Lengthen Saddlebag Locks Mounting Security Theft Deterrent For Harley Touring
Quick take
Lengthen Saddlebag Locks are stainless-steel replacement hardware meant to improve how secure Harley Touring saddlebags feel compared with common quarter-turn quick disconnect setups. Riders typically like the quick no-drill install and the “stays tight” fit, with a more theft-deterrent design. The main caveat is that proper mounting can depend on the included brackets, and you may want to double-check washers/gasket choices for your exact setup.
Pros and cons
Pros
- Made from stainless steel, built as durable replacement lock hardware.
- No drilling required, designed for installation in a few minutes.
- Replaces stock 1/4 turn saddlebag quick disconnects to improve security and fit.
- Uses included hardware for both saddlebags, aiming for tool-free re-attach once installed.
Cons
- Fitment can require the right supplied gasket and bracket, and some installs may call for extra washer help.
- This is a vehicle-specific Harley Touring fit, so compatibility needs to be verified before purchase.
What buyers think
Buyer-review evidence is generally positive, with a clear theme that these locks feel tighter and more secure than the factory quarter-turn style. Many comments focus on quick, straightforward installation and a good fit that helps prevent saddlebags from loosening over time. A smaller amount of feedback suggests setup may be slightly more involved than expected for some model years, including the need to use the provided brackets and consider additional washers to get the pressure and fit just right. Overall, the recurring pattern is improved security feel and tighter mounting, tempered by the fact that correct hardware selection matters.
How these saddlebag locks help with security
The core idea is straightforward: rather than relying on the easy-to-remove quarter-turn disconnect style, these locks are designed as a more secure replacement for Harley Touring saddlebags. The hardware is meant to discourage quick removal, and the stainless-steel build supports long-term durability for everyday rides.
Installation and day-to-day use
These are designed to install without drilling, using included hardware meant to replace the stock saddlebag quick disconnects. Reviews commonly mention getting them installed in minutes and achieving a snug, stable fit. Once installed, the design goal is tool-free re-attachment of your saddlebags.
One practical consideration: the kit includes different gasket material to adjust bolt length as needed, and not all gaskets may be required. This is especially relevant if your bike’s existing geometry makes small spacing changes noticeable.
Fitment notes for Harley Touring riders
The product is positioned for Harley Touring model ranges (1985 through 2020, depending on specific variants). Since saddlebag hardware can vary by year and trim, you should confirm your exact model and saddlebag style matches the kit’s intended setup. Pay extra attention to whether your installation uses the correct supplied brackets and gaskets for your bike’s mounting points.
Length and build details
- Material: stainless steel.
- Saddlebag lock length: 35 mm (about 1.378 inches).
- Mounting approach: replaces the stock saddlebag quick disconnects with lock hardware meant to sit flush without adding a bulky lever-style profile.
Pros and cons in plain terms
Who this is best for
- Harley Touring owners who want more secure saddlebag mounting than the common quarter-turn pin style.
- Riders who prefer a stainless-steel replacement and a relatively quick install.
- Anyone who wants saddlebags to feel tighter and less prone to looseness.
Who should look elsewhere
- Buyers who cannot confirm compatibility for their exact model year and saddlebag setup.
- People who expect a one-size-fits-all installation with no need to select the right gasket or potentially adjust washers.
Verdict
If your saddlebags currently use a quarter-turn quick disconnect that feels too easy to remove or tends to loosen, these stainless-steel Lengthen Saddlebag Locks are a practical upgrade. The review patterns point to a solid fit, improved snugness, and straightforward no-drill installation. Just make sure you select the correct supplied bracket and gasket, and be prepared for minor extra setup (like washer selection) if your mounting needs differ slightly.
FAQ
Do I need to drill anything to install these saddlebag locks?
No drilling is required. The install is intended to be completed in a few minutes using the supplied hardware.
Will these replace the stock 1/4 turn saddlebag quick disconnects?
Yes. They are designed to replace stock 1/4 turn saddlebag quick disconnects with lock hardware meant to be more secure.
Are they only for Harley Touring bikes?
They’re built for Harley Touring model ranges (1985 through 2020, depending on trim and variant). It’s important to verify compatibility with your exact bike year and saddlebags.
What hardware comes in the kit?
The kit includes hardware for both saddlebags, and it also includes different gasket material to help adjust bolt length. Not all gaskets may be needed for every installation.
Do I need tools to remove and re-attach the saddlebags after installation?
Once installed, the design goal is that no tools are required to remove and re-attach your saddlebags.
How long are the saddlebag locks?
The lock length is 35 mm (about 1.378 inches).
Specifications
| Product Title | Lengthen Saddlebag Locks Mounting Security Theft Deterrent For Harley Touring 1985-2020 Stainless Steel |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Alarms & Anti-Theft |
| Brand | Alpha Rider |
| Manufacturer | Motofans |
| Model Number | M19N1803-ARLH |
| Color | Black, Silver |
| Material | Stainless Steel |
| Size | Lengthen Stainless Steel |
| Compatible with Vehicle Type | Cruiser, Touring |
| Mounting Type | Rack Mount |
| Strap Type | Adjustable |
| Capacity | 30 Liters |
| Handle Type | Latch, Lever |
| Number of Compartments | 1 |
| Automotive Fit Type | Vehicle Specific Fit |
| Pattern | Solid |
| Style Name | Minimalist |
| Material Type | Stainless Steel |
| Shell Type | Hard |
| Brand Name | Alpha Rider |
| Manufacturer Part Number | M19N1803-ARLH |
| Vehicle Service Type | Cruiser, Touring |
Available variants
Size
- Lengthen Stainless Steel
Recommended next
Motorcycle Lock Combo - Helmet and Brake Anti-Theft Grip (SKYJDM, Red)
A compact key-lock combo designed to secure your front brake and clamp your helmet to the handlebar on motorcycles, bikes, ATVs, and scooters. It works best for riders whose handlebar diameter falls within 1.3–1.5 inches, and it can feel fiddly if your clearances or grip fit are slightly off.
Matework motorcycle lock anti theft heavy duty (handlebar and brake lock with helmet lock)
A heavy-duty keyed motorcycle brake and handlebar lock from Matework, built from CNC aluminum alloy and finished with anodizing for weather resistance. It includes a helmet lock, keys, and anti-scratch pads for the handlebar and brake area, with quick installation claimed by the brand. Buyer feedback highlights strong deterrence and a sturdy feel, with limited evidence on fit across all bikes.
ONVIAN Motorcycle Disc Brake Lock with 120dB Alarm, Rechargeable Waterproof (Black)
The ONVIAN disc brake lock is designed to deter theft with a loud alarm and a rechargeable, waterproof build. It is a straightforward anti-theft add-on for bikes with disc brakes, but one key tradeoff reported by buyers is that the alarm sensitivity may not trigger as easily as expected.
Black Hardbagger Security Theft Deterrent Saddlebag Locks Mounting Hardware Fit for Harley Touring 1994-2022 Replace 1/4 Turn Quick Disconnects
These saddlebag lock mounting hardware replacements swap out Harley Touring 1/4-turn quick disconnects to add a theft deterrent setup without drilling. Review evidence points to easier, quicker installation and good fit, with the main limitation being correct Harley Touring year/fitment matching and using the right adapters/gaskets for your setup.