Bingfu Fakra Z Female to SMA Female Vehicle Antenna Adapter Cable 30cm (12 inch)
Quick take
This 30cm (12 inch) Fakra Z (water blue) female to SMA female coax adapter cable is built for vehicle antenna integrations where your head unit or module expects an SMA female connection. It is a straightforward, low-cost way to bridge compatibility for FM/AM, GPS navigation, Sirius XM, DAB (where supported), and some 4G LTE telematics Bluetooth modules, but it will only make sense if your ports match these exact connectors.
Pros and cons
Pros
- Correct connector pairing for compatible installs: Fakra Z (water blue) female to SMA female.
- Short, install-friendly length (30cm / 12 inch) for routing between a vehicle antenna lead and an SMA input.
- Built for common vehicle RF use cases, including GPS navigation and FM/AM, plus satellite/telematics-style setups.
- Review feedback broadly characterizes it as functional and useful for practical antenna signal management projects.
Cons
- Fit depends entirely on connector standards, Fakra Z color coding, and whether your device actually uses an SMA female port.
- Not a “universal” adapter for every Fakra variant, so mismatched Fakra types can leave you stuck.
What buyers think
Buyer-review evidence is limited, but the available feedback consistently frames the cable as practical for RF and vehicle antenna tinkering. Several reviewers describe it as working as intended for routing or adapting antenna connections, including setups involving GPS and other vehicle antenna-related signals. A few also mention using the cable in reversible signal-disconnect style projects, suggesting it is easy to integrate into small, DIY-friendly antenna workflows. What is less clear from the review snippets is performance detail (for example, signal loss at specific frequencies), so expectations should focus on getting the right physical connector interface and having a workable coax jumper.
Key specs that matter for compatibility
- Connectors: Fakra Z (water blue) female to SMA female.
- Length: 30cm / 12 inch.
- Impedance: 50 ohms.
- Item: 1 cable.
Where this antenna adapter cable fits best
This is the kind of cable you buy when you already know your vehicle antenna lead uses a Fakra Z (water blue) style connector and your target device expects an SMA female coax input. It is a good fit for:
- Aftermarket head units and Android-style navigation systems that need SMA female for GPS or mixed radio functions.
- Vehicle RF integrations where you are bridging an OEM antenna connector to an SMA-style port.
- Short coax routing within the dashboard or near the head unit, where 30cm is usually enough to reach.
- Hobbyist or “in-between” RF projects that require a clean Fakra-to-SMA jumper for 50 ohm coax work.
Potential limitations before you buy
- Connector mismatch risk: Fakra connectors come in different types, and “Fakra” alone is not enough to guarantee compatibility. Confirm you truly have Fakra Z (water blue) and that the other side is SMA female.
- Length is not adjustable: At 30cm, it is meant for tight routing. If you need more reach, you will want a longer adapter or different cable geometry.
How to choose the right adapter for your setup
To avoid wasted purchases, check these items first:
- Identify the Fakra end: look for the Fakra Z (water blue) standard on your existing vehicle antenna lead.
- Verify the receiving port: confirm your head unit or module has an SMA female connector (not SMA male, and not a different RF connector type).
- Match coax impedance: this cable is listed as 50 ohms. For most typical antenna coax work, this is the standard you want.
- Plan the routing distance: make sure 30cm is enough to comfortably connect without sharp strain on the cable.
Verdict
The Bingfu Fakra Z female to SMA female vehicle antenna adapter cable is a solid, budget-friendly choice if your goal is straightforward: bridge a Fakra Z (water blue) vehicle antenna lead to an SMA female input using a 30cm, 50 ohm coax jumper. It is not the right buy if you need a universal adapter, a different Fakra type, or more cable length, but for compatible installs and practical antenna projects, buyers generally describe it as working and easy to integrate.
FAQ
Is this cable compatible with any Fakra antenna connector?
No. It is specifically a Fakra Z (water blue) female to SMA female adapter cable. If your Fakra type or color variant is different, it may not fit.
What length is the adapter cable?
It measures 30cm (12 inches).
Is the coax impedance suitable for typical antenna RF use?
The cable is listed as 50 ohms, which aligns with common antenna coax impedance needs.
What vehicle systems is it intended for?
It is marketed for vehicle antenna compatibility involving car GPS navigation, FM/AM radios, Sirius XM satellite radio, DAB digital radio (where supported), and 4G LTE telematics modules.
Do buyers say it works reliably for antenna projects?
Available buyer-review snippets are consistent that the cable is functional for practical signal routing and antenna-related projects, but there is not enough detailed performance testing in the snippets to quantify RF performance metrics beyond “it works” for matching connectors.
Specifications
| Product Title | Bingfu Fakra Z Female to SMA Female Vehicle Antenna Adapter Cable 30cm 12 inch for Car Stereo Android Head Unit GPS Navigation FM AM Radio Sirius XM Satellite Radio 4G LTE Telematics Bluetooth Module |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Antennas |
| Brand | BINGFU |
| Manufacturer | Bingfu |
| Model Number | BFUSAC0076 |
| Color | Fakra Z Female to SMA Female 12inch |
| Item Weight | 9.07 g |
| Product Dimensions | 4.7"L x 6.7"W x 0.5"H |
| AntennaDescription | Antenna Accessory |
| UPC | 790404680112 |
| Number of Items | 1 |
| Mfr Part Number | BFN00219 |
| Warranty Description | Bingfu |
| Unit Count | 1 Count |
| Impedance | 50 Ohms |
| Item Dimensions L x W x H | 4.7"L x 6.7"W x 0.5"H |
| Antenna | Antenna Accessory |
| Number of Packs | 1 |
Available variants
Color
- Fakra Z Male to SMA Male 12inch
- Fakra Z Female to SMA Female 12inch
- Fakra Z Female to SMA Female 3.28ft
- Fakra Z Male to SMA Male 3.28ft
Recommended next
Anina Car Active GPS Antenna for Kenwood DDX/DNX/KNA/DDX Alpine JVC Navigation Radio Compatible with Toyota Honda Nissan
The Anina active magnetic GPS antenna is designed for select Kenwood, Alpine, JVC (and compatible Toyota, Honda, Nissan setups) aftermarket navigation/head units. It’s a plug-and-play style upgrade with an active LNA and a magnetic mount, but correct fit depends on matching the antenna connector and your unit’s GPS input.
Bingfu Car GPS Antenna SMA Male Waterproof Active GPS Navigation review
The Bingfu Car GPS Antenna is a low-profile, active GPS option built for head units, trackers, and vehicle electronics that need reliable satellite lock. With a 3 m cable, SMA male right-angle connector, and magnetic or adhesive mounting, it is a practical upgrade when a built-in or bundled antenna underperforms. The main thing to double-check is connector compatibility (SMA male) and the fit of your installation location.
RTK GNSS Active Antenna High Precision Helix Positioning GPS GLONASS Beidou BDS Galileo Four-Star Multi-Frequency Antenna, Slinkdsco
The Slinkdsco SK530 RTK GNSS active helix antenna is built for multi-constellation, multi-frequency GNSS work where a compact antenna and short cable setup matter. Buyers report quick satellite lock and solid RTK performance, with the main tradeoff being that the price can feel high if you need to buy many units.
Segway Navimow Antenna Extension Kit for Navimow H800N-VF, H1500N-VF, H3000N-VF, i105N, i110N
The Segway Navimow antenna extension kit helps you mount the GPS antenna higher and farther from the base, which can improve positioning reliability in tricky yards. It’s designed for specific Navimow models, but you may need to remap your lawn after relocating the antenna, and real-world build details may be hit-or-miss depending on how you mount it.