RAM MOUNTS Swivel Double Socket Arm, B Size 1" Ball (RAP-B-200-2U)
Quick take
This RAM double socket swivel arm upgrades a RAM ball-and-socket setup by adding more positioning freedom, with 360° center rotation and a 180° swivel joint. It is a good fit for mounting phones, GPS units, or cameras on a vehicle or dash when you want fine-tuning instead of a single pivot. The biggest practical caveat is that longer, heavier configurations can increase vibration, and this arm is composite rather than metal.
Pros and cons
Pros
- 360° center rotation plus a 180° swivel joint for flexible device positioning
- Designed for RAM B-size 1" ball components, so it integrates with a wider system
- Near-infinite adjustability using double ball and socket technology
- Holds up to 2 lb for standard use (1 lb heavy-duty use)
Cons
- Composite construction, some buyers would prefer metal for reassurance
- Not always as rigid as expected when installed on a dash, movement can transfer to the device
- Extra arm length can increase vibration on phones depending on your setup
What buyers think
Buyer feedback centers on adjustability and holding power. Many reports highlight that separate controls for the swivel points make it easier to dial in the exact angle compared with simpler single-arm designs. Build quality is broadly viewed as strong for the job, even though the arm is not metal, with a recurring theme that the composite feels sturdier than expected. The most consistent limitation mentioned is stability under real-world driving, where a longer heavier configuration can allow noticeable bounce or vibration at the mounted device.
What this arm is for
The RAP-B-200-2U is not a complete phone or GPS mount by itself. It is an articulating “bridge” piece that connects to other RAM B-size 1" ball components (for example, a mounting base and a device holder). If you already have a RAM mount system and you feel your current arm or angle options are limiting, this double socket arm adds additional rotation points so you can place the device more precisely.
Key specs that affect real use
- Adjustability: 360° rotation at the center pivot, plus a 180° swivel joint for changing the overall viewing angle.
- Compatibility: B size (1") ball system components. The arm attaches to any B-size RAM ball components, including bases and device holders.
- Size: Overall length is 6.25" (socket-to-socket length 5.5").
- Weight capacity: Standard use rating is 2 lb, heavy-duty use rating is 1 lb.
- Material: High-strength composite (composite “instead of metal” is a common discussion point in reviews).
- Weather resistance: Not rated as water resistant.
Pros and cons for different setups
Best for
- Dash and vehicle mounting with a RAM system: You want more angles than a short, single-control arm provides.
- Phones, GPS, and cameras: When you need flexible positioning for visibility and safer viewing.
- Buyers who value precise adjustments: Dual swivel control points make it easier to fine-tune placement.
Who should be careful
- Anyone mounting a heavier device or using a long configuration: Extra length can transmit vibration, which some reviews describe as noticeable on phones.
- Buyers expecting a rigid, “no movement” feel: The arm can function well and still allow some bounce depending on how the rest of your mount is secured.
- Outdoor, wet conditions: This arm is not listed as water resistant, so protection may be needed in rain or exposed environments.
Is it worth it?
If you already own compatible RAM B-size (1") ball components and you want more positioning capability, the RAP-B-200-2U is the kind of accessory that can meaningfully improve how your device sits. It is especially appealing when you are replacing a simpler arm that feels limiting because you have more rotation points to dial in the angle. The decision comes down to your tolerance for setup tradeoffs: because it is a longer composite arm in a multi-joint configuration, some buyers report increased vibration or less rigidity than they would like, especially when the mounted device is on the end of the longer setup.
Price and availability
Pricing can change, so check the current listing details before you buy. Use the button below to view the latest price on Amazon.
Alternatives to consider
Without naming specific brands, here are the main “apples to apples” comparison categories shoppers typically weigh with RAM-style mounts:
- Shorter or single-joint arms: Better if your priority is rigidity and minimizing vibration, though you may lose some fine-tuning options.
- Different ball sizes (C or D): Choose this only if you are committed to B-size (1") components. If your system uses other sizes, compatibility is the first decision point.
- More compact mounting solutions: If your device needs a stable, low-movement setup, you may prefer fewer joints or a configuration with less cantilever length.
FAQ
How do I know this is compatible with my current RAM mount?
This arm is made for RAM B-size (1") ball components. As long as your base and your device holder both use B-size 1" RAM balls, it should integrate with your existing system.
What is the adjustability range on the RAP-B-200-2U?
It provides 360° rotation at the center pivot and a 180° swivel joint, letting you change both rotation and the overall viewing angle.
How much weight can it hold?
It is rated for standard use up to 2 lb and heavy-duty use up to 1 lb. For best results, consider the weight of the device plus any added accessories and be conservative if you want maximum stability.
Is this arm metal or composite?
It is a high-strength composite arm. Some buyers would prefer metal, but feedback generally indicates the build feels solid for its purpose.
Will it work for outdoor or wet environments?
It is not listed as water resistant. If your mount will see rain or heavy exposure, plan on additional protection and consider your vehicle’s exposure level.
Does the longer arm increase vibration?
Extra length can increase motion transfer to the mounted device depending on your vehicle surface, mounting base, and how your system is tightened. Some reviews specifically mention that longer configurations can make phone vibration more noticeable.
Specifications
| Product Title | RAM MOUNTS Swivel Double Socket Arm, B Size 1" Ball Articulating Mount with 360° Rotation and 180° Ratchet Joint for Phone, GPS & Camera Mounts RAP-B-200-2U |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | RAM MOUNTS |
| Manufacturer | RAM Mounts |
| Model Name | RAP-B-200-2U |
| Model Number | RAPB2002U |
| Color | Black |
| Item Weight | 0.4 Pounds |
| Compatible Devices | Portable Electronic Devices |
| Compatible Phone Models | 1 |
| Mounting Type | Vehichle Mount |
| Additional Features | Overall Length: 6.25", Socket-to-Socket Length: 5.5" |
| Weight Capacity Maximum | 2 Pounds |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Automobile, Motorcycle, Bicycle, Truck, ATV, Golf Cart |
| Item Dimensions | 9 x 3 x 1 inches |
| Arm Length | 5.5 Inches |
| Enclosure Material | High strength composite |
| UPC | 886172052913 190283707588 793442938771 793442936982 |
| Global Trade Identification Number | 00793442938771 |
| Mfr Part Number | RAPB2002U |
| Warranty Description | Manufacturer Warranty |
| Built-In Media | Auto part, Automotive Accessories, Replacement and Performance parts |
| Item Type Name | Mount Double Socket Swivel Arm |
Recommended next
WINDFRD Aluminum Fish Finder Mount with 1.5" / C Size Ball (Marine Medium Arm)
A saltwater-ready aluminum fish finder mount designed for C-size (1.5") ball systems, with a double-socket arm and a universal mounting plate. Strong, adjustable, and praised for staying stable in choppy conditions, but you need to confirm your unit’s screw pattern and that the 1.5" ball size is the right fit for your setup.
Bracketron NavMat Portable GPS Dash Pad Converts Windshield GPS Mount
The Bracketron NavMat is a portable, weighted friction dash pad that lets you turn a windshield-style suction mount into a dashboard mount. It’s a good fit for drivers who want a stable, non-slip base on textured dashboards and want something easy to move between vehicles, with the tradeoff that it is not water-resistant and won’t suit everyone’s dashboard surface.
Thinkware GPS Antenna for X1000/X700, F200 PRO/FA200, ARC
A simple windshield-mount GPS antenna made for Thinkware dash cams that support ARC logging. It’s designed to add time, speed, and location context to your recordings, with an easy install and a built-in 10-inch cable. Main caveat: it only makes sense if you have a compatible Thinkware model that uses ARC GPS logging.
Garmin Varia Radar Seat Rail Mount
The Garmin Varia Radar Seat Rail Mount is an optional kit that lets you attach a compatible Varia rearview radar under your saddle on standard 7 mm round alloy seat rails. It tidies up the look and can feel more secure than lower-cost rail mounts, but you will want to double-check rail type and whether the mount clears your saddle bag. View latest price on Amazon.