(Not Plastic) 3Pack Outdoor Extension Cord Safety Cover,11.2x6 Inch,600D Canvas Oxford Cloth Waterproof Electrical Outlet Cover, with Velcro Closed,Weatherproof Plug Cable Connectors Protector
Quick take
ClawsCover’s 3-pack outdoor safety covers are built from thick 600D canvas cloth, designed to shield outdoor plug connections from rain, moisture, dirt, and UV exposure. They use a three-sided Velcro closure, aiming for an easier, more secure wrap than brittle plastic covers.
The main tradeoff is fit. At 11.2 x 6 inches, they can work well for many common connections, but you will want to check whether your specific plug and adapter size matches the cover dimensions.
Pros and cons
Pros
- Thick 600D canvas plus a waterproof, UV-resistant fabric coating for outdoor use.
- Three-sided Velcro closure intended to keep the cover sealed around the connection.
- Flexible fabric design that avoids the “plastic tabs break” issue some buyers associate with rigid covers.
- Indoor and outdoor versatility for things like holiday lighting and yard power connections.
Cons
- Not a one-size-fits-all solution, since the cover is sized (11.2 x 6 inches) to your plug and connector shape.
- Positioning matters, multiple buyers describe better results when the cover is kept flat and off the ground.
What buyers think
Buyer-review evidence is generally positive, with recurring themes around practicality and outdoor performance. Several buyers say the covers are easy to wrap and adjust for real-world plug connections, and that the fabric form factor helps them fit more naturally around cords compared with rigid plastic covers.
Users also mention that keeping the cover properly positioned (for example, laid flat and not allowing openings to sit where water can pool) improves how well it protects against wet weather. Review evidence also suggests these covers can be useful beyond extension cords, like protecting other outdoor or exposed connection points, but fit and use-case alignment still matter.
How these canvas cord covers work
These are designed to go over the connection end of an outdoor power setup. You place the plug and connector area into the safety seal portion, then close the cover using the three-sided Velcro. The product guidance emphasizes that if you hang it, the Velcro side should face down, which helps limit water getting into the sealed area.
Weather protection, without rigid plastic
A key differentiator here is material. Instead of a rigid plastic shell, the cover uses thick 600D canvas Oxford cloth, with claims of waterproof and UV-resistant performance. Buyers specifically call out that the fabric construction avoids cracking or breaking tabs that can happen with conventional plastic covers over time.
Size and fit considerations
Each cover is listed at 11.2 x 6 inches. That means you should confirm the overall fit of your plug, any adapter pieces, and how much “bulk” your connection creates. In practice, some shoppers note it can be “a bit smaller than expected,” which is a signal to measure first rather than assume every outdoor plug will fit comfortably.
It also helps to think about placement. Review evidence suggests these work best when you can keep the cover parallel to the ground and off the surface, reducing the chance of water pooling around the edges.
Pros and cons for different buyers
Best for
- Homeowners and renters who want a simple way to protect outdoor plug connections for seasonal lighting, yard tools, or cameras.
- People tired of brittle plastic covers that crack or break, especially in sun and foot-traffic areas.
- Buyers who are okay checking fit against their plug and connector dimensions before closing.
Who should avoid
- Anyone with very large or irregular connector shapes that may not fit the 11.2 x 6-inch cover area.
- Shoppers who need a “set it and forget it” rigid weatherproof box, because cloth covers still rely on proper positioning and sealing with Velcro.
Price and availability
The product is sold as a 3-pack and is available on the major US marketplace for a listed price point (the exact cost can vary over time). Check the current listing for the most up-to-date price and to confirm the pack size you want.
Verdict
Choose the ClawsCover 3-pack if you want outdoor protection for plug and connector areas using thick, flexible, UV-resistant canvas instead of rigid plastic. It appears especially attractive to buyers who have had plastic covers fail, and it can be a practical solution for many common outdoor setups. Just plan to verify fit, and position the cover in a way that keeps water from pooling around the sealed edge.
FAQ
How do you close the cover?
Place the connection inside the cover, then close the three-sided Velcro so the sealed area stays shut around the plug and cable connection.
Is it actually waterproof?
The cover is marketed as waterproof and UV-resistant. In use, reviewers describe better results when the cover is kept flat and off the ground, which helps minimize water pooling around the edges.
What are the cover dimensions?
Each cover is listed at 11.2 x 6 inches (28 x 15 cm).
Is this only for extension cords?
It’s intended for outdoor power connections, but the shape and closure also make it useful for other exposed connection areas, as long as the cover fits your specific plug or connector setup.
Will it work if I hang it?
The setup guidance emphasizes that if you hang it, position it so the Velcro side faces down, which helps limit water entry into the covered area.
Specifications
| Product Title | (Not Plastic) 3Pack Outdoor Extension Cord Safety Cover,11.2x6 Inch,600D Canvas Oxford Cloth Waterproof Electrical Outlet Cover, with Velcro Closed,Weatherproof Plug Cable Connectors Protector |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | ClawsCover |
| Manufacturer | ClawsCover |
| Model Number | outdoor outlet cover |
| Color | Black |
| Connector Gender | Male-to-Female |
| Plug Type | Type A or Type B |
| Power Cord Prong Count | 2 |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Special Features | Abrasion Resistant, Heavy Duty, Tear-Resistant, UV-Resistant, Waterproof |
| Has Extension Cord | No |
| Water Resistance Level | Waterproof |
| Item Length | 10 Inches |
| EU Spare Part Availability Duration | 5 Years |
| Unit Count | 3.0 Count |
| Mfr Part Number | CC-OECC-3 |
| Warranty Description | 1 YEAR WARRANTY |
| Built-In Media | Velcro |
| Plug Format | Type A or Type B |
Available variants
Size
- X-Large
- Medium
- Large
- Small
Recommended next
Cordinate 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Protect Cords, Prevent Cable Trips, Heavy Duty Cord Hider - Cable Cavity = 0.75" (W) x 0.43" (H) - Tan
The Cordinate 6ft floor cord cover is a low-profile PVC channel designed to route HDMI, power, and other cables safely across open floors without creating a trip hazard. It uses a split-channel design for easier cutting and includes double-sided tape for installation, but some buyers report the ends and tape may not hold as well in certain conditions (especially until the cover lays fully flat).
VIVO Under Desk Vertebrae Cable Management Kit, Adjustable Quad Entry
The VIVO Under Desk Vertebrae Cable Management Kit is a screw-in under-desk “snake” style organizer with adjustable height and a 4-way entry design. It’s designed to route multiple AV and power cords cleanly from desk to floor, especially helpful for sit-stand setups where cable movement matters.
JAHOMFAI Floor Cord Covers for Wires 10FT Cable Hider Wire Cover (Self-Adhesive, PVC)
JAHOMFAI floor cord covers are a self-adhesive PVC cable hider designed to keep low-profile wires in place, reduce tripping risk, and protect cables from damage in homes, offices, workshops, and classrooms. The main caveat is fit and color: the channel is small, and the finish may not match every floor tone perfectly.
D-Line 6ft Floor Cord Cover, Made in USA Linkable Cable Protector
A heavy-duty, low-profile floor cord cover designed to hide and protect extension cords in high-traffic areas. It features a linkable design (with connecting pins), a non-slip ribbed base, and a pre-split back for easier installation, with the main tradeoff being it may take time to fully lie flat after uncoiling.