EWAY for Garmin Nuvi Drive Drivesmart Windscreen Windshield Suction Cup Mount Holder Bracket Cradle Mount
Quick take
This EWAY windshield suction cup mount is designed as a replacement cradle for compatible Garmin Nuvi, Drive, and DriveSmart models that use a 17mm ball joint. It offers strong suction via a gel pad and supports 360-degree rotation so you can adjust the screen angle without blocking your view. The main tradeoff with suction mounts is that performance depends on having the right mounting surface and maintaining adhesion over time.
Pros and cons
Pros
- Compatibility built around Garmin models that use a 17mm ball joint and a tailored cradle fit
- Strong suction cup design with a 2.5-inch gel pad for windshield, dashboard, or other smooth flat surfaces
- 360-degree ball joint rotation for flexible viewing angles
- No-tools installation style, with a straightforward cradle attachment
Cons
- As a suction mount, it relies on surface smoothness and gel pad adhesion (which can be affected by dust and conditions)
- Not a universal mount, so you need to confirm your specific Garmin model and connector style
What buyers think
Buyer feedback is limited, but the available reviews point to a consistent theme: the mount fits like the original cradle and works as intended after replacement. Several comments emphasize practical outcomes, such as it fitting properly and performing well in everyday use. Because the review sample is relatively small and details are brief, buyer-review evidence is not strong enough to infer long-term durability beyond basic “works well” impressions.
Key features that matter for daily use
Compatibility and connector fit
This mount is targeted at specific Garmin Nuvi, Dezl, RV, Drive, and DriveSmart devices that use a 17mm ball joint. It is also listed as compatible with a range of model numbers (including multiple Nuvi variants and related Drive lines), but you should double-check your GPS model before buying to avoid an imperfect fit.
Windshield or dashboard suction mounting
The suction cup uses a 2.5-inch sticky gel pad intended to grip a windshield, dashboard, countertop, or other smooth flat surfaces. There is also guidance for restoring adhesion by rinsing the sticky surface with warm water and wiping it dry, which can help if the gel pad loses tackiness.
360-degree angle adjustment
A 360-degree ball joint lets you tilt and rotate the cradle to find a comfortable viewing angle. This is useful if you drive with different seating positions or want to avoid glare by changing the screen orientation.
Reinforced cradle build
The holder is made with reinforced hard plastic and is meant to match the feel of an original-style fit. The listing also describes reusable gel pads for long-term everyday use, with performance intended to hold up across hot and cold conditions.
Pros and cons (real-world fit and decision points)
- Best fit for: Drivers who need a replacement Garmin windshield/dashboard mount for compatible models, especially when the original cradle is missing or damaged.
- Best mounting surfaces: Windshields or dashboards that are smooth and clean enough for the gel pad to adhere reliably.
- Rotation advantage: If you want quick screen-angle changes, the 360-degree adjustment helps you dial in a practical view.
- Main limitation: Suction mounts can underperform if the mounting area is dusty, textured, curved in a way that prevents full contact, or if adhesion decreases over time.
Who should buy this mount
Consider the EWAY suction mount if you:
- Have a compatible Garmin Nuvi, Drive, or DriveSmart unit that uses the 17mm ball joint connection.
- Prefer a windshield or dashboard mount and want an easy, no-tools install style.
- Need a replacement cradle that can hold the GPS securely in a typical driving setup.
Who should avoid it
This is likely not the right choice if you:
- Need a universal mount for a wide range of devices, because fit is tied to specific Garmin models and the 17mm ball joint.
- Don’t have a suitable smooth mounting surface, or you frequently deal with adhesive issues (for example, very dusty dashboards or surfaces that do not stay clean).
Comparison guidance (what to compare if you look at alternatives)
If you’re comparing other vehicle mounts, use these criteria to decide quickly:
- Compatibility: Confirm model support and connector style (for this mount, the 17mm ball joint is key).
- Mount type: Suction mounts are convenient, but they depend on surface conditions, while alternatives like adhesive or vent mounts behave differently.
- Adjustment range: Make sure you get enough rotation to set your screen angle comfortably.
- Cradle fit: Look for replacement-style cradles that match the original holder dimensions rather than generic fits.
Verdict
The EWAY E-way windshield suction cup mount is a practical replacement option for select Garmin Nuvi/Drive/DriveSmart models, with a strong focus on correct cradle fit, reliable suction, and 360-degree viewing adjustment. It is a good pick for shoppers who want something simple and easy to mount, with the understanding that suction-based performance depends on clean, suitable mounting surfaces.
FAQ
Is this mount compatible with all Garmin GPS devices?
No. It is intended for specific Garmin models that use a 17mm ball joint connection, including listed Nuvi, Drive, and DriveSmart-compatible variants. Check your GPS model and connector style before purchasing.
Will it work on a windshield or dashboard?
Yes. The suction cup design is intended for windshield, dashboard, and other smooth flat surfaces. For best results, the surface should be clean so the gel pad can adhere properly.
Does it allow screen rotation?
Yes. The mount includes a 360-degree ball joint to adjust the display angle to a comfortable position.
Is it hard to install?
No. The mount is described as easy to use and install without tools, using a cradle attachment and suction mounting.
What if the suction power weakens over time?
The listing indicates that you can restore adhesion by rinsing the sticky surface with warm water and wiping it dry. This can help if the gel pad loses tackiness.
Where can I buy the EWAY Garmin suction mount?
Specifications
| Product Title | EWAY for Garmin Nuvi Drive Drivesmart Windscreen Windshield Suction Cup Mount Holder Bracket Cradle Mount or Garmin GPS 40 42 52 55 60 61 67 68 2457 2497 2539 2557 2558 2577 2597 LT LMT |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | EWAY |
| Manufacturer | EWAY |
| Model Name | Garmin Accessories GPS Bracket Cradle Mount |
| Item Weight | 0.13 Kilograms |
| Compatible Devices | Compatible with Garmin Nuvi 42LM 44 52LM 54 55LMT 56 58 2407 2408 2447 2448 2467 2497 2507 2508 2547 2548 2557 2567 2577 Nuvi GPS |
| Compatible Phone Models | Garmin Nuvi 42 42LM 44 44LM 52 52LM 54 54LM 55 55LM 55LMT 56 56LM 56LMT 2457LMT 2497LMT 2577LT 2558LMTHD |
| Mounting Type | Windshield |
| Additional Features | Adjustable |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 2 x 2 x 3 inches |
| Unit Count | 1.0 Count |
| Warranty Description | 1 |
| Built-In Media | Garmin Accessories GPS Bracket Cradle Mount with GPS Windshield Mount Holder |
| Enclosure Material | Plastic |
| Special Feature | Adjustable |
Recommended next
WINDFRD Aluminum Fish Finder Mount with 1.5" / C Size Ball (Marine Medium Arm)
A saltwater-ready aluminum fish finder mount designed for C-size (1.5") ball systems, with a double-socket arm and a universal mounting plate. Strong, adjustable, and praised for staying stable in choppy conditions, but you need to confirm your unit’s screw pattern and that the 1.5" ball size is the right fit for your setup.
Bracketron NavMat Portable GPS Dash Pad Converts Windshield GPS Mount
The Bracketron NavMat is a portable, weighted friction dash pad that lets you turn a windshield-style suction mount into a dashboard mount. It’s a good fit for drivers who want a stable, non-slip base on textured dashboards and want something easy to move between vehicles, with the tradeoff that it is not water-resistant and won’t suit everyone’s dashboard surface.
Thinkware GPS Antenna for X1000/X700, F200 PRO/FA200, ARC
A simple windshield-mount GPS antenna made for Thinkware dash cams that support ARC logging. It’s designed to add time, speed, and location context to your recordings, with an easy install and a built-in 10-inch cable. Main caveat: it only makes sense if you have a compatible Thinkware model that uses ARC GPS logging.
Garmin Varia Radar Seat Rail Mount
The Garmin Varia Radar Seat Rail Mount is an optional kit that lets you attach a compatible Varia rearview radar under your saddle on standard 7 mm round alloy seat rails. It tidies up the look and can feel more secure than lower-cost rail mounts, but you will want to double-check rail type and whether the mount clears your saddle bag. View latest price on Amazon.