4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver
Quick take
This 4-pack converts an SFP port to a gigabit RJ45 Ethernet connection for Cat5e/Cat6 cabling up to 100m. It’s a good fit for users who need quick “copper out” connectivity for switches, routers, NICs, or media-converter style setups that accept compatible 1000BASE-T SFP modules. The main caveat is compatibility, some branded Cisco/Meraki-style gear can be selective with third-party SFPs.
Pros and cons
Pros
- 1000BASE-T to RJ45 conversion for standard gigabit copper networking (10/100/1000M).
- Up to 100m reach over Cat5e/Cat6 cabling, useful for typical rack-to-rack runs.
- Designed for plug-and-play use with hot-plug support (including ESD protection claims).
- Comes as a 4PCS bundle, convenient when you need multiple ports.
Cons
- Compatibility with your exact switch or SFP implementation must be confirmed, since some devices may reject third-party modules.
- These are gigabit modules (not 10G), so they will not meet higher-speed SFP needs.
- Some users note the latch behavior may differ from “typical” SFP modules, depending on the switch.
What buyers think
Buyer-review evidence is generally positive but not deep enough to claim universal consistency across every switch brand and model. The recurring themes are straightforward: installation is often described as easy or plug-and-play, the modules are recognized by network gear in typical use, and they do what the name implies by enabling standard gigabit RJ45 connectivity from SFP ports. One limitation that comes up relates to compatibility, with buyers cautioning that some branded networking equipment can be picky about third-party SFP modules. A separate comment mentions the locking feel may not match expected SFP retention behavior, though performance in that setup was still reported as stable.
What this transceiver is for
The 4PCS 1000BASE-T SFP to RJ45 copper transceivers are meant for a specific job: turning an SFP interface on your network device into an RJ45 gigabit Ethernet port. If you have existing Cat5e or Cat6 cabling and your switch (or related gear) offers SFP slots, these modules can reduce the need for special media converters by letting you keep the rest of your infrastructure on copper.
Key specs that matter for buying
Speed and cable reach
- Data rate: 10/100/1000M (gigabit Ethernet).
- Reach: up to 100m over CAT5E (and the listing references CAT5E/CAT6 use).
Interface and power
- Connector: 1G SFP to RJ45 copper.
- Power: listed as 2.5W MAX, with a lower power dissipation claim (less than 1.05W) in the feature bullets.
- Hot-pluggable: designed to be plug-and-play with hot-plug support.
- DDM/DOM: listed as not supported (No).
Compatibility notes to take seriously
The modules are marketed for use with a wide set of network equipment that supports SFP-type copper gigabit transceivers (including Cisco/Meraki, Ubiquiti, TP-Link, Supermicro, Netgear, Broadcom, Linksys, Huawei, and Mikrotik mentions). Still, real-world compatibility varies by switch model, firmware, and whether the SFP cage expects a specific vendor, MSA behavior, or EEPROM format. If you rely on strict port authentication, you should confirm your exact device supports MSA-compliant 1000BASE-T SFP modules before ordering.
Pros and cons in real-world terms
Why it’s a solid option
- You have gigabit-only needs: For setups that require 1G over copper, this aligns directly with 1000BASE-T.
- You want standard RJ45 cabling: If your infrastructure uses Ethernet wall drops, patch panels, or existing Cat5e/Cat6, this avoids re-cabling to fiber.
- You need multiple ports: The 4PCS pack is convenient for expanding a rack, replacing several modules, or keeping spares on hand.
Where buyers may run into issues
- Selective SFP compatibility: Some branded switches can reject third-party SFPs, even if they are the “right type.”
- No diagnostics support: The listing indicates DDM/DOM is not included, so if your system relies on optical/electrical diagnostic reporting, you may not get it from these modules.
Who should buy
- Owners of switches, routers, NICs, or servers that provide 1G SFP slots and need to connect to RJ45 gigabit copper using Cat5e/Cat6.
- Network admins doing rack cleanups or upgrades who want an easy way to expand copper ports without buying one-off conversions.
- Buyers comfortable verifying SFP compatibility for their exact switch model.
Who should skip (or double-check hard)
- Anyone needing 10GbE (or faster) through SFP, since this is a 1000BASE-T module.
- Users whose switches require vendor-specific or strictly validated SFP optics/transceivers, if compatibility isn’t known for this specific model.
- Buyers who depend on DDM/DOM diagnostics for monitoring, since the listing indicates “No.”
Price and availability
The current price is available via the retailer link below. Because SFP-module compatibility can vary by model, consider checking that your device supports third-party 1000BASE-T copper SFP transceivers before making a multi-module purchase.
Verdict
If you need gigabit RJ45 connectivity from SFP ports and your network gear accepts compatible 1000BASE-T SFP copper modules, this 4-pack is an efficient way to get multiple ports working without changing your copper cabling. The biggest decision factor is compatibility with your specific switch, and you should also confirm that gigabit speed and (if needed) diagnostics requirements match your setup.
FAQ
Is this a true SFP to RJ45 copper conversion, or does it require special cabling?
It is designed to convert an SFP port into an RJ45 Ethernet connection for copper cabling. The intended cable type is Cat5e/Cat6, with a reach claim up to 100m for gigabit.
Will this work in Cisco, Meraki, Ubiquiti, or other branded switches?
It is marketed for use with multiple well-known networking brands, but third-party SFP compatibility can be selective by switch model and firmware. If your equipment is picky, verify support for MSA-compliant 1000BASE-T copper SFP modules for your exact device.
Does it support DDM/DOM diagnostics?
The listing indicates DDM/DOM is not supported (“No”). If your switch uses diagnostics for transceiver monitoring, plan for that limitation.
How far can I run Ethernet using these modules?
The reach is listed as up to 100m using Cat5e cabling, which is in line with typical gigabit Ethernet copper distance expectations.
Do these transceivers lock in like typical SFP modules?
Performance can still be stable, but if your switch requires a very specific retention feel, double-check fit expectations.
Are these modules gigabit only?
Yes. They are 1000BASE-T (10/100/1000M) modules, not 10GbE.
Specifications
| Product Title | 4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco,Meraki,Ubiquiti,D/TP Link,Supermicro,Netgear,Broadcom, 1.25G SFP-T CAT5E/CAT6 up to 100m Mikrotik S-RJ01 |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Network Transceivers |
| Manufacturer | GESD |
| Item Weight | 4.9 ounces |
| Package Dimensions | 7.6 x 3.35 x 1.42 inches |
| Item model number | SFP GE-T |
Available variants
Capacity
- 1.25G
- 10G (High-Speed)
Color
- 4PCS 1.25G SFP-RJ45
- 4PCS 10G SFP-RJ45
- 1PCS 1.25G SFP-RJ45
- 1PCS 10G SFP-RJ45
- 2PCS 1.25G SFP-RJ45
- 10PCS 1.25G SFP-RJ45
- 10PCS 10G SFP-RJ45
- 2PCS 10G SFP-RJ45
Recommended next
10Gtek 𝟭.𝟮𝟱/𝟮.𝟱/𝟱/𝟭𝟬𝗚-T SFP+ to RJ45 CAT.6a Copper Transceiver
The 10Gtek 10GBase-T SFP+ to RJ45 copper transceiver is built for switches or NICs that accept SFP+ modules and you want multi-rate Ethernet over CAT.6a/CAT7. It supports auto-negotiation across 1.25G, 2.5G, 5G, and 10G, with up to 30 meters over copper, and is aimed at compatibility with many common networking vendors. The main buying caveat is that not every brand’s switch or ecosystem supports every SFP+ copper option the same way, so double-check compatibility before buying.
ELECROW Meshtastic LoRa Transceiver with GPS and nRF52840 (ThinkNode M1)
The ELECROW ThinkNode M1 is a compact Meshtastic LoRa transceiver with a built-in GPS (GPS, GLONASS, BeiDou, QZSS) and a sun-readable 1.54-inch E-ink display. Buyers highlight easy Bluetooth setup, strong day visibility, and battery life around 48 hours, with a few caveats around firmware quirks and antenna connection when upgrading.
4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module
A 4-pack of OM3 850nm multimode SFP (1.25Gb/s) LC transceivers rated for up to 550 meters on 1000BASE-SX links, with DDM for monitoring and a hot-swappable design. Best for buyers replacing or stocking 1G SFP multimode optics for Cisco, Meraki, Ubiquiti UniFi, Mikrotik, and other SFP cage equipment that supports MSA-compliant optics, with the main caveat being strict compatibility with the switch and the multimode fiber distance budget.
1000BASE-T SFP Transceiver, SFP to RJ45, 1.25G Copper SFP to Ethernet Module
A gigabit copper SFP (1000BASE-T) that turns an SFP slot into an RJ45 Ethernet port. Best for buyers who need a cost-effective fiber-to-copper style uplink using Cat5e/Cat6 (up to 100m), but compatibility with your exact switch matters, and it is not meant for HP/HPE models.