REOLINK PoE Switch with 8 PoE and 2 Gigabit Uplink Ports (RLA-PS1)
Quick take
The REOLINK RLA-PS1 is a fanless PoE switch designed to power up to eight PoE IP cameras while providing two gigabit uplink ports for connecting to an NVR or expanding your network. With IEEE 802.3af/at support and a 120W total power budget (30W per port), it fits most small-to-mid sized REOLINK camera builds. The main thing to plan around is power budgeting, especially if your cameras draw close to the per-port maximum.
Pros and cons
Pros
- 8 PoE ports for cameras, plus 2 gigabit uplink ports (10/100/1000Mbps).
- Supports IEEE 802.3af/at, up to 30W per PoE port, with a 120W total budget.
- Power management helps prevent overload by cutting lower-priority ports first.
- Fanless design and metal casing for quieter, more durable placement.
- Plug-and-play style setup, including auto detection so it avoids powering non-PoE devices.
Cons
- You must size your camera list to fit the 120W total power budget.
- PoE ports are 10/100Mbps (uplinks are gigabit), so camera-to-switch throughput is limited on those ports.
- It is intended for PoE camera power and network switching, not for powering non-PoE equipment.
What buyers think
Buyer feedback points to solid build quality and straightforward installation. Many reviewers highlight the metal construction, tight-fitting ports, and a clean layout (including front indicator lights). Setup is repeatedly described as working out of the box with REOLINK PoE cameras, and several comments mention stable connectivity and the switch reliably powering cameras over longer cable runs. Reliability and temperature behavior come up as well, with buyers noting it does not appear to run hot in real-world use.
Because review themes are largely consistent around build, ease of setup, and dependable power delivery, buyer-review evidence is strong for day-to-day usability in typical camera deployments. Specific negative patterns are less clear from the available excerpts, so limitations are best understood from the documented power and port-speed specifications.
Who this PoE switch is for
- REOLINK camera owners building a small system who want a single switch to power cameras and connect up to an NVR, with an easy plug-and-play setup.
- People who want gigabit uplinks to connect the switch to an NVR or extend the network with another switch while keeping the camera ports on PoE.
- Buyers who care about quiet operation, since the unit is fanless and designed for indoor or noise-sensitive spaces.
- Installers planning around a 120W PoE budget where per-port needs stay within IEEE 802.3af/at power expectations.
Key specs that matter in real installs
Ports, throughput, and uplink performance
You get 8 PoE ports rated at 10/100Mbps, plus 2 gigabit uplink ports rated at 10/100/1000Mbps. In practice, this means your camera devices connect to the switch at 10/100 speeds, while the path from the switch to your NVR or upstream network can use gigabit.
Power for up to 8 PoE cameras
The switch supports IEEE 802.3af/at, with up to 30W per PoE port and a 120W total power budget for up to 8 PoE devices. If your camera lineup uses higher power models, you need to confirm the combined draw fits within 120W.
Power management and device detection
When total allocated PoE power would exceed what the switch can supply, it uses power management that powers off lower-priority PoE ports one by one until the load is back under the threshold. It also has device detection to supply PoE only when connected devices require it, helping avoid powering non-PoE equipment.
Thermals, build, and mounting
With metal casing and a fanless design, it is positioned for quiet placement. The unit is also designed for flexible installation, including desktop or wall mounting.
Setup and everyday usability
The overall experience is typically centered on simple Ethernet cabling: you connect PoE cameras to the PoE ports, then use the uplinks to reach your NVR or existing network. Buyers commonly describe the switch as operating reliably once connected, negotiating and powering cameras without extra configuration.
One practical planning point: because PoE port speeds are 10/100, if you are optimizing for maximum network headroom between cameras and storage, you may want to think about the rest of your network design, including uplink utilization and your NVR throughput.
Pros and cons
Pros
- Good fit for REOLINK-style deployments with 8 PoE camera ports and a pair of gigabit uplinks.
- Balanced power specs for common indoor and outdoor PoE camera models (af/at, 30W per port, 120W total).
- Power management behavior helps reduce the risk of total overload by shedding lower-priority ports.
- Fanless, metal build supports quieter, longer-lasting installations.
- Auto detection helps avoid accidental PoE power to non-PoE devices.
Cons
- Power budget is the limiting factor. If you exceed 120W total, expect lower-priority ports to be cut off rather than everything running at once.
- Camera port speed is 10/100, so it is not the same as a full gigabit PoE switch for every port.
Is it worth it?
The REOLINK RLA-PS1 is worth considering if your goal is a straightforward PoE switch for a compact REOLINK camera system, with enough PoE capacity for up to eight cameras and gigabit uplinks to your NVR or network. It is especially appealing if you prefer a quieter, metal, fanless unit for shelves, racks, or wall setups. The biggest deciding factor is whether your camera power draw fits within the 120W total budget, and whether 10/100 PoE port speeds meet your performance expectations.
If you need full gigabit on every camera port or you are planning a much larger expansion, you would likely want to compare against switches with higher PoE port speeds and larger total power budgets.
Price and availability
Pricing and stock can change by seller and region. Check current availability and the latest price using the link below.
FAQs
How many cameras can the REOLINK RLA-PS1 power?
It provides 8 PoE ports intended for up to 8 PoE devices, with a 120W total power budget (30W per PoE port maximum).
Does it support IEEE 802.3af and 802.3at cameras?
Yes. It is compatible with IEEE 802.3af and IEEE 802.3at PoE standards.
Are the uplink ports gigabit?
Yes. The two uplink ports support 10/100/1000Mbps, while the 8 PoE camera ports are 10/100Mbps.
Will it power non-PoE devices?
It includes auto detection so it will supply power only when connected devices require PoE, helping avoid powering non-PoE equipment.
Is this switch fanless?
Yes. It uses a fanless design intended for silent operation.
What happens if my cameras use more than the 120W budget?
The switch manages power load. If the total allocated power exceeds what it can supply, it powers off lower-priority PoE ports one by one until the total load is back within the supported threshold.
Specifications
| Product Title | REOLINK PoE Switch with 8 PoE and 2 Gigabit Uplink Ports, Ideal for REOLINK RLN36 NVR and Power Over Ethernet IP Cameras, IEEE802.3af/at, Metal Casing, Desktop/Wall Mount, RLA-PS1 |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | REOLINK |
| Manufacturer | Reolink Digital |
| Model Number | RLA-PS1 |
| Item Weight | 1.17 Kilograms |
| Color | black |
| Number of Ports | 10 |
| Compatible Devices | Desktop |
| Maximum Power | 120 Watts |
| Upper Temperature Rating | 45 Degrees Celsius |
| Interface | PoE |
| Data Transfer Rate | 1000 Megabits Per Second |
| Switch Type | PoE Switch |
| Platform | Not Machine Specific |
| Case Material Type | Metal |
| Built-In Media | 1xRLA-PS1 PoE Switch, 1x 120W Power Adapter |
| Mfr Part Number | RLA-PS1 |
| Unit Count | 10.0 Count |
| Included Components | 1xRLA-PS1 PoE Switch, 1x 120W Power Adapter |
Recommended next
BrosTrend 2.5Gb Switch, 8 Port Network Switch 2.5 Gigabit, Unmanaged Ethernet Switch
The BrosTrend 8-port unmanaged 2.5Gb switch is a simple, fanless way to add multi-gig speeds to a small home office or gaming setup. It focuses on plug-and-play convenience, quiet operation, and using common RJ45 connections, with a straightforward limitation: it does not add managed features like VLAN.
NICGIGA 10Gbe Ethernet Switch Unmanaged with 2 x 10Gb RJ45 Ports + 4 x 2.5Gb Base-T Ports
A simple, unmanaged 6-port switch that mixes 2 x 10Gb RJ45 and 4 x 2.5Gb RJ45 for upgrading a home lab, NAS, or Wi-Fi setup. It is designed for plug-and-play use, fanless operation, and quiet 24/7 running, with the main caveat that unmanaged switches offer no advanced controls.
NETGEAR 8 Port PoE Gigabit Ethernet Easy Smart Managed Essentials Switch (GS308EP)
The NETGEAR GS308EP is an 8-port Gigabit PoE+ (8 PoE+ ports) smart managed switch designed to power devices like IP cameras, VoIP phones, and wireless access points with a 62W total PoE budget. Buyers highlight plug-and-play simplicity, stable performance over months, and a compact desktop or wall-mount form factor, with the main tradeoff being limited “advanced” controls compared with more feature-heavy managed switches.
Ubiquiti UniFi Switch (USW-Lite-16-PoE, 16 Gigabit Ethernet Ports, 8 PoE+ Ports, Wall Mounted)
The Ubiquiti UniFi Switch USW-Lite-16-PoE is a fully managed, Layer 2 gigabit switch built for UniFi controller setups. It includes eight PoE+ ports for powering devices like access points and cameras, with an overall PoE power cap that matters if you plan to run power-hungry gear.