Holicfun Protective Screen Cover and Anti-Glare Sun Visor Kit for Garmin Striker Plus 4 / Striker Vivid 4cv Fish Finder
Quick take
This custom-fit Holicfun kit is made for Garmin Striker Plus 4 and Striker Vivid 4cv owners who want two things from one accessory set: less screen glare in bright light and better protection for the display during transport and storage. The main tradeoff is that it uses lightweight ABS plastic, so it adds protection and usability rather than turning the screen into a rugged, drop-proof surface.
Pros and cons
Pros
- Designed specifically for Garmin Striker Plus 4 and Striker Vivid 4cv, with a snug fit that doesn’t block screen areas or buttons.
- Anti-glare sun visor helps cut harsh reflections for improved readability on the water.
- Includes a separate screen cover to help protect against scratches and dust during docking, storage, and transport.
- Can be used together or separately, depending on your day on the water.
- Quick install using included screws, with lightweight ABS construction.
Cons
- Protection is accessory-level, not a change to the fish finder’s waterproof rating.
- Some buyers note the plastic may not look as rugged as metal or heavier materials, so long-term durability is worth considering.
- The glare improvement is helpful for bright conditions, but results can vary by mounting angle and lighting.
What buyers think
Buyer-review evidence is generally positive for fit, ease of installation, and overall usefulness on the water. Multiple comments highlight that the kit fits the Garmin Striker 4cv line well and installs quickly, with straightforward screw mounting. Several buyers also mention that pairing the screen cover with the glare visor makes a visible difference for glare reduction and helps keep the screen protected during transport.
How this kit helps in real marine use
1) Reduce glare when the sun is high
The anti-glare sun visor is built to cut harsh reflections, which can wash out contrast on any marine display. If you fish or run in bright, direct light, that readability boost can make it easier to spot contours and interpret what you see at a glance.
2) Keep the display area cleaner during docking and storage
The dedicated screen cover is intended for protection from scratches and dust when your unit is being transported or left in storage. This matters if your Striker is frequently taken on and off a boat, carried in a gear bag, or exposed to dockside grit during busy days.
3) Use it as a system or as separate pieces
You can use the visor and cover together for maximum coverage, or use each component on its own depending on how you store and transport your fish finder. That flexibility can be especially helpful for anglers who want glare control while running, but still want the cover when the unit is stowed.
Design and compatibility you should know
- Compatibility: Made for Garmin Striker Plus 4 and Garmin Striker Vivid 4cv fish finders.
- Fit approach: Custom fit intended to avoid blocking the screen or buttons.
- What’s included: 1 screen cover, 1 sun visor, and 3 mounting screws.
- Material: Lightweight ABS plastic with a hard-shell design.
- Water consideration: Helps deflect rain and running spray, but it does not change the device’s waterproof rating.
Pros and cons, from a buyer’s standpoint
Best for
- Owners of the Garmin Striker Plus 4 or Striker Vivid 4cv who want better screen readability in bright sunlight.
- Anglers who dock, transport, or store their fish finder and want extra protection for the display area.
- Buyers who prefer quick, screw-on accessories over complicated mounts or adhesives.
Who should avoid it
- Shoppers looking to significantly increase durability against drops or impacts, since this is a lightweight ABS accessory.
- Anyone expecting a waterproof-rating upgrade, because the kit does not change the device’s waterproof specifications.
Verdict: is it worth it?
The Holicfun Protective Screen Cover and Anti-Glare Sun Visor kit looks like a practical “two-birds” accessory for the right Garmin models. If your biggest pain points are glare reducing visibility and keeping the display safe when you’re moving gear, the custom fit, quick installation, and the option to use pieces separately make it easy to live with. The main caution is material-level durability and that the kit is not a waterproof upgrade, so it’s best viewed as readability and cleanliness protection rather than impact armor.
FAQ
Will this work with the garmin striker plus 4 and striker vivid 4cv?
Yes. This kit is designed specifically for Garmin Striker Plus 4 and Garmin Striker Vivid 4cv fish finders.
Does the screen cover and visor block the screen or buttons?
The kit is designed for a custom fit intended to avoid blocking the screen area and access to the buttons.
Can I use the sun visor and screen cover separately?
Yes. The kit is designed so you can use the sun visor and screen cover on their own or combine them together.
Does it improve the waterproof rating of the fish finder?
No. The accessory helps deflect rain and running spray, but it does not change the device’s waterproof rating.
Is installation difficult?
Installation is described as quick and uses included screws, and buyers consistently mention it is easy to put on and take off.
How protective is the screen cover for transport?
The screen cover is intended to protect the display from scratches and dust during docking, storage, and transport.
Specifications
| Product Title | Holicfun Protective Screen Cover and Anti-Glare Sun Visor Kit for Garmin Striker Plus 4 / Striker Vivid 4cv Fish Finder |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | Holicfun |
| Manufacturer | Holicfun |
| Color | Black |
| Item Weight | 0.14 Kilograms |
| Compatible Devices | Garmin Striker Plus 4, Garmin Striker Vivid 4cv |
| Form Factor | Cover |
| Additional Features | Screen Protector |
| Water Resistance Level | Water Resistant |
| Shell Type | Hard |
| Enclosure Material | Plastic |
| Built-In Media | 1 x Screen Cover, 1 x Sun Visor, 3 x Mounting Screws |
| Warranty Description | 1 Year Limited Warranty |
Recommended next
Humminbird Ethernet Cable – 5 Ft., AS EC 5E
The Humminbird Ethernet Cable (AS EC 5E) is a Cat 5e, 5-foot Ethernet link designed to connect compatible Humminbird networked units, or connect a control head to a compatible Ethernet switch for sharing sonar and waypoints across your boat. It’s generally praised for reliable communication and solid build quality, with the main caveat being fit and pricing for your specific networking layout (and possible adapter needs for some older systems).
Garmin Heavy Duty Transom Mount with Spray Sheild
The Garmin Heavy Duty Transom Mount with Spray Sheild is a heavy-duty transom bracket designed to secure compatible transducers for steadier sonar returns and better long-term durability than typical plastic mounts. It includes a spray shield to help reduce splash at speed, but it is not meant to protect the transducer from underwater impacts when mounted in the water.
RAM MOUNTS Fish Finder Mount for Boats, Marine Electronics Drill-Down Mount with Medium Arm and AMPS Plate, Universal RAM-B-111U
The RAM-B-111U drill-down fish finder mount is built for boats that need a stable, adjustable hold for Garmin and compatible fish finders. It uses RAM’s ball-and-socket design for easy aiming, with a power-coated marine aluminum build and a stated maximum 6 lb device capacity, but it may require extra hardware for a perfect device fit.
Garmin Three-Axis Compass Heading Sensor
The Garmin Three-Axis Compass Heading Sensor adds more stable, more accurate heading for compatible Garmin chartplotters through a plug-and-play NMEA 2000 connection. It’s a solid pick for boats that see unstable “spinning” heading on the map or that want heading performance that stays believable at low speed, even when GPS course-over-ground is less helpful.