2PCS Eyepiece Eye Cup Soft Rubber Eyepiece Cover Binocular Eye Cups Replacement for 34-36 mm Stereo Microscope (Flat Angle), black
Quick take
This 2-pack of soft rubber, flat-angle eyepiece eye cups is made to replace compatible stereo microscope eye guards and make viewing more comfortable. They’re intended for stereo microscopes with an eyepiece size range around 34 to 36 mm (inner diameter is listed at about 36 mm). The biggest buying caveat is compatibility, these are covers only, not full eyepieces.
Pros and cons
Pros
- Soft rubber construction for comfortable contact and easy handling
- Flat-angle design intended to block stray light for steadier observation
- 2-pack format is convenient if one side is missing or you want a spare
- Fit range is clearly specified (about 34 to 36 mm stereo microscopes, ~36 mm inner diameter)
Cons
- Not water resistant, so avoid wet conditions
- Only the eye cups are included, you need your existing eyepieces and proper fit
- If your microscope eyepiece diameter is outside the range, it may not mount correctly
What buyers think
Buyer-review evidence for these eye cups is positive but limited in detail. Across snippets, people generally report that the replacement eye cups work as intended, make focusing easier, and fit properly when used on compatible binoculars or microscope setups.
What these eyepiece eye cups are for
These soft rubber eye cups act as a comfortable interface between your eyes and your stereo microscope eyepieces. By forming a consistent seal and adding cushioning, they can make repeated viewing sessions easier, especially when you are working at a fixed setup for an extended period.
Fit and compatibility you should verify first
These are sized for stereo microscopes in the 34 to 36 mm class. The inside diameter is listed at approximately 36 mm, and the product also describes suitability across a small span that includes 34 to 36 mm models. Before buying, measure your eyepiece outer or inner opening (depending on how the original eye cup attaches) and compare to the stated range so you do not end up with an eye cup that is too loose or too tight.
What’s included: 2 rubber eyepiece guards (not the eyepieces themselves).
Shape: flat angle.
Comfort and viewing experience
The rubber material is described as elastic and easy to use, which typically matters for two reasons: it should feel less harsh than hard plastic and it can help you position your eye comfortably while you work. Buyers also mention that the cups make focusing easier, which aligns with the idea that a stable eye-to-eyepiece distance can reduce fussing during observation.
Light control and setup
The flat-angle design is intended to reduce interference from external light sources during observation. In practice, the value of this depends on your workspace lighting, how you sit at the microscope, and whether your existing cups are missing, worn, or no longer fit well.
Pros and cons for real buying decisions
When they are a good match
- You need replacement eyepiece eye cups for a compatible stereo microscope eyepiece size (around 34 to 36 mm)
- You want a softer, more comfortable edge around the eyepieces
- You’d like a 2-pack so you can replace both sides or keep a spare
When you should skip them
- Your microscope eyepieces are outside the stated size range
- You are looking for a full eyepiece replacement (these are only covers)
- You expect the cups to perform in wet environments (they are not water resistant)
Price and availability
Pricing can change, so check the current listing for the latest total cost and delivery details. If you are already sure about the eyepiece diameter match, these replacement cups are a straightforward, low-cost way to refresh comfort and light control.
Alternatives to consider
If these do not match your eyepiece diameter, your best alternatives are based on fit and installation style:
- Different inner diameter eye cups: Look for replacement cups that explicitly state the same mounting and inner size as your microscope eyepiece housing.
- Different shape (angled vs flat): If your current cups use a specific geometry for light blocking and alignment, matching the angle can matter as much as the size.
- Different material: Soft rubber is common for comfort, but some setups may benefit from a firmer seal if your eyepiece cup tends to shift.
Verdict
The 2PCS soft rubber flat-angle eye cups are a practical replacement choice if your stereo microscope eyepiece opening is in the 34 to 36 mm class and you want a comfortable, light-buffering interface. Just do not buy until you confirm fit, since the cups are only covers and do not include eyepieces.
FAQ
Are these eyepiece eye cups compatible with my stereo microscope?
They are designed for stereo microscopes with an eyepiece size range around 34 to 36 mm, with an inner diameter listed at about 36 mm. Measure your eyepiece opening and compare to that range to confirm fit.
What exactly is included in the package?
You get 2 rubber eyepiece guard covers. Eyepieces are not included, only the eye cups.
Will these block external light during observation?
The flat-angle design is intended to reduce interference from external light sources. How well that works depends on your workspace lighting and how securely the cups mount to your eyepieces.
Do these work in wet or humid conditions?
No, they are not listed as water resistant. Keep them dry during use and storage.
How hard is installation?
Installation should be straightforward for compatible eyepiece sizes, but fit and mounting method can vary by microscope model. If your housing does not hold the cup securely, you may need to use an attachment approach that your setup supports.
How many eye cups are included?
The set includes 2 eyepiece eye cups, one for each side in most binocular-style configurations.
Specifications
| Product Title | 2PCS Eyepiece Eye Cup Soft Rubber Eyepiece Cover Binocular Eye Cups Replacement for 34-36 mm Stereo Microscope (Flat Angle), black |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Binocular Accessories |
| Brand | BOKWORE |
| Manufacturer | BOKWORE |
| Model Name | BOKWORE36MM |
| Model Number | BK-36MM-2 |
| Color | black |
| Item Weight | 0.02 Kilograms |
| Features | Lightweight |
| Objective Lens Diameter | 36 |
| Specific Uses | Laboratory/Scientific Use |
| Eye Relief | 36 Millimeters |
| Exit-Pupil Diameter | 36 Millimeters |
| Coating | UV-Protective |
| Water Resistance Level | Not Water Resistant |
| Focus Type | Fixed Focus |
| Diopter Adjustment Range | +-3 diopters |
| Compatible Devices | Stereo Microscopes (32-36 mm) |
| Focus Description | Fixed |
| Enclosure Material | Rubber |
| Size Map | Full Size |
| Age Range Description | Adult |
| UPC | 705735503894 |
| Manufacturer Part Number | BK-36MM-2 |
| Warranty Description | 3 Year Manufacturer |
| Built-In Media | NO |
| Unit Count | 2.0 Count |
Recommended next
Eberlestock Recon Modular Bino Pack
The Eberlestock Recon Modular Bino Pack is a modular chest-harness system for carrying binoculars and adding accessories via MOLLE. Buyers like the comfort and breathable mesh, the magnetic bino access, and the organized front storage. The main caveat is that fit and attachment feel can depend on your binocular size and how you set up the internal retention.
Eberlestock Recon Modular Bino Pack
The Eberlestock Recon Modular Bino Pack is a lightweight, breathable chest-harness system for carrying binoculars with quick magnetic access and Molle-compatible add-on storage. It’s a strong fit for hunters and hikers who want hands-free optics carry and modular organization, with the main caveat being that fit and retention details can matter depending on your binocular size and how you plan to move from spotting to shooting.
Vortex Optics Uni-Daptor Binocular Tripod Adapter
The Vortex Uni-Daptor is a quick-release binocular adapter designed for steady tripod viewing, with a convenient way to switch back to free-hand glassing without fully removing the adapter from your binoculars. It’s lightweight and built for frequent outdoor use, though it can be pricey for a small accessory and compatibility can depend on your existing mounting quick-detach setup.
Neoprene Neck Strap for Cameras and Binoculars - Anti-Slip Neck Strap
A comfortable, softly padded neoprene neck strap designed to spread weight and reduce neck fatigue for binoculars and camera gear. Based on buyer feedback, it is easy to attach and stays in place thanks to textured inner neoprene, but strap length can be tight for some builds.