraday Pouch For Key Fob, RFID Signal Blocking Holder, 5.6″x3.7″
A Faraday key fob pouch designed to block incoming and outgoing signals when you store your fob. The M size (5.6″x3.7″) fits about 1 to 3 fobs depending on how they fit, and the upgraded wider U-shaped hook helps it stay accessible. Best for at-home or purse/bag storage, with the main tradeoff that the pouch can feel tight if your fob is bulky or if you need extra room for other items.
WHonor Faraday Box, RFID Key Fob Protector, 8.0" x 5.2" x 2.8" Anti-Theft Signal Blocking Shielding Cage with Faraday Pouch 2 Pack
The WHonor Faraday Box is a hard, ABS “cage” style organizer designed to block key fob and other wireless signals when you store them at home. It comes with two Faraday pouches plus two RFID blocking cards, making it a simple bundle for car-key and wallet-style protection, with the main tradeoff being you may need to get used to how the fob pouches are positioned for normal keyless use.