DYMO Authentic D1 Labels 1/2-Inch x 23-Foot Roll Black Print on White (2-Pack)
Quick take
These DYMO D1 labels are 1/2-inch wide black print on white, supplied as a 2-pack of 23-foot rolls. They’re designed for compatibility with many DYMO LabelManager and LabelWriter models that use D1 standard labels, and they adhere to most clean, flat surfaces. The biggest buying caveat is ongoing replacement cost, which can matter if you label frequently.
Pros and cons
Pros
- Made for DYMO LabelManager and LabelWriter Duo label makers that use D1 cartridges.
- Easy-peel split backing for quicker application.
- Works on a wide range of clean, flat surfaces (plastic, paper, metal, wood, glass).
- Black print on white is a readable, classic labeling choice for home and office.
Cons
- Value can feel less attractive if you go through cartridges often.
- Best results depend on using compatible DYMO models and D1 tape width (1/2-inch).
What buyers think
Buyer review evidence is broadly positive, with many comments focused on day-to-day reliability and “fits” when used in matching DYMO LabelManager setups. Buyers also commonly call out that the tape is practical for routine organization tasks, including labeling items like network hardware and cables. Some feedback mentions price sensitivity, suggesting the main frustration tends to be replacement tape cost rather than label performance.
What this tape is for
This is a roll format of DYMO D1 labels in the popular 1/2-inch (12mm) width, using black print on white tape. If you’re organizing shelves, binders, labelling tool boxes, or tagging equipment, the readable black-on-white format is often a go-to choice for both home and office use.
The adhesive is intended for most clean, flat surfaces, including plastic, paper, metal, wood, and glass, which covers many of the places labels end up in real life.
Compatibility and size check (do this before buying)
The D1 format is the key to compatibility. This label cassette size is 1/2-inch wide, and it is meant for DYMO LabelManager models such as 120P, 160, 200, 210D, 220P, 260P, 280, 300, 350, 360D, 400, 420P, 450, 500TS, PC, PC II, PnP, Wireless PnP, COLORPOP!, and for LabelWriter 450 Duo and LabelPoint series models including 100, 150, 200, 250, and 300, 352.
If your machine uses a different tape width or a different label system than D1, this roll may not load or may not print correctly. Measure your current tape width or confirm your model’s supported label type.
Adhesion and labeling in everyday conditions
DYMO positions these as reliable on clean, flat surfaces, which matters because adhesion performance is strongest when the surface is smooth and properly prepared. For labels that need to stay put on common household and office materials like plastic casings, glass surfaces, and painted wood, this is the right category of tape.
Easy-peel split backing is a practical benefit for users applying many labels in a session, since it can reduce the friction of peeling and aligning each label.
Pros and cons in real buying terms
When it’s a strong fit
- You have a compatible DYMO LabelManager or LabelWriter Duo model that uses D1 labels.
- You want black-on-white text labels that are easy to read at a glance.
- You label mostly on clean, flat materials, such as plastic storage bins, metal shelves, or glass.
- You prefer an easy-peel backing for faster, repeatable application.
When you may want a different option
- You’re highly budget-sensitive on replacement supplies and need a better value pack strategy for frequent labeling.
- You don’t want to commit to the DYMO D1 ecosystem, or your machine uses a different label width or label type.
Price and availability
Pricing can vary by retailer and pack size, and buyer sentiment suggests replacement tape cost is a common consideration over time. If you label frequently, compare the per-roll cost of the formats you use most often (width, color, and tape type) to avoid paying a premium repeatedly.
Alternatives to consider
If you’re choosing between label tape options, the decision usually comes down to compatibility and your surface/labeling needs.
- Different DYMO tape sizes or colors: If you label for different purposes (cable tags vs. general storage), selecting the right width and color can reduce label clutter and improve readability.
- Different label types within DYMO’s lineup: If you need different durability or a different printing format, consider label categories that match your specific application environment (for example, indoor-only organization vs. more demanding conditions).
- Non-DYMO label brands: These can look cheaper, but you still need to ensure the tape is the correct D1 system and compatible with your exact DYMO model. If fit is your top priority, sticking to the right DYMO D1 cassette is often the safer bet.
Verdict
DYMO Authentic D1 1/2-inch black-on-white labels are a straightforward, practical choice if you’re already in the DYMO D1 ecosystem and want readable labels that stick to common clean, flat surfaces. The performance and day-to-day “works as expected” feedback is consistent, while value is the main tradeoff buyers weigh when it’s time to replace tape.
FAQ
Will these DYMO D1 labels work with my LabelManager?
They are intended for many DYMO LabelManager models that use D1 standard labels, including (among others) 120P, 160, 200, 210D, 220P, 260P, 280, 300, 350, 360D, 400, 420P, 450, 500TS, PC, PC II, PnP, Wireless PnP, and COLORPOP!. Confirm your machine supports DYMO D1 labels and that you need the 1/2-inch width.
Are these labels good for cable or network hardware labeling?
Yes, the tape format is commonly used for everyday labeling tasks, including network hardware and cables. As with any adhesive label, results are best when applied to clean, flat surfaces.
What surfaces do these labels stick to?
They are designed to adhere to most clean, flat surfaces such as plastic, paper, metal, wood, and glass. Avoid applying to dirty or highly textured surfaces, where adhesion may be less reliable.
How wide are the labels, and how long is each roll?
Each roll is 1/2-inch (12mm) wide and 23 feet (7 meters) long. This listing includes a 2-pack.
Is the easy-peel backing helpful?
Yes. The split backing is meant to make application faster and reduce the hassle of peeling and aligning labels, especially if you’re applying multiple labels in one session.
Is this tape worth it if I use my label maker often?
It can be, if your priority is reliable compatibility with your DYMO D1 label maker and a readable black-on-white format. If you label heavily, watch replacement pricing and compare per-roll value so the ongoing cost fits your budget.
Specifications
| Product Title | DYMO Authentic D1 Labels 1/2-Inch x 23-Foot Roll Black Print on White Self-Adhesive For LabelManager Label Makers 2-Pack |
|---|---|
| Category | Electronics > Accessories & Supplies > Office Electronics Accessories > Labeling Tapes |
| Brand | DYMO |
| Manufacturer | Newell Rubbermaid Office |
| Model Number | 45013 |
| Color | Black/White |
| Material | Paper, Polyester |
| Size | 2 Pack |
| Item Weight | 0.1 Pounds |
| Brand Name | DYMO |
| UPC | 071701002389 |
| Global Trade Identification Number | 00071701002389 |
| Unit Count | 2.0 Count |
| Number of Items | 2 |
| Manufacturer Part Number | 45013 |
| Warranty Description | Black print on clear label maker tape. 3.543 inches long by 2.559 inches wide by 0.787 inches high. 0.066 pounds. |
| Finish Type | Adhesive |
| Item Shape | Rectangular |
| Pattern | Polyester Tape |
| Style | Polyester Black on White |
| Ink Color | White |
| Number of Labels | 2 |
| Line Size | 1/2 inch |
| Material Type | Paper, Polyester |
Available variants
Size
- 1 Pack
- 6 Pack
- 32 Pack
- 2 Pack
Recommended next
6 Pack Replacement for Brother P Touch Label Maker Tape
This 6-pack replacement set is designed for Brother P-touch label makers that use compatible TZe/TZ 12mm laminated tapes. With multiple color options and long tape lengths, it is a practical choice for everyday organization, labeling bottles and cables, and indoor to outdoor-style durability needs. The main caveat is compatibility, especially if your P-touch model uses “Btag” tape or a non-TZe format.
Brother Genuine P-Touch TZE-241 Tape, 3/4" (0.70") Standard Laminated P-Touch
Brother’s TZE-241 black-on-white laminated label tape for 3/4 in Brother P-touch label makers. It’s built with multi-layer lamination for durability and long-term readability in indoor and outdoor conditions, with water and abrasion resistance. This is a strong pick when you want labels that stay put, but buyers should confirm compatibility with their specific P-touch model.
10Pack TZe-231 Compatible Brother Label Maker Tape 12mm 0.47 White (Black on White)
This 10-pack of 12mm TZe-231 style label tape (black on white) is designed for compatibility with many Brother P-touch machines that use TZ231/TZe-231 cartridges. It’s a value-focused option if you print lots of labels and want long-lasting, laminated durability, with the main caveat being compatibility limits for non-P-touch and Brother M-series style tapes.
6-Pack Paper Black on White Tape Compatible for DYMO Label review
This 6-pack of black-on-white paper label tape is designed to work with compatible DYMO LetraTag-style label makers, offering crisp, smudge-resistant text and residue-free peel for everyday labeling. It’s a strong refill option for ongoing home or office organization, with one common caveat: tape color can look different from listings, and loading the refills may take a quick learning curve.