fits 2012-2014 Kia Rio / 2010-2013 Kia Soul Flip Key Fob Remote Case Shell (NYOSEKSAM11ATX), Set of 2
Quick take
This flip key fob case shell set is built for 2012-2014 Kia Rio and 2010-2013 Kia Soul, helping you replace a worn or damaged outer fob. It’s a shell and button pad replacement (no electronics), so you’ll need to move the internals from your old key fob. The biggest caveat is DIY transfer, especially if your old fob includes additional parts you might overlook during the swap.
Pros and cons
Pros
- Vehicle-specific fit for 2012-2014 Kia Rio and 2010-2013 Kia Soul flip key fobs.
- Includes replacement case and button pad, plus an uncut blade (no electronics included).
- Designed so remote portion does not require re-programming (you reuse your existing remote internals).
- Set of 2 gives you a spare shell option if you are restoring a second key.
Cons
- Not a plug-and-play remote, you must carefully transfer parts from the old fob.
- Some buyers note fit and hinge/button alignment can vary, requiring swapping the original button or other small components.
- If your old fob includes extra key parts like a transponder, missing them can prevent the car from starting.
What buyers think
Buyer-review evidence is too limited to draw a reliable, universal pattern for long-term durability, since most comments focus on one-time replacement success. However, the recurring themes that do show up are practical: the shells are generally viewed as good value for restoring a broken button situation, the main challenge is opening the old fob without damaging internal parts, and DIY guidance (often via video) tends to help. Some buyers specifically mention that aligning or transferring small components (like hinge/button pieces and any key-related parts) can be the difference between a smooth fix and a frustrating afternoon.
What this replacement actually is
This product is a replacement flip key fob case shell and button pad for specific Kia models. It is an aftermarket replacement part, so you are not buying a complete factory fob with electronics. The set includes replacement hardware to build the new shell, and it comes with an uncut blade, which you can cut to match your key if needed. The remote portion is intended to be reused from your existing key fob, which is why re-programming is typically not required for the remote itself.
Compatibility and model fit
It is intended for:
- 2012-2014 Kia Rio
- 2010-2013 Kia Soul
Because this is a vehicle-specific shell, double-check you have the correct flip key fob style before ordering. If your fob design differs, the internal transfer may not line up correctly with the new shell.
Installation reality check (what you’ll likely do)
Most of the effort comes from moving the contents of your old fob into the new case. Buyers commonly report that the hardest part is separating the old shell carefully (especially if it has been in service for years). After that, putting the pieces into the new case is typically straightforward, but small fitment details can matter.
Button, hinge, and alignment considerations
A recurring theme is that some internal pieces from the old fob may not match perfectly in the new shell (for example, hinge or button alignment). In those cases, transferring the corresponding original small part can restore the intended feel and movement of the flip mechanism.
Key-related parts matter for starting
Another important theme is that key fobs can include more than just remote controls. Some buyers mention that if a key-related part (such as a transponder) is missing from the rebuilt fob, the car may not start even though the buttons appear to work. The takeaway is to move everything you need from the old fob methodically, and avoid assuming only the “button board” is required.
Pros and cons (expanded)
When this is a smart buy
- You have a Kia Rio or Soul flip key where the outer case or buttons are worn or broken, and you want to refresh it without ordering a complete replacement fob.
- You have one or more working remotes already, and you’re comfortable transferring internals into a new shell.
- You want a spare shell option (set of 2) if your household uses multiple keys.
Who should avoid it
- You want a fully assembled, ready-to-go replacement with no part swapping. This is not that.
- You are not comfortable opening the fob and handling small components, springs, and alignment pieces.
- You rely on the dealer or locksmith for everything and do not want to DIY any key-fob rebuilding.
Is it worth the money?
If your main issue is cosmetic wear or button failure on a Kia Rio or Soul flip key, this shell set is often a cost-sensitive way to extend the life of your existing fob electronics, because you reuse the parts that handle remote function. The value depends on your willingness to do the swap carefully, since the cost savings versus dealer replacement typically come with extra DIY work.
How it compares to other options
- Dealer or locksmith replacement: Usually higher cost and often involves programming time. This shell set can be cheaper when your electronics are still fine, but you trade that savings for DIY transfer effort.
- Universal or non-matching shells: If the fit is wrong, alignment and internal seating can become a hassle. Vehicle-specific fit reduces that risk, but only if your fob style truly matches.
- Replacing the whole fob: Best when your internal electronics or key components are already failing. A shell replacement is best when the internals are still usable.
FAQs
FAQ
Does this include the electronic remote?
No. This is a replacement case and button pad kit, built for you to transfer your existing remote internals into the new shell.
Will I need to re-program the remote?
Re-programming is not required for the remote portion because you reuse your existing remote internals. (Your specific key setup still matters, especially for any key-related parts.)
Is the blade included and is it already cut?
An uncut blade is included. You may need to cut it to match your original key.
Which Kia models does this fit?
It’s intended for 2012-2014 Kia Rio and 2010-2013 Kia Soul flip key fobs.
Is it difficult to swap the old fob parts into the new shell?
Buyers generally find the rebuild manageable, but opening an older fob and transferring small internal components can be the toughest part. Checking videos or step-by-step guidance tends to help.
What happens if I miss a part during the transfer?
If your key fob includes key-related components beyond the remote board, missing the correct part can prevent the car from starting. Take a careful, systematic approach to moving everything you need from the old fob.
Specifications
| Product Title | fits 2012-2014 Kia Rio / 2010-2013 Kia Soul Flip Key Fob Remote Case Shell (NYOSEKSAM11ATX), Set of 2 |
|---|---|
| Category | Automotive > Interior Accessories > Anti-Theft > Accessories |
| Brand | USARemote |
| Manufacturer | USARemote |
| Model Number | 13 |
| Color | ki-nyo-3b-flip-case x2 |
| Material | Plastic |
| Item Weight | 2 Ounces |
| Brand Name | USARemote |
| Compatible with Vehicle Type | Car |
| Automotive Fit Type | Vehicle Specific Fit |
| Manufacturer Part Number | ki-nyo-3b-flip-case |
| Material Type | Plastic |
| Button Quantity | 3 |
| Item Dimensions L x W | 2"L x 1"W |
| Vehicle Service Type | Car |
Available variants
Color
- ki-nyo-3b-flip-case
- ki-nyo-3b-flip-case x2
Recommended next
Viper 7345V 2-Way Remote (Replacement for 7341V & 489V)
The Viper 7345V is a 4-button 2-way replacement remote designed for select Viper security and remote-start systems (including 4305V, 3305V, and 5305V). It uses an LCD display and provides both visual and audible confirmation when commands are sent successfully, with a stated range up to 1,500 feet (and up to 1/2 mile in the feature bullets). The main caveat is making sure your Viper system is compatible, since this remote is not universal.
MechanMagic Key Fob Remote Replacement Fits for Honda Civic EX review
MechanMagic’s 3-button key fob replacement is designed for specific Honda Civic (2001–2005, select trims) and Honda Pilot (2003–2007) models. It includes a CR2 battery, supports regular-key vehicles (not push-start), and uses a self-programming process that requires a working key.
Faraday Pouch For Key Fob, RFID Signal Blocking Holder, 5.6″x3.7″
A Faraday key fob pouch designed to block incoming and outgoing signals when you store your fob. The M size (5.6″x3.7″) fits about 1 to 3 fobs depending on how they fit, and the upgraded wider U-shaped hook helps it stay accessible. Best for at-home or purse/bag storage, with the main tradeoff that the pouch can feel tight if your fob is bulky or if you need extra room for other items.
WHonor Faraday Box, RFID Key Fob Protector, 8.0" x 5.2" x 2.8" Anti-Theft Signal Blocking Shielding Cage with Faraday Pouch 2 Pack
The WHonor Faraday Box is a hard, ABS “cage” style organizer designed to block key fob and other wireless signals when you store them at home. It comes with two Faraday pouches plus two RFID blocking cards, making it a simple bundle for car-key and wallet-style protection, with the main tradeoff being you may need to get used to how the fob pouches are positioned for normal keyless use.