ChromLives Photo Copy Stand Pico Projector Stand with Phone Clamp
Quick take
This ChromLives tabletop “photo copy” stand doubles as an overhead phone mount and a support for small pico projectors. It extends from about 20 cm to 40 cm, with an adjustable tilt range, and it’s made with an aluminum alloy rod and a cast-iron base for everyday tabletop stability.
The main caveat is fit and balance: stability and tilt can change based on how heavy your device is and how far you stretch the stand. If you plan to mount heavier projectors, you may need a different support strategy.
Pros and cons
Pros
- Adjustable height (about 20 cm to 40 cm) and tilt range (around 30° to 90° depending on phone weight).
- Designed for overhead use with a universal phone spring clip (fits phones roughly 6 to 10 cm wide).
- Lightweight and portable tabletop setup (about 0.6 kg), easier to move than a full tripod.
- Stated max load up to 3 kg, with an aluminum alloy rod and cast-iron base.
Cons
- Stability depends on device weight and extension, extended setups may feel less forgiving.
- The top clip/attachment type can be finicky, and some users prefer removing the top attachment and screwing certain projectors directly in.
- Best for smaller phones and lighter pico projectors, not for heavier gear.
What buyers think
Buyer-review evidence points to a clear split in outcomes based on device weight and how the mount is configured. Reviews commonly describe the stand as easy to assemble, lightweight, and well-suited for short, overhead setups like projecting content or holding a phone while creating or filming small scenes. When used within its intended niche (lightweight phones and lighter projectors), the stand is described as doing the job and remaining steady.
Where buyers raise issues, it tends to involve either a mounted projector that feels too heavy for the setup or a mount that can be less rigid when using the clip-style top attachment. In those cases, users report improving stability by changing the way the device is attached, such as screwing directly into the 1/4 mounting point rather than relying on the clip insert.
Overall, buyer sentiment is positive, but the consistency of the results appears to depend on matching the stand to the right device weight and attachment method.
Who this stand is for
This ChromLives stand is a strong match if you want an overhead, tabletop-friendly way to position a smartphone or a small pico projector for content creation, simple document-style shots, or casual live projection setups.
- Phone overhead filming and viewing: The spring clip is intended to fit most phones in the supported width range, which makes it convenient for quick setup.
- Pico projector “positioning” needs: The stand includes a universal 1/4 screw head and is rated for a max load of 3 kg, which is useful when your projector has compatible mounting or can be secured appropriately.
- Travel and compact setups: At roughly 0.6 kg with a folded size around 8 inches, it’s built for moving between locations.
Key features that matter in real use
Height and angle adjustment
You can adjust the stand from a shrink height of about 20 cm to an extension height of about 40 cm. The tilt angle is reported as adjustable from about 30° to 90°, with the note that heavier phones can limit how far the unit tilts. Translation for buyers: if your device is heavier, you may need to use a more conservative angle to maintain balance.
Mounting options: phone clip plus 1/4 screw head
The phone clamp uses a spring-style holder for overhead positioning, and the top includes a universal 1/4 screw head for compatible devices. Reviews suggest that attachment method matters, especially if you’re using a projector: relying on the clip insert may feel less secure for some setups, while direct screwing into the mounting point can improve stability for some users.
Stability and materials
The rod is made from aluminum alloy and the base is cast iron. The base also uses skid reduction on the legs to help keep the stand from sliding around your tabletop. Even so, multiple buyer comments reinforce that stability changes with extension and the weight of what’s mounted.
Pros and cons (decision checklist)
Good fit if you prioritize
- A compact overhead mount that’s easy to carry and set up quickly.
- A stand for phones and smaller projectors within the stated load limit.
- Adjustable height and tilt for different tabletop heights and viewing angles.
Consider alternatives if
- Your projector or device is on the heavier side, or you need a very rigid mount at maximum extension and extreme angles.
- You want a “set it and forget it” experience with a single attachment style, since some users improve stability by changing how the device attaches.
Price and availability
This model is positioned as an affordable tabletop accessory compared to full-size tripods. If you are deciding between spending less for a lightweight overhead stand versus more for a heavier-duty support, consider whether your device weight and expected angle range fall comfortably within the stand’s intended use.
How it compares (by buyer need)
If you want phone overhead shots
Choose this stand if you primarily need a phone clamp, quick setup, and adjustable height for overhead framing. For heavier phones in demanding tilts, plan on using moderate extension and angles for better balance.
If you want a pico projector setup
Choose this stand if your projector is lightweight and can be secured using the provided mounting approach. If your projector is heavier or you need the widest angle at full extension, you may want a sturdier projector mount designed specifically for that weight and geometry.
Verdict
The ChromLives Photo Copy Stand Pico Projector Stand with Phone Clamp is a practical choice for overhead phone mounting and small pico projector positioning, especially when you value portability and adjustable tabletop height. It performs best when the device weight and extension level are balanced, and when you use the most secure attachment method for your specific phone or projector.
FAQs
What devices can it hold?
It’s designed for smartphones within the supported clamp width range and it also supports devices that can be secured using the universal 1/4 screw head. The maximum weight recommendation is 3 kg.
How adjustable is the stand?
It extends from about 20 cm (shrink height) up to about 40 cm (extension height). The tilt angle is adjustable (about 30° to 90°), with the note that heavier phones may reduce the achievable tilt.
Is it stable on a tabletop?
The cast-iron base and skid reduction legs are intended to improve stability. In practice, stability depends on how far the stand is extended and the weight of the mounted device, so lighter loads and moderate angles tend to work better.
Can I mount a projector on it?
Yes, it’s meant for pico projector setups and includes a universal 1/4 screw head. If the projector feels too heavy or the attachment feels loose, consider using the more secure attachment approach (for compatible projectors) rather than relying on the phone-style clip insert.
Is it portable enough for travel?
It’s lightweight (around 0.6 kg) and folds down to a compact size (about 8 inches), which makes it easier to carry than typical full-size tripods.
Specifications
| Product Title | ChromLives Photo Copy Stand Pico Projector Stand with Phone Clamp Overhead Phone Mount Smartphone Compatible Tripod |
|---|---|
| Category | Electronics > Camera & Photo > Tripods & Monopods > Tabletop & Travel Tripods |
| Brand | ChromLives |
| Manufacturer | ChromLives |
| Model Name | 1220 |
| Model Number | 1220 |
| Screen Size | 40 Centimeters |
| Color | Pic Projector |
| Item Weight | 0.6 Kilograms |
| Unit Count | 1 Count |
| Manufacturer Part Number | 1220 |
| Item Length | 40 Centimeters |
| Folded Size | 8 inches |
| Compatible Devices | Projectors, Smartphones |
| Audio Recording | No |
| Water Resistance Level | Not Water Resistant |
| Media Type | ProductImage |
| Maximum Weight Recommendation | 3 Kilograms |
| Number of Items | 1 |
Available variants
Color
- phone stand with light
- Phone Video Stand
- Pic Projector
- Phone Copy Stand
Recommended next
Koolehaoda Camera Mini Tripod Table Stand
The Koolehaoda MT-02 is a compact aluminum desktop mini tripod designed for lightweight camera and accessory setups. It offers dual 1/4- and 3/8-inch screw mounting, adjustable leg height/angle, and non-slip feet for steadier tabletop shots, with a key tradeoff: some components may not be fully metal where it impacts load capacity.
Bullet Time Handle Tripod Multi-Functional Tabletop Fold Tripod for insta360 X5/X4
This mini tripod doubles as a bullet time handle for compatible Insta360 and action cameras, adding a 1/4-inch screw mount and smooth rotation for spinning shots. It is lightweight and compact for tabletop use, but it does not offer adjustable tripod height and the stability depends on how you use it (especially with a selfie stick).
Photography Light Stand, 110"/9.2ft/280cm Portable Reverse Folding Tripod with Travel Bag Aluminum Heavy Duty for Camera,Video,Softboxes,Umbrell,Wedding Outdoor Video Shooting (2 Pack)
A compact, reverse-folding light stand kit built for small-to-mid setups, with up to 280 cm reach and an 11 lb load limit. It is a solid value option for budget strobe or lightweight video lighting, but buyer experience suggests it may not feel truly “heavy duty,” and some owners report arrival damage or hardware quality tradeoffs.
XTAR Starlink Mini Tripod Stand (Adjustable Tripod Mount)
A compact, travel-friendly tripod stand made to hold a Starlink Mini dish off the ground with a dedicated mounting adapter. It adjusts height quickly and folds for easier RV and camping use, with the main tradeoff being a relatively small, shorter form factor.