Phone Slim Kickstand, Ultra Thin Vertical and Horizontal 360° Rotating Universal Steel Metal Stable Stand Pocket Friendly Sticky Holder for iPhone Samsung Cellphone Case (Black 2-Pack)
Quick take
This ultra-thin kickstand is made to stay nearly invisible on the back of a phone case while converting quickly into a stable portrait or landscape viewing stand. Buyers like the low profile and the simple 360° rotation, but adhesive placement matters, and some users find the included sticky setup needs extra help depending on the phone and case surface.
Pros and cons
Pros
- Ultra-thin, minimalist design intended to add little bulk to a phone case.
- 360° rotation for switching between portrait (e.g., calls, Zoom) and landscape (e.g., video).
- Stability-focused build, using metal construction and an anti-slip style base.
- Comes as a 2-pack, useful if you want one spare or want to outfit two phones.
Cons
- Adhesive strength depends on placement accuracy and surface compatibility, and positioning affects how stable portrait angles feel.
- Some users report it did not hold well on their specific phone surface and used an extra adhesive method.
- Not an ideal choice if you want a removable, non-sticky solution.
What buyers think
Buyer-review evidence is limited but consistent on a few key points. Several people describe the stand as thin, minimal, and effective without adding much bulk, and many highlight that it rotates smoothly between portrait and landscape. Adhesion is the main theme, with multiple comments praising strong stickiness when positioned correctly, plus some users noting it did not hold as well on their particular phone or case surface. A small number of reviews also point out that where you place it (toward the bottom) can impact the stability of portrait mode.
How this kickstand works for everyday use
This is a case-friendly kickstand designed to be installed with adhesive, positioned about 10 mm from the bottom of the phone or case. Once attached, it folds into a low-profile position and unfolds into a viewing stand. The stand rotates to let you choose portrait or landscape angles for different activities like video watching or video calls.
Design and build: slim, metal, and made to resist wobble
The stand uses metal construction (stainless steel is referenced) and a widened base intended to improve stability. Reviewers frequently describe it as sturdy and not overly bulky, which matters if you plan to keep it on your phone for day-to-day use. The anti-slip pads and “no wobble” intent show up in the overall design, especially for setups like holding your phone on a desk or in a kitchen counter area.
Rotation and locking behavior
For viewing flexibility, the kickstand supports 360° rotation and includes a 4-angle locking concept intended to prevent slippage. In practice, this is the feature buyers most often mention when they describe using the stand for portrait versus landscape without needing to reposition the device manually.
Adhesive and installation tips that affect stability
Adhesion is the make-or-break factor for this style of kickstand. Reviews suggest the installer should take placement seriously, because accurate positioning can affect both hold strength and the angle stability in portrait mode. A recurring theme is to preview positioning before committing to the adhesive. If your case has a slick, textured, or unusual finish, the mounting surface may behave differently than expected.
Buyer tip: If you want portrait mode to feel less “tippy,” consider placing it lower rather than closer to the middle of the device, since some users reported improved stability when installed toward the bottom of the phone or case.
Who it’s best for
- You use your phone in short desktop or countertop sessions and want an unobtrusive stand without a bulky built-in kickstand case.
- You watch videos or attend calls and want quick switching between landscape and portrait orientation.
- You prefer metal, minimal stands that stay pocket-friendly and do not require frequent setup.
- You want a 2-pack for two phones or as a spare.
Who should skip it
- You need a stand that can be removed and reattached often without leaving adhesion behind.
- You are unsure about whether your specific case surface will bond well with adhesive, especially if your case has a very slick coating or a highly textured back.
- You want guaranteed strong hold regardless of placement. This product’s performance is closely tied to correct installation.
Price and availability
The package is available as a 2-pack and is listed at a low entry price point, which makes it appealing if you are replacing a bulky stand or adding a stand to a case that did not originally include one. For the most current cost and availability, check the live listing.
Verdict
If you want a very slim, metal kickstand that stays out of the way but still supports both portrait and landscape viewing, this 360° rotating option is a solid pick. The biggest caution is adhesive fit: take placement seriously, and be prepared that certain cases or phone backs may not bond as expected.
FAQs
Will this kickstand stick to a phone case or only to the phone itself?
It is designed to bond to the back surface with pre-attached adhesive. Some users apply it to their phone case successfully, but adhesion can vary depending on the material and finish of your specific case or phone back.
How does placement affect portrait versus landscape stability?
Placement matters. Reviewers note that installing it closer to the bottom can help portrait mode feel more stable, while placing it too high on the device can lead to less reliable angles.
Does the stand rotate fully, or is it limited to preset angles?
It rotates for both portrait and landscape viewing, with a locking concept intended to hold positions and reduce slippage during use.
Is this for one phone only, or can I outfit multiple devices?
It comes as a 2-pack, so you can use one for your main phone and one as a spare, or outfit two different phones.
Is it meant for desk and travel use?
Yes, the design is meant for stable hands-free viewing in everyday scenarios like desks and other surfaces, while staying thin enough for pocket carry.
Specifications
| Product Title | Phone Slim Kickstand, Ultra Thin Vertical and Horizontal 360° Rotating Universal Steel Metal Stable Stand Pocket Friendly Sticky Holder for iPhone Samsung Cellphone Case (Black 2-Pack) |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Stands |
| Brand | Stinfy |
| Manufacturer | Stinfy |
| Model Name | Portable Phone Stand |
| Model Number | PKS01-2 |
| Color | Black |
| Form Factor | Foldable |
| Compatible Devices | Mobile Phones, Smartphones, Tablets |
| Compatible Phone Models | Iphone, Samsung, Universal |
| Mounting Type | Desktop |
| Other Special Features of the Product | 360 Degree Rotation, Pocket Friendly, Portable, Slim Profile |
| Antenna Location | Desktop Mount, Phone Stand, Video Viewing |
| Adjustable Length | No |
| Fastening Type | Foldable |
| Theme | Minimalist, Modern |
| Style Name | Modern |
| Item Dimensions | 2.7 x 1 x 0.1 inches |
| Unit Count | 2.0 Count |
| Number of Items | 2 |
| Mfr Part Number | PKS01-2 |
| Built-In Media | Phone Stand |
| Warranty Description | 2 Year |
| Age Range Description | Adult |
| Enclosure Material | Alloy Steel, Metal |
| Finish | Metallic |
Available variants
Size
- 1-Pack
- 2-Pack
Color
- White
- Sliver
- Black
Recommended next
TESLYAR Wood Phone Docking Station for Men (Earth Beige)
The TESLYAR wood phone docking station is a tabletop organizer that combines a smartphone stand with compartments for everyday carry items like keys, wallet, glasses, and a watch. It’s designed to look natural on a nightstand or desk, with solid wood construction and a polished finish, plus an easy assembly process. The main tradeoff: you’ll need to supply your own charging adapter and cable.
VEIYAILU Gifts for Men Boyfriend Dad Husband Him Wood Phone Docking Station Nightstand Organizer for Men (Walnut)
A solid-wood phone docking station and nightstand organizer designed to keep everyday essentials in one place. Reviewers highlight the clean walnut look, sturdy feel after assembly, and practical compartments, with the main caveat that you’ll need to assemble it and charge compatibility depends on your phone.
COOPER MagStand - iPhone Stand for Desk & Video Recording, Compatible with MagSafe, Stand for iPhone 17 Pro Max Plus, 16/15/14/13/12 (x2 Pack - Night Black)
The COOPER MagStand is a MagSafe-compatible iPhone desk stand with adjustable height, 360° rotation, and tilt for steadier video recording and hands-free viewing. Buyers highlight the strong magnetic hold, smooth adjustment that stays put, and a compact base that works for desk and kitchen counter use. The main caveat is fit, it is designed for iPhones and MagSafe-compatible cases rather than universal mounting.
Phone Stand for Desk, Cell Phone Holder Cute Smart Cellphone review
A foldable, portable desk phone stand in a sakura pink style that fits many phones and small tablets under 8 inches. It focuses on stability (weighted base and anti-slip grips) and protection (silicone pads), but the adjustment range is more limited for some users when the phone is upright.