4 Pcs Adhesive Piece Magnet Replacement for Garmin Low-Profile Magnetic
Quick take
This 4-piece replacement kit is made to restore the adhesive portion of the Garmin low-profile magnetic windshield mount for compatible dash cams. It is a good fit if you are moving the mount between vehicles or replacing an aging bond, and you want a strong windshield stick that holds across a wide temperature range. The main caveat is that the adhesive backing is not designed for reuse after removal, so plan to install it carefully the first time.
Pros and cons
Pros
- Made as a replacement for the adhesive components of Garmin low-profile magnetic mounts (4 pieces included).
- Designed for windshield mounting, with instructions to clean the glass and press into position.
- Strong hold is a core design goal, with operating temperature range from -20°C to 80°C.
- Compatibility covers multiple Garmin dash cam models and the Garmin Speak/Speak Plus line.
Cons
- Adhesive material is not removable for reuse, so repositioning requires reapplication.
- Best results depend on proper windshield cleaning and careful placement, since it is meant to bond securely.
What buyers think
Buyer-review evidence is limited, but the available verified feedback is consistently positive. Multiple remarks describe the replacements as working as expected, feeling similar to the original mount hardware, and having very strong magnets that stay in place. There are no clear recurring complaints about fit, mounting success, or compatibility in the review snippets provided.
Who this is for
This kit is for owners of compatible Garmin dash cams who need replacement adhesive pieces for the low-profile magnetic windshield mount. It is especially relevant if you frequently swap your dash cam between vehicles, or if you want a fresh adhesive bond rather than reusing an old one.
Compatibility and mounting basics
These adhesive magnetic replacement pieces are intended for Garmin low-profile magnetic mount setups used with dash cams and related models such as Garmin Dash Cam 45/46/47, 55/56/57, 65W/66W/67W, and Garmin Speak/Speak Plus (with Alexa). The kit is mounted on the windshield, so compatibility depends on whether your existing low-profile magnetic system uses the adhesive patch pieces it is designed to replace.
How to install it on your windshield
Because this is an adhesive replacement, placement and surface prep matter. The general approach is to clean the windshield (remove dirt and water stains), then press the adhesive portion into the ideal position before allowing it to bond.
Performance, hold strength, and temperature range
The design emphasizes strong adhesion for secure use on car windshields. It is intended to work normally in temperatures from -20°C to 80°C, which helps address concerns about heat soak in summer or cold conditions where some adhesives can underperform. Since the bonding material cannot be removed for reuse, installation quality is the main factor in getting the best long-term hold.
Pros and cons in plain language
When it makes sense
- You want a dedicated replacement set to keep your Garmin low-profile magnetic mount working properly.
- You are confident you can clean the glass thoroughly and place the patch in the correct spot the first time.
- You want four adhesive pieces, which can be useful when moving between vehicles or replacing worn adhesive.
When to think twice
- You need a pad you can remove and reapply multiple times. This one is not meant to be reused after removal.
- Your use case depends on frequent repositioning after installation. Adhesive bonding is typically a one-time placement job.
Price and availability
This product is offered as a small bundle (4 pieces) and is currently listed as in stock in the United States. For the most up-to-date cost and delivery options, check the listing here: Buy on Amazon.
Verdict
If you have a compatible Garmin low-profile magnetic windshield mount and you need replacement adhesive pieces, this 4-piece kit is a straightforward way to refresh the bond and keep the magnetic system secure. It is best for careful installers who can prep the glass and commit to a final placement, since the adhesive bonding is not designed to be reused.
FAQ
Is this a complete dash cam mount or just replacement adhesive pieces?
It is a replacement set for the adhesive components used with the Garmin low-profile magnetic windshield mount system. It is not positioned as a full mount kit for general third-party windshield mounting.
Will it work with my Garmin dash cam?
It is intended for Garmin dash cam models and related Speak/Speak Plus units that use the compatible low-profile magnetic mount system, including models listed such as Dash Cam 45/46/47, 55/56/57, 65W/66W/67W, and Speak/Speak Plus.
Can I remove the adhesive patch and reuse it later?
No. The bonding material is not designed to be removed for reuse, so you should aim to install it in the correct position before it bonds firmly.
What is the temperature range for the adhesive?
It is designed to work in temperatures ranging from -20°C to 80°C.
What is the best way to install it for a strong hold?
Clean the windshield thoroughly (remove dirt and water stains) and press the adhesive piece into the ideal position before bonding.
Specifications
| Product Title | 4 Pcs Adhesive Piece Magnet Replacement for Garmin Low-Profile Magnetic Mount,Only Windshield Sticky No Mount,for Garmin Dash Cam 67W(Low-Profile Magnetic car Frame Adhesive Sheets) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Brand | Fansoun |
| Manufacturer | Fansoun |
| Model Name | Fansoun |
| Model Number | 7d182507-5257-417b-bdb9-a6c6dc30f764 |
| Compatible Devices | Garmin Dash Cam, Speak |
| Compatible Phone Models | Garmin Dash Cam(TM) 45,55 and 65W. Garmin Speak(TM) Plus with (R) Alexa(R) and Garmin Speak(TM) with (R) Alexa(R) |
| Mounting Type | Windshield |
| Additional Features | Adjustable, Non-Slip |
| Compatible with Vehicle Type | Car |
| Unit Count | 4.0 Count |
| Enclosure Material | Metal |
| UPC | 788567255018 |
| Mfr Part Number | 7d182507-5257-417b-bdb9-a6c6dc30f764 |
| Warranty Description | 12months |
| Built-In Media | low-profile magnetic camera mount |
| Special Feature | Adjustable, Non-Slip |
Available variants
Style
- Low-profile magnetic car frame adhesive sheets
- low-profile magnetic camera mount
Recommended next
NUNET Type C Dash Cam Hardwire Kit, MicroUSB & Mini USB 15ft Power Cable with Low Voltage Protection (11.9V cut-off)
The NUNET hardwire kit is designed to power compatible dash cams through your vehicle’s fuse box, with built-in low-voltage cut-off (11.9V) to help prevent battery drain. It includes multiple fuse tap types, plus USB connector flexibility (Micro-USB, Mini-USB, and Type-C) for easier compatibility across many dash cam models, though parking-monitor performance depends on how your specific dash cam uses constant vs switched power.
Scosche TA2053B Double DIN Radio Install Dash Kit Compatible with Select 2005-2008 Toyota Tacoma
The Scosche TA2053B is a vehicle-specific double DIN dash kit for select 2005 to 2008 Toyota Tacoma models. Buyers typically like the tight, gap-free look, good color match, and the ability to reuse stock Tacoma mounting hardware for a secure, properly aligned install, with the main caveats being minor trim fitment variability and a couple of parts that may feel less sturdy.
1Zero CD Slot Mount for CarPlay Screen, 360° Rotation Tool-Free
The 1Zero CD slot mount is a tool-free way to position an in-dash CarPlay screen or GPS device using your car’s CD slot. It offers 360° rotation, a multi-angle tilt, and a four-hook cradle designed to reduce wobble when tightened properly. The main caveat is compatibility, since some dashboards and CD slot layouts can block screens or mounting stability.
NuIth Double DIN Radio Dash Kits for Nissan Altima 2007-2012
The NuIth Double DIN dash kit helps Nissan Altima owners (2007 to 2012, specific non-digital A/C setup) install an aftermarket double-DIN radio with a factory-style fit and a wiring harness adapter that connects to the vehicle’s existing plug. It’s a budget-friendly way to cover dash gaps, but the plastic trim can feel a bit flimsy, so careful handling and correct cable routing matter.