iMah Replacement Battery 300-10186 for ADT Command Smart Security Panel
Quick take
The iMah Replacement Battery 300-10186 is a lithium-ion replacement for select ADT Command Smart touchscreen security panels, including ADT5AIO and ADT7AIO models and certain ADT 2X16 AIO panels. Buyers typically describe it as an easy, plug-in style swap that helps clear dead-battery errors. The main catch is compatibility, so you need to confirm the old battery part number (300-10186) and match the required voltage and connector type before ordering.
Pros and cons
Pros
- Made to replace the battery part number 300-10186 used in specific ADT Command Smart and Honeywell ADT touchscreen panels.
- Buyers frequently report the install process is straightforward and “fits perfectly” for the intended models.
- Includes built-in protection features such as over-charge, over-discharge, over-heat, over-current, and short-circuit protection.
- Lithium-ion design with stated capacity (3.6V, 27Wh, 7500 mAh) for the panel’s power needs.
Cons
- Compatibility depends on matching the old battery number and electrical/connector details, so it is not a universal battery.
- Battery longevity varies by use and the age of the system, and detailed run-time comparisons are limited in buyer feedback.
What buyers think
Buyer-review evidence for this replacement battery is strongest around usability and practical outcomes. Many comments emphasize that it installs easily and works as expected in ADT Command panel battery replacement scenarios. A recurring theme is resolving a “dead battery” or battery error condition after swapping out an older internal battery. Some buyers also frame it as a cost-effective alternative compared to more expensive replacement routes, while still reporting a good fit.
What is less clear from the available feedback is a consistent, detailed comparison of battery runtime (for example, hours or months under identical conditions). As with most replacement lithium-ion batteries, longevity likely depends on how the panel is used and how worn the original battery was, so buyers may want to focus on compatibility first.
Compatibility and what this battery is designed for
This is a replacement battery targeted at ADT Command Smart touchscreen security panel systems and certain Honeywell ADT touchscreen models that use the 300-10186 battery. Key supported panel listings include:
- ADT Command 5" Smart Home Touchscreen Security Panel: ADT5AIO-1, ADT5AIO-2, ADT5AIO-3
- ADT Command 7" Smart Home Touchscreen Security Panel: ADT7AIO-1
- Honeywell ADT 2X16 AIO Home Security Panel: ADT2X16AIO-1, ADT2X16AIO-2
Before buying, take a moment to confirm the battery number on the existing pack matches 300-10186. The product fit depends on more than the panel model name, so matching voltage and connector type matters.
Key specifications to sanity-check before you order
If you are comparing replacements, these are the details worth verifying against what your panel requires:
- Battery type: Lithium-ion, rechargeable
- Voltage: 3.6V (also referenced as 3.6V/4.2V)
- Capacity: 7500 mAh (27Wh is also listed)
- Protection features: over-charge, over-discharge, over-heat, over-current, and short-circuit protection
These specs are especially important if you are sourcing a replacement from a different brand. Even small voltage or connector mismatches can lead to installation problems or poor reliability.
Installation experience: what to expect
Replacement batteries are usually straightforward if you follow the correct disassembly steps for your specific panel model. Buyer feedback points to a “plug and play” style experience for the intended systems, including comments about easy access and a good physical fit.
That said, the success factor is still compatibility and careful handling. If your current battery reports errors, it may be worth replacing rather than continuing to troubleshoot software or power settings, but confirm the part number first.
Pros and cons for different buyer types
Best for
- Owners of the ADT Command Smart touchscreen panels and Honeywell ADT 2X16 AIO panels listed above who need a 300-10186 battery replacement.
- People looking for a practical, in-panel battery swap that buyers commonly describe as easy.
- Shoppers who prefer to solve a battery error by restoring proper internal power rather than leaving the system running on mains only.
Who should avoid it
- Anyone whose panel uses a different battery part number, different voltage, or a different connector type.
- Shoppers who want a universal battery for multiple home security systems (this is made for specific models).
Value and tradeoffs
At a lower price point than many original-equipment replacement paths, this battery can be a sensible choice when you have the correct part number. The main tradeoff is that battery performance proof in buyer comments is relatively high-level, with less granular detail on exact battery life in months across different usage patterns.
If your priority is reliability after replacement, the strongest buying signals here are the compatibility fit and the recurring “works in the panel” and “clears battery errors” themes from buyers.
Verdict
The iMah Replacement Battery 300-10186 is a solid pick for the ADT Command Smart and compatible Honeywell ADT touchscreen panel models that specifically use the 300-10186 battery. It is designed around the correct electrical characteristics and is commonly described as easy to install with a good fit. Just be strict about matching your existing battery number and connector details, because that is the main factor that determines whether you will have a smooth replacement.
FAQs
Q: Which panels are compatible with the iMah Replacement Battery 300-10186?
A: It is intended for specific ADT Command Smart touchscreen security panels (ADT5AIO-1, ADT5AIO-2, ADT5AIO-3, ADT7AIO-1) and certain Honeywell ADT 2X16 AIO panels (ADT2X16AIO-1, ADT2X16AIO-2) that use the 300-10186 battery part number.
Q: How do I make sure I’m buying the right replacement?
A: Check the battery number on your existing battery (should match 300-10186) and confirm the required voltage and connector type for your panel before ordering.
Q: Is this battery easy to install?
A: For the compatible panel models, buyers describe installation as straightforward and a good physical fit, but you should still follow the correct disassembly steps for your specific panel.
Q: Does it include battery protection features?
A: Yes. The battery is listed with protection against over-charge, over-discharge, over-heat, over-current, and short-circuit.
Q: What should I do if my panel shows a dead battery error?
A: If the error persists, replacing the internal battery with the correct compatible part number is a common next step, after verifying compatibility details (battery number, voltage, and connector type).
Specifications
| Product Title | iMah Replacement Battery 300-10186 for ADT Command Smart Security Panel | 3.6V 27Wh |
|---|---|
| Category | Electronics > Security & Surveillance > Home Security Systems |
| Brand | iMah |
| Manufacturer | iMahDirect |
| Model Name | 300-10186 |
| Model Number | Ryme B67_300-10186 |
| Item Weight | 0.11 Ounces |
| Number of Batteries | 3 Lithium Ion batteries required. (included) |
| Built-In Media | 1Pc iMah Ryme B67 300-10186 Lithium-ion Battery 3.6V/4.2V for ADT Command Smart Security Panel |
| Warranty Description | 1-Year Free Replacements of all quality-related issues from iMahDirect |
| Battery Cell Type | Lithium Ion |
| Battery Capacity | 7500 Milliamp Hours |
| Voltage | 3.6 Volts |
| Reusability | Rechargeable |
| Amperage | 3.6 Amps |
| Compatible Phone Models | 300-10186 Lithium-ion Battery 3.6V/4.2V, ADT Command Smart Security Panel ADT5AIO-1 ADT5AIO-2 ADT5AIO-3 ADT7AIO-1, Honeywell ADT 2X16 AIO Home Security Panel ADT2X16AIO-1 ADT2X16AIO-2 |
| Unit Count | 1.0 Count |
| Battery Weight | 146 Grams |
| Item Dimensions | 2.56 x 2.13 x 0.71 inches |
| Antenna Location | 300-10186 Lithium-ion Battery 3.6V/4.2V, ADT Command Smart Security Panel ADT5AIO-1 ADT5AIO-2 ADT5AIO-3 ADT7AIO-1, Honeywell ADT 2X16 AIO Home Security Panel ADT2X16AIO-1 ADT2X16AIO-2 |
| Battery Cell Composition | Lithium Ion |
| Recommended Uses For Product | 300-10186 Lithium-ion Battery 3.6V/4.2V, ADT Command Smart Security Panel ADT5AIO-1 ADT5AIO-2 ADT5AIO-3 ADT7AIO-1, Honeywell ADT 2X16 AIO Home Security Panel ADT2X16AIO-1 ADT2X16AIO-2 300-10186 Lithium-ion Battery 3.6V/4.2V, ADT Command Smart Security Panel ADT5AIO-1 ADT5AIO-2 ADT5AIO-3 ADT7AIO-1, Honeywell ADT 2X16 AIO Home Security Panel ADT2X16AIO-1 ADT2X16AIO-2 See more |
Recommended next
eufy Security Video Doorbell (Wired) S330 with Chime, Dual Cam, Delivery Guard, Security Camera, 2K with HDR, No Monthly Fee, 16-24V, 30VA, homebase NOT Supported, Motion Only Alert
The eufy Security S330 wired video doorbell is a no-monthly-fee option built around dual-camera coverage, 2K HDR video, and package-focused Delivery Guard reminders. Setup and video quality get praise, but buyer experiences vary on Wi-Fi connection behavior and long-term smoothness for some owners.
HENDUN Door Alarms When Opened with Remote, Door Bells Chimes, Door Security Sensor Pool Alarm for Kids Safety (2 Pack)
This 2-pack of battery-powered door contact alarms includes a remote to arm and disarm from outside, and it can also act like a door chime. Buyers consistently highlight how loud the alerts are and how quickly the units set up, but alignment and placement matter for reliable triggering.
Mighty Mule FM231 Wireless Driveway Alarm – Electromagnetic Vehicle Detection, review
The Mighty Mule FM231 is a battery-powered driveway alert that uses electromagnetic vehicle detection to notify you via an indoor receiver chime. It is a good fit for long driveways or rural properties where motion-sensor alerts from animals or pedestrians are a frequent problem, but range and placement can be finicky, especially once the sensor is buried.
SimpliSafe Panic Button - Built-in Silent Panic Feature - Compatible with SimpliSafe Home Security System - Latest Gen
The SimpliSafe Panic Button is a small, battery-powered add-on designed to trigger help quickly when you press it. It supports customizable panic alerts, including silent panic, and can be placed in easy-to-reach spots like bedrooms or near common areas. If you already use SimpliSafe Gen 3, it’s a straightforward way to add location-based emergency coverage, with the main catch being that it’s built for the SimpliSafe ecosystem (and requires the right monitoring setup).