Legrand - OnQ Cat 6 Network Interface Module (AC1068)
Quick take
The Legrand On-Q AC1068 is an 8-port Cat 6 network interface module built for On-Q structured wiring enclosures. It’s a good choice when you want a tidy, punchdown-and-RJ45 setup that brings multiple Ethernet runs together in one home networking location. The biggest buying caveat is wiring attention, several buyers highlight the module’s termination layout (T568A vs T568B) so you match it correctly to avoid mis-terminating ports.
Pros and cons
Pros
- 8 front-mounted 110-IDC punchdown terminals plus RJ45 jacks for organized Ethernet terminations.
- Designed to fit all On-Q structured wiring enclosures, making it a purpose-built closet/cabinet upgrade.
- Cat 6 connectivity aimed at gigabit home networking (up to 1 Gbps specified).
- UL listed and compliant with TIA/EIA 568-C.2 standards.
Cons
- Termination layout matters, buyers note you should use the correct A vs B scheme when wiring the punchdowns.
- Best fit if you already have (or plan to use) On-Q structured wiring enclosures, it is not positioned as a universal retrofit for other cabinet systems.
What buyers think
Buyer-review evidence for the On-Q AC1068 is generally positive, with recurring themes focused on usability and installation results. Shoppers commonly describe it as well made, a good way to clean up a home wiring closet, and “fits perfectly” when used in an On-Q cabinet. Multiple reviews also emphasize that terminating ports is straightforward, but they consistently advise paying attention to the specific termination layout when punching down to the terminals.
What this module does in a home network
This is an 8-port network interface module that helps connect Ethernet runs from around the house back to your router or switch. Instead of leaving cables loose or relying on ad-hoc connections, the AC1068 provides a centralized termination point using front-facing punchdown terminals and RJ45 connectors. That makes it well suited for connecting devices like computers, TVs, gaming systems, and network streaming gear to your wired home network.
Design and key specs to know
- Port count: 8 data ports for Cat 6 (or Cat 5e) Ethernet lines.
- Termination approach: front-mounted 110-IDC punchdown terminals paired with RJ45 jacks.
- Speed capability: supports gigabit networking (1 Gigabits Per Second specified).
- Standards and safety: UL listed and compliant with TIA/EIA 568-C.2.
- Size: approximately 1.5 in (L) x 2.9 in (W) x 6.41 in (H).
Installation notes that affect real-world success
The AC1068 is built for a structured wiring workflow, but it still requires careful termination. Buyers call out an important practical detail: the module’s punchdown layout is set up for a particular wiring scheme (often discussed as T568A vs T568B), so you need to terminate your cables and your corresponding ends consistently. If you wire one end differently than the other, you can end up with ports that don’t behave as expected.
Best for and who should avoid it
Best for
- Homeowners or installers building (or repairing) a structured wiring closet who want an organized Ethernet termination point.
- Anyone using (or planning to use) On-Q structured wiring enclosures and wants the matching Cat 6 interface module.
- Users who prefer a punchdown-based setup that still results in clean RJ45 connection points.
Who should avoid it
- Buyers who need a fully universal network module for non-On-Q enclosures.
- Anyone unwilling to do precise cable terminations and ensure consistent A vs B wiring across both ends.
Legrand pros and cons summary
If your goal is to centralize multiple Ethernet drops neatly inside an On-Q wiring cabinet, the AC1068 focuses on doing that with front-mounted punchdowns and RJ45 jacks. The main tradeoff is that success depends on correct termination scheme alignment, so it is best for buyers who are comfortable with structured wiring or follow a wiring plan carefully.
Alternatives to consider
If you are comparing options, think in terms of enclosure compatibility and termination style. Alternatives to this type of module usually fall into categories like:
- Other On-Q-compatible interface modules: choose a different Cat rating or port count if it better matches your cable runs and planned device mix.
- Non-On-Q punchdown patch solutions: consider these if you cannot use On-Q enclosures, but check space, mounting fit, and whether they support the punchdown-to-RJ45 workflow you want.
- Pre-terminated structured wiring panels: these can reduce on-site punchdown work, but may cost more and can be less flexible if you need to rework runs later.
Verdict
The Legrand On-Q AC1068 is a strong fit for structured home networking builds that use On-Q enclosures. Buyers tend to like the tidy installation and proper fit, and the module’s UL/TIA positioning supports confidence in the intended Ethernet cabling standards. Just treat termination layout (A vs B) as a must-check step, because that detail is where install quality is won or lost.
FAQs
How many Ethernet ports are on the AC1068?
The AC1068 provides 8 Ethernet connectivity ports.
Does it support Cat 6 and Cat 5e cables?
Yes, it’s designed to work with up to 8 Cat 6 or Cat 5e data lines.
Is this module compatible with all wiring cabinets?
It is designed to fit On-Q structured wiring enclosures, so cabinet compatibility is a key consideration.
What’s the main installation caution buyers mention?
Buyers commonly highlight that the termination layout is set for a specific A vs B scheme, so you should match your wiring and the other cable end consistently.
What kind of devices can I connect through it?
It’s intended for connecting Ethernet-enabled devices such as computers, TVs, gaming systems, and network streaming devices.
Specifications
| Product Title | Legrand - OnQ Cat 6 Network Interface Module - Compatible with All OnQ Enclosures - 8-Port Ethernet Connectivity for Home Networks, UL Listed (AC1068) |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Hubs |
| Brand | On-Q |
| Manufacturer | Legrand On-Q |
| Model Number | AC1068 |
| Product Dimensions | 1.5"L x 2.9"W x 6.41"H |
| Color | Cat 6 |
| Hardware Interface | Ethernet |
| Compatible Devices | Computers, TVs, gaming systems, network streaming devices |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 1 Gigabits Per Second |
| Item Dimensions L x W x H | 1.5"L x 2.9"W x 6.41"H |
| UPC | 804428432692 |
| Global Trade Identification Number | 00804428432692 |
| Mfr Part Number | AC1068 |
| Built-In Media | Network interface module |
| Item Type Name | 8-Port Cat 6 Network Interface Module |
| Number of Items | 1 |
Available variants
Size
- 8 Port
Style
- Cat5e
- Cat6
Recommended next
j5create 7-Port Powered USB 3.0 Data Hub with 3.3 ft Extended Cable (JUH377)
The j5create JUH377 adds seven USB 3.0 ports to a laptop or MacBook using a single USB plug, and includes a 20W power adapter for devices that need more than bus power. It is a good fit for everyday peripherals, plus one fast-charging port for phones and tablets, but it is not designed to fully power multiple power-hungry external drives at once.
Cooler Master ARGB & PWM HUB 1 to 6 Port
The Cooler Master ARGB & PWM HUB 1 to 6 Port is a compact way to run multiple PWM fan power connections and multiple 3-pin addressable RGB (ARGB) control channels from fewer motherboard headers. It uses SATA power and includes a built-in magnet for cleaner case mounting, but fitment can require careful attention to header spacing, and it may not deliver the same per-fan lighting effects for every fan brand or ecosystem.
TOTU 11-in-1 USB-C Hub: 4K HDMI, VGA, 2x USB3.0, 2x USB2.0, Ethernet, SD Card Reader, Audio, 3.0 PD, Mac Pro & Laptops Compatible
The TOTU 11-in-1 USB-C hub is a compact all-in-one dock that adds HDMI and VGA video, gigabit Ethernet, dual card slots, audio, and multiple USB ports, plus USB-C PD pass-through charging up to 87W. It’s a strong fit for travelers and laptop owners who want one adapter for monitors, wired internet, and everyday accessories, with the main caveat that dual HDMI+VGA output duplicates rather than extends.
MokerLink 26 Port Gigabit PoE Switch, 24 Gigabit PoE+ Ports, 2 Gigabit SFP Uplink
A fanless, 1U rackmount unmanaged PoE+ switch with 24 gigabit PoE+ ports and two gigabit SFP uplinks, designed for plug-and-play camera and access point deployments. It offers a strong 300W total PoE budget (802.3af/at) plus simplified features like port-based VLAN and an “extend” mode for longer runs at reduced speed, with a key limitation: it does not power 24V passive PoE devices.