iMC Motorcom HS-H110P Full-Face Helmet Headset for 7 Pin Harley Davidson Audio Systems
Quick take
The iMC Motorcom HS-H110P is a wired full-face helmet headset built to plug into Harley Davidson 7-pin audio systems from 1998 onward. It uses a noise-cancelling microphone and flat panel speakers in durable metal casings, and many buyers say it links easily and delivers clear comms for touring. The main caveat is comfort for long sessions, since the headset is not adjustable and pressure points can build up after about an hour for some riders.
Pros and cons
Pros
- Designed for direct compatibility with Harley 7-pin audio systems (1998 to present).
- Noise-cancelling mic aims to reduce ambient noise for clearer communication.
- Flat panel speakers with metal casings for dependable in-helmet audio.
- Reviews frequently mention easy connection to the factory comm system.
Cons
- Comfort can be an issue on long rides because the headset is not adjustable.
- Mic clarity can depend on proper setup, including microphone position and sensitivity settings.
- Wind noise and occasional echo issues may show up at highway speeds for some riders.
What buyers think
Buyer-review evidence is fairly consistent around setup and performance for Harley touring. Many riders report that the HS-H110P integrates well with their factory intercom and controls, with sound quality that holds up for everyday riding and long trips. Several mentions also point to good road-noise reduction compared with in-helmet alternatives, especially when the microphone is positioned correctly. At the same time, review evidence includes a recurring comfort tradeoff, where riders can feel pressure after extended wear since the headset is not adjustable. There is also limited but relevant feedback that mic behavior (wind noise, whether others can hear you clearly) can improve after adjusting microphone sensitivity and ensuring correct alignment of the plug.
Designed for Harley 7-pin audio systems, not generic Bluetooth
Unlike many consumer Bluetooth headsets, the HS-H110P is built to work through Harley Davidson’s 7-pin audio interface. That means it is a strong fit if you already have a Harley comm and music setup that uses the 7-pin connector, including Ultra models and other compatible systems within the stated 1998 to present range. If you are looking for a standalone wireless intercom, or you do not have that 7-pin setup, you will likely need a different category of headset.
Sound and communication: what matters for touring
The headset uses a noise-cancelling microphone intended to cut down ambient noise, which is especially relevant for highway riding. Reviews commonly mention that intercom communication stays workable up to and around typical cruising speeds, but some riders note wind noise can become noticeable at higher speeds. A few buyers also describe that tuning the microphone sensitivity and keeping the mic close to the correct position helps improve what others hear. In practical terms, this headset rewards careful installation and mic placement.
Speakers and riding comfort
For audio, you get flat panel speakers with metal casings. Buyers often describe the audio as clear enough for music and comms while on rides, and several highlight that the speaker style helps reduce road noise. Comfort is where opinions split more. Some riders report that the headset can create pressure behind the ears after about an hour because the plastic design does not flex and the headset is not adjustable. If you typically ride for short stretches, that may be manageable, but if you regularly tour for long durations, consider whether you can tolerate non-adjustable pressure points or plan for minor fitting changes.
Setup and fit for full-face helmets
As a full-face helmet headset, the HS-H110P is intended to install into compatible helmet setups with minimal modification effort. It also uses a rugged connecting cable, with modular capability that lets you disconnect from the audio system without taking the helmet off. Reviews suggest installation is straightforward, but proper pin alignment matters. If the connection is not lined up correctly, you may end up with missed audio or communication issues until you reseat the plug.
Pros and cons summary
- Best for: Harley riders with factory 7-pin audio systems who want a helmet-integrated, wired headset for intercom and music.
- Good if you value: clear mic communication with noise reduction and durable, flat panel speaker hardware.
- Watch-outs: non-adjustable comfort for long wear, and potential wind noise or reduced mic clarity if sensitivity or mic positioning is off.
- Not ideal for: riders without Harley 7-pin audio compatibility, or shoppers who want a fully standalone Bluetooth intercom experience.
Verdict
The iMC Motorcom HS-H110P is a practical pick for Harley owners who already run the factory 7-pin audio system and want clean, in-helmet intercom communication without switching helmet audio ecosystems. It tends to work well when properly connected and mic-tuned, but comfort for extended wear is the biggest buying caveat. If your rides are typically shorter or you know you tolerate this kind of non-adjustable headset pressure, it can be a straightforward upgrade. If you frequently tour for many hours, prioritize comfort and plan for fitting adjustments before committing.
FAQ
Is the iMC Motorcom HS-H110P compatible with any Harley?
It is built for Harley Davidson 7-pin audio systems, designed to work with systems from 1998 through the present. If your bike uses a different audio interface, you may need a different headset model.
Will it work with full-face helmets only?
The HS-H110P is designed for full-face helmet use. It is part of a headset line with options for different helmet types, so make sure you match the correct model to your helmet style.
Does it include a noise-cancelling microphone?
Yes. The HS-H110P uses a noise-cancelling microphone intended to reduce ambient noise for clearer communication while riding.
Is it adjustable for comfort?
The headset is described as non-adjustable, and some riders report pressure points after about an hour of use. If long-duration comfort is a top priority, consider whether this fit style works for you.
Why do some riders report wind noise at high speeds?
Wind noise can become more noticeable at highway speeds if the microphone position and sensitivity are not dialed in. Careful installation and correct microphone placement are key to maintaining clarity.
What should I do if the connection does not seem to work correctly?
Make sure the plug is aligned and seated properly in the 7-pin connector. Incorrect alignment can lead to missing audio or communication until the connection is corrected.
Frequently asked questions
Specifications
| Product Title | iMC Motorcom HS-H110P Full-Face Helmet Headset for 7 Pin Harley Davidson Audio Systems |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Audio & Video Accessories > Bluetooth Headsets |
| Manufacturer | IMCMA |
| Product Warranty | For warranty information about this product, please click here |
Available variants
Style
- Half-helmet and Helmetless
- Open-face Helmet
Recommended next
MAXTO Motorcycle Helmet Bluetooth Headset Outdoor Hands-Free Speaker Bluetooth 5.3
The MAXTO BT-11 is a budget-friendly in-helmet Bluetooth headset designed for phone calls, music, and GPS audio. It pairs with Bluetooth 5.3, promises up to 48 hours (calls + music) and uses a detachable, velcro-style mounting for helmet fitment, but audio loudness and comfort can be hit or miss depending on helmet space and your riding needs.
FEYA Motorcycle Helmet Speakers Super Long Battery Life Helmet Headset with Hi-Fi Sound Quality Dual Noise Reduction IPX6 Automatic Answer/Call Music Control/AI Voice
FEYA’s helmet speaker headset is built for riders who want wireless music and GPS callouts without removing gloves, with a fast Type-C recharge and an IPX6-rated, weather-ready design. It supports dual-phone pairing and long claimed battery life, but fit depends on available speaker space in your helmet lining.
Sena Adult SRL Mesh Bluetooth Communication System for SHOEI Helmets (Black, One Size US)
Sena’s SRL-MESH is a helmet-integrated mesh and Bluetooth communication system built for specific SHOEI models (Neotec 2, GT-Air 2, J-Cruise 2). It’s designed to sit cleanly inside the helmet with Harman Kardon audio hardware, but buyer fit depends on whether your helmet model matches and whether you’re comfortable with setup and occasional firmware/update steps.
EJEAS V6 Pro Motorcycle Helmet Bluetooth Intercom (2-Pack)
The EJEAS V6 Pro is a 2-rider Bluetooth intercom built for dirt bikes, ATVs, and snowmobile rides, with active noise reduction, up to 18 hours of talk time, and IP65-rated protection. Best for pairs of riders who want clear call handling and music sharing without managing a complex setup.