PLDHPRO Tablet Holder for Mic Stand 360° Swivel iPad Music Stand Mount
Quick take
The PLDHPRO clamp-on tablet holder is designed for performers who need a stable place for a tablet on a mic stand, music stand, or similar pole. It supports 5.5–14.6-inch devices and offers multi-joint, 360° positioning so you can dial in an easy viewing angle. The main buying caveat is fit, particularly for very small devices under 7.9 inches and for mounting poles outside its 0.78–1.6 inch width range.
Pros and cons
Pros
- Wide device support (5.5–14.6 inches), including many iPad and Android tablet sizes
- Clamp mounts to common performance poles, with a stated pole-width range of 0.78–1.6 inches
- 360° adjustability using three adjustable joints for quick angle changes
- Portable, tool-free snap-together design made from ABS plastic
Cons
- Smaller devices under 7.9 inches are noted to stick to vertical orientation
- No water-resistance rating, so it is not aimed at wet outdoor use
- Build materials are plastic, so it is best treated as a stage/accessory mount rather than a heavy-duty permanent rig
What buyers think
Buyer-review evidence highlights a consistent theme: the mount feels stable when clamped to tubing and does not tend to loosen during active use. Users also praise the adjustability, describing fast repositioning and good control over viewing angles. Several buyers mention compatibility with their tablets and everyday performance use, and they call out the value-for-money aspect as well. That said, the overall review detail provided here is limited, so broader performance conclusions (for example, long-term wear under constant gig conditions) are harder to prove from the available excerpts.
Who this tablet holder is for
- Musicians and singers who want quick access to lyrics, chords, setlists, or backing tracks during rehearsals and gigs.
- Presenters using digital notes on a mic stand or similar pole at meetings, talks, or worship services.
- Home studio users who frequently reposition their tablet between practice apps and recording workflows.
Who should look elsewhere
- You need a mount for a device outside 5.5–14.6 inches. This holder is targeted to that range, and very small devices have an orientation limitation.
- Your pole width is outside 0.78–1.6 inches. The clamp range matters for fit on booms, cymbal stands, and music stands.
- You need a water-resistant outdoor solution. There is no water-resistance rating, so it is not positioned for rain or splash-heavy conditions.
Design and adjustability: how positioning works
This mount combines a clamp for attaching to a pole with a tablet arm that uses three adjustable joints. The result is a multi-direction setup that makes it easier to keep the screen in your line of sight, whether you are using the tablet in portrait or landscape. For practice and live use, the biggest practical benefit is that you can fine-tune the angle quickly rather than rebuilding the setup each time.
Compatibility and fit details that matter
- Tablet/screen size: Designed for 5.5–14.6-inch devices, covering many iPads and Android tablets.
- Mounting pole width: Clips to poles from 0.78 to 1.6 inches wide, which covers many mic stands, music stands, booms, and similar hardware.
- Orientation note for smaller devices: Devices under 7.9 inches are noted to stick to vertical mode.
Setup and everyday usability
The holder is made from lightweight ABS plastic and is intended to snap together or apart without tools. That is useful if you switch between home, rehearsal, and live venues, or if you like to keep your gear packed and ready. In daily use, buyers tend to focus on how securely the clamp grips and whether it stays put while adjusting the tablet.
Pros and cons, summarized
- Best for: stage and studio setups where you want a clamp-on tablet position on a mic stand or music stand, with quick angle control.
- Main tradeoffs: orientation limitation for smaller devices and a clamp fit range that depends on your pole thickness, plus no water-resistance rating.
Verdict
If your tablet falls within 5.5–14.6 inches and your mounting hardware is within 0.78–1.6 inches, the PLDHPRO tablet holder looks like a practical choice for performers and presenters who want stable clamping and fast 360° positioning. It is especially appealing when you care about keeping the tablet where you set it, with enough adjustability to match your viewing angle. Just be mindful of device size and pole width, since those are the two most likely reasons it would not fit your setup.
FAQ
What tablet sizes does this mount support?
It is designed for devices from 5.5 to 14.6 inches. Very small devices under 7.9 inches are noted to stick to vertical orientation.
Will it fit my mic stand or music stand?
The clamp range is stated for poles that are 0.78 to 1.6 inches wide. If your stand fits within that width, it should be compatible.
Does it rotate fully for landscape and portrait?
Yes, it includes three 360° adjustable joints, allowing you to change the viewing angle. Portrait is generally part of the intended use, though devices under 7.9 inches are noted to remain vertical.
Is it suitable for outdoor gigs or wet weather?
There is no water-resistance rating. If you expect rain or heavy outdoor exposure, you will likely want a more weather-protected solution.
Specifications
| Product Title | PLDHPRO Tablet Holder for Mic Stand 360° Swivel iPad Music Stand Mount for Microphone with Clamp, Musicians Stage Portable Stands Guitar Tripod Accessories Compatible 5.5-14.6'' Devices |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Stands |
| Brand | PLDHPRO |
| Manufacturer | PLDHPRO |
| Model Name | iPad music stand holder DC04-P5 |
| Model Number | DC04-P5 |
| Color | Black |
| Compatible Devices | This phone holder mic stand is compatible with iPad Pro 12.9/11/10.5/9.7, iPad Air 10.9/10.5/9.7, iPad Mini 2/3/4/5/6, iPad, Galaxy Tab S9/S/S8/S7/A/E/S24 series, Samsung Galaxy Z Fold/Flip series, Fire HD, Surface Pro/Go series, Android tablets, etc. |
| Compatible Phone Models | This tablet mount clamp is compatible with iPhone 17/16/15/14, Moto X, and other phones over 5.5 inches. |
| Mounting Type | Clamp |
| Additional Features | Rotatable |
| Water Resistance Level | Not Water Resistant |
| Enclosure Material | Plastic |
| Mfr Part Number | DC04-P5 |
| Warranty Description | 12 months |
| Built-In Media | 1 x tablet holder + 1 x arm with clamp + 1 x manual |
Available variants
Size
- 2 stage, longer arm
- 1 stage
- 2 stage
Recommended next
Lamicall Kindle Stand Tablet Holder - 55" Height Adjustable, Flexible Arm, Heavy Base Tablet Mount
The Lamicall floor tablet stand is designed for hands-free reading, video calls, and watching on a stable, height-adjustable base. With a highly adjustable multi-joint arm and a 360° swivel head, it can fit most 4.7 to 13 inch tablets and many phones, but it is best for users who want a permanent floor setup rather than a compact travel mount.
CreaDream Tablet Pillow Stand, Foldable Tablet Holder for Lap, Bed and Desk
The CreaDream Tablet Pillow Stand is a foldable, adjustable tablet holder that lets you use your device on your lap or on a bed, couch, or desk. It uses Velcro to change viewing angles and includes a plush storage pocket plus a side stylus mount, but it is best for comfortable, non-rigid setups rather than strict desk-work stability.
SteelStorm Tablet Floor Stand (360-Degree Rotatable, Adjustable Height and Angle)
A heavy, metal floor tablet stand designed for hands-free viewing with 360-degree rotation and adjustable height and angle. Best for shared-use spaces like bedrooms, kitchens, offices, and home gyms, as well as quick switches between portrait and landscape. The main caveat is that the device fit depends on screen size (4.7 to 12.9 inches) and device width/thickness limits, and some phones may be harder to lift out if you prefer a more “grabby” holder lip.
Jakeko Portable Monitor Stand Large Clamp
The Jakeko Portable Monitor Stand Large Clamp is a heavy-duty, foldable aluminum desk clamp stand designed for portable monitors, tablets, and many iPad and Galaxy models. It prioritizes stability (up to 4.4 lb support) and 360-degree rotation for quick portrait or landscape viewing, with a built-in tension adjustment tool. Main caveat: iPad compatibility may require using a magnetic/copper disk approach rather than simple direct mounting with some cases.