Battery Chager Ignition Switch Lock with 2 Keys for Motorcycle Electric Bike Scooter E-Bike Electric Lock Accessories
Quick take
This VOGOOPOI battery safety pack cover lock combines an ignition-switch style control with metal construction and two keys for motorcycle, e-bike, and scooter battery enclosures. Buyers commonly describe it as an effective replacement and a straightforward way to restore access control, but fitment can be tricky because “universal” depends on matching your cylinder diameter and hole spacing.
Pros and cons
Pros
- Metal construction (stated as stainless steel) with a compact 10mm cylinder.
- Includes 2 keys, and each key is part of the set for the lock core.
- Designed as an ignition switch style lock for battery pack safety covers.
- Multiple buyers reported it working as intended after installation and as a replacement part.
Cons
- Fitment is not truly one-size-fits-all, so hole layout and cylinder dimensions matter.
- Some installations may take time or effort, especially if your old hardware has to be removed.
- There is limited buyer evidence beyond short reports, so performance and durability patterns are harder to confirm.
What buyers think
Buyer-review evidence is limited, but the available comments share a consistent theme: this lock tends to work well as a replacement when the battery box layout matches. Several shoppers mention it restored functionality after losing keys or replacing a worn ignition component, and they describe installation as manageable once the correct fit is achieved. A small amount of feedback also points out that quality may be lower than higher-end parts at a low price point, while still getting the job done for the intended purpose.
What this lock is, and how it’s meant to be used
This is a battery safety pack cover lock with an ignition switch style action (ON-OFF). It’s intended for battery-enclosure access control on motorcycles and electric bikes or scooters, where you want a keyed lock to secure the pack cover and help prevent unauthorized operation or access. The product includes a plug-in connector and is designed as a surface-mount component that uses a hinge lever actuator and a single position.
Key specs that affect compatibility
If you are replacing an existing battery pack lock, the dimensions below are the details most likely to determine whether it installs cleanly.
- Cylinder diameter: 10mm
- Cylinder length: 16mm maximum, 7.5mm minimum
- Distance between hole centers: 15.5mm
- Mounting type: surface mount
- Operating voltage: 36V
- Current rating: 2 kiloamps
It’s also described as having normally open contact type and a two-way circuit. That means you should confirm your current lock wiring and connector type align with your battery system before ordering.
Pros and cons (expanded)
Pros
- Replacement-friendly form factor: Reviewers describe it as working well after swapping in a new lock, including cases where keys were lost or an ignition component needed replacement.
- Includes two keys: You get a matched pair in the same lock core system, helpful if multiple riders or backup storage matters.
- Built for battery security applications: The ignition switch lock design is tailored to battery pack cover locking rather than being a generic key switch.
Cons
- Fitment depends on your battery enclosure: Even though it’s marketed as universal, installation success depends on your existing hole spacing and cylinder dimensions.
- If you do not have access to the existing hardware, plan for extra time.
- Value is best for straightforward fixes: With limited detailed buyer feedback, it’s best viewed as a practical replacement at a budget-friendly tier, not as a premium security upgrade with proven long-term performance.
Who should buy it
- You need a keyed replacement for a motorcycle, e-bike, or scooter battery lock with an ignition-switch style action.
- Your battery box matches the mounting geometry (10mm cylinder diameter and 15.5mm hole centers) and you’re comfortable confirming compatibility.
- You want a budget repair path to restore access control when you lost keys or the original lock stopped working.
Who should avoid it
- You cannot verify hole spacing or cylinder fit. If the enclosure dimensions do not match, you may face rework or additional parts to make it work.
- Your system is not 36V compatible (based on the stated operating voltage). Confirm voltage and wiring compatibility before installing.
- You’re looking for a highly documented long-term security component. The buyer evidence available here is more focused on “replacement success” than long-term durability comparisons.
Alternatives to consider
If this lock’s dimensions or voltage do not match your battery enclosure, consider alternatives based on your priorities:
- Dimension-matched replacement locks: Search for locks that explicitly list your cylinder diameter and exact hole center spacing, then confirm connector and voltage compatibility.
- Different switch style options: If your battery system expects a specific switch type, look for ignition-switch keyed locks that match operation mode and wiring, rather than focusing only on the “universal” label.
- Budget vs. fit certainty: If you have a lot of uncertainty about measurements, paying a bit more for a part with clearer dimensional compatibility can save time during installation.
Price and availability
This lock is positioned as a low-cost replacement part, with in-stock availability shown for the listing. For the most current pricing and stock status, check the product page.
Verdict
The Battery Chager ignition switch lock is a solid, budget-friendly replacement option for riders who need a keyed battery pack cover lock for a motorcycle, e-bike, or scooter. The main caveat is compatibility: if your enclosure’s cylinder diameter and 15.5mm hole center spacing do not match, installation may be difficult. If you can confirm fit up front, buyer feedback suggests it can get the job done and restore access control.
FAQ
How do I check if this battery lock will fit my bike or scooter?
Compare your battery enclosure to the lock’s stated cylinder diameter (10mm), hole spacing (15.5mm between hole centers), and cylinder length range (16mm max, 7.5mm min). Also confirm your system’s connector and 36V operating voltage compatibility.
Does it come with two keys?
Yes. The package includes 2 keys for the lock.
Is it really “universal” for all e-bike and scooter battery packs?
It’s marketed as universal, but installation depends on physical and electrical compatibility. If your battery box hole layout and cylinder dimensions match, it’s more likely to install without major rework.
What voltage is this ignition switch lock for?
The stated operating voltage is 36V.
Is installation easy?
Some buyers describe installation as straightforward, but others note it can be challenging depending on access to the old lock and how closely your enclosure matches the lock’s mounting geometry. Plan for time if you need to remove existing hardware.
What are the most important specs to verify before buying?
Verify the cylinder diameter (10mm), hole center distance (15.5mm), mounting type (surface mount), connector type (plug-in), and operating voltage (36V). Those factors most directly affect fit and safe integration.
Specifications
| Product Title | Battery Chager Ignition Switch Lock with 2 Keys for Motorcycle Electric Bike Scooter E-Bike Electric Lock Accessories |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Alarms & Anti-Theft |
| Brand | VOGOOPOI |
| Manufacturer | VOGOOPOI TM |
| Material | Stainless Steel |
| Operation Mode | ON-OFF |
| Current Rating | 2 Kiloamps |
| Operating Voltage | 36 Volts |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Switch Type | Ignition Switch |
| Terminal | Key |
| Circuit Type | 2-way |
| Mounting Type | Surface Mount |
| Actuator Type | Hinge Lever |
| Number of Positions | 1 |
| Lower Temperature Rating | 200 Degrees Celsius |
| Upper Temperature Rating | 200 Degrees Celsius |
| Control Method | Touch |
| Connectivity Protocol | X-10 |
| Item Dimensions | 2.8 x 1.5 x 1.5 inches |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Material Type | Stainless Steel |
| Contact Material | Alloy Steel |
| Brand Name | VOGOOPOI |
| Part Number | E40E36 |
Recommended next
Urban UR59 High Security Motorcycle Disc Lock (ø14 mm, Double Locking Mini U)
The Urban UR59 mini U-style disc lock is a compact, key-operated hardened-steel option designed to help deter theft for motorcycles, scooters, and eBikes. It uses a double-locking design (fork locked at both tips) and a bright yellow reminder cable for better day-to-day usability, with a main tradeoff being that you will still need compatible mounting points for the disc or chain setup you prefer.
Motorcycle Helmet Lock-Master Lock #99KA - 2 Keyed Alike
The Master Lock #99KA is a straightforward cable helmet lock kit designed to deter casual theft and help keep your helmet from being knocked off your bike. Based on buyer feedback, it’s easy to attach, convenient for quick parking stops, and offers a practical way to secure helmets in everyday situations, with the main tradeoff being that it is not a “bolt-cutter proof” lock.
URBAN UR14S Approved Motorcycle Disc Lock with Smart Alarm
The URBAN UR14S is a stainless-steel motorcycle disc lock with a built-in 120dB alarm, LED, and an optional warning-only mode. It uses a 14mm double-locking design and is positioned for riders who want strong physical security plus an audible deterrent, with the main caveat being that some buyers find the alarm louder in theory than in practice.
Motorcycle Lock Combo - Helmet and Brake Anti-Theft Grip (SKYJDM, Red)
A compact key-lock combo designed to secure your front brake and clamp your helmet to the handlebar on motorcycles, bikes, ATVs, and scooters. It works best for riders whose handlebar diameter falls within 1.3–1.5 inches, and it can feel fiddly if your clearances or grip fit are slightly off.