29.4V Charger for Gotrax Hoverboard Compatible with Gotrax GKS Lumios/Plus/Pro/Edge/Nova/Glide 24V and 25.2V Batteries
Quick take
This 29.4V hoverboard charger is built for select Gotrax GKS Lumios, Plus, Pro, Edge, Nova, and Glide models that use 24V and 25.2V batteries. Buyers generally report it powers their hoverboards and helps bring stored units back to life, but the biggest risk is making sure your board uses the same DC connector style.
Pros and cons
Pros
- Designed around a 29.4V output for compatible 24V/25.2V Gotrax GKS battery packs.
- Includes multiple safety protections (voltage, current, temperature, and overload).
- Commonly reported to work reliably for charging a hoverboard that has been sitting idle.
- Accepts standard AC input (100–240V), useful for household outlets and travel within that range.
Cons
- Connector compatibility is not universal, and some hoverboards use specialized connector types.
- If your model requires a different DC plug, you may need to match the connector rather than relying on the included one.
What buyers think
Buyer-review evidence is limited, but the available comments share a consistent theme: the charger typically works as expected for powering and charging compatible Gotrax hoverboards. Several reports describe straightforward, functional charging performance (including boards that had been stored for a while). At the same time, review evidence also highlights a practical fit issue, some hoverboard models use a different connector setup, so checking the DC plug style matters as much as matching the voltage.
What this charger is, and who it’s for
This is a replacement AC adapter charger intended for certain Gotrax hoverboards in the GKS line, specifically models listed as compatible with the Lumios, Plus, Pro, Edge, Nova, and Glide using 24V and 25.2V battery packs. The charger is built to deliver an output voltage of 29.4V, which is the key electrical match you should prioritize when you’re searching for a replacement.
Key specs that affect compatibility
Output voltage and battery match
The charger’s output is 29.4V. Since this is the voltage you are selecting when you buy, it should align with the battery configuration of your hoverboard (the listing targets 24V and 25.2V packs). If your board uses a different battery voltage system, this charger may not be the right replacement.
Input voltage and charging location flexibility
The charger supports AC input voltage from 100–240V. That generally makes it easy to plug in with standard power in the US while also being more flexible than single-voltage adapters if you ever use it in other regions where that input range is supported.
Connector type matters
It uses a DC-style connector, and buyer feedback indicates not every hoverboard shares the same plug shape. Translation for shoppers: before you buy, verify your hoverboard’s DC connector size and style, not just the model name.
Safety and build, what’s worth noting
The charger is described as having an advanced IC chip and multiple protection features, including voltage protection, current protection, temperature protection, and overload protection. It also uses a fireproof PC shell design and includes a pure copper core (aimed at longer service life). For replacement chargers, these safety-oriented features are a practical quality signal, especially when you are using the unit regularly.
Pros and cons, in plain terms
When it’s a good fit
- You own a compatible Gotrax GKS Lumios, Plus, Pro, Edge, Nova, or Glide model that uses 24V or 25.2V batteries.
- You’re replacing a lost or worn charger and want a straightforward plug-in replacement with a 29.4V output.
- You care about safety protections like overload and temperature/current/voltage protection.
When you should look elsewhere
- Your hoverboard uses a different DC connector type than the one included with this adapter.
- You’re unsure about battery voltage, or your model is not clearly within the 24V/25.2V target range.
Is it worth it?
For the right hoverboard, this charger’s value comes down to two things: matching the 29.4V output to a 24V/25.2V GKS battery system, and having the correct DC connector fit. Where shoppers should be cautious is connector compatibility, since that can turn a “compatible” model on paper into a frustrating mismatch in practice.
Price and availability
The current price and availability vary over time. If you’re ready to buy, check the latest listing details and confirm the DC connector type against your hoverboard before ordering.
FAQ
What voltage is this charger?
This charger outputs 29.4V, and it is intended for Gotrax hoverboards that use 24V and 25.2V battery packs (for the compatible GKS models listed).
Will this work with every Gotrax hoverboard?
No. It is made for specific Gotrax GKS models and battery voltage types. Also, connector compatibility can vary by hoverboard model, so you should verify your hoverboard’s DC plug style.
Does it support different wall outlets?
Yes. The charger accepts AC input voltage from 100–240V.
What connector type does it use?
It uses a DC connector for the hoverboard charging port (not a universal standard across all hoverboards). If your board uses a specialized connector, you may need to match the connector style before the charger will fit.
Does it have safety protections?
It’s described as having voltage, current, temperature, and overload protection.
Specifications
| Product Title | 29.4V Charger for Gotrax Hoverboard Compatible with Gotrax GKS Lumios/Plus/Pro/Edge/Nova/Glide 24V and 25.2V Batteries Power Adapter Cord |
|---|---|
| Category | Electronics > Power Accessories > AC Adapters |
| Brand | ZJCRLH |
| Manufacturer | ZJCRLH |
| Connector Type | 2-Pin |
| Compatible Devices | for Gotrax Hoverboard Compatible with Gotrax GKS Lumios/Plus/Pro/Edge/Nova/Glide 24V and 25.2V Batteries |
| Compatible Phone Models | for Gotrax Hoverboard Compatible with Gotrax GKS Lumios/Plus/Pro/Edge/Nova/Glide 24V and 25.2V Batteries |
| Additional Features | charger |
| Input Voltage | 120 Volts |
| Output Current | 0.99 Amps |
| Output Voltage | 29.4 |
| Power Source | Corded Electric |
| Portable | No |
| Power Plug | Type A - 2 pin (North American) |
| Current | AC |
| Plug Type | Type A - US style |
| Connectivity Technology | Wired |
| Warranty Description | 1 |
| Number of Items | 1 |
| Unit Count | 1.0 Count |
| Form Factor | Rectangular, Flat |
| Special Feature | charger |
Recommended next
ZOVEEK AC/DC Adapter Original Charger for Segway Ninebot (42V 1.7A)
This 42V, 1.7A (up to 71W max) AC/DC adapter is made for specific Segway-Ninebot E, ES, F, and MAX models that use a 1-pin connector. It includes multiple safety protections and is designed to run warm during charging, but it will not fit every variant, and there are a few reports of zero charging on incompatible units.
24V 2A DC Power Supply Adapter 24W AC/DC Adapter 100-240V AC to DC 24Volt 2Amp1A Power Adapter converter Transformers with 5.5mm x 2.5mm US Plug
This MTYTOT 24V 2A AC-to-DC adapter is designed for projects and devices that need a steady 24V DC input, such as 24V LED strip lights, some CCTV accessories, routers, and 3D printer-related setups. The main buying caveat is matching your device’s required voltage, current draw (must be 2A or less), and the 5.5mm x 2.5mm barrel connector polarity (center positive).
for Samsung SoundBar Power Cord 24V 2.5A Power Supply for review
This 24V DC, 2.5A (60W max) power adapter is designed to replace power for a range of Samsung soundbars and related wireless audio models that use a compatible barrel plug. It can also be used for other 24V devices that draw up to 2.5A, but it will not work for soundbars that require different voltage or charging specs, and connector shape matters (straight vs 90-degree).
ALITOVE 5V 2A Power Adapter 10W AC Adapter 100-240V 50-60Hz review
The ALITOVE 5V 2A 10W AC adapter is a fixed-voltage power supply for 5V devices, with a long 6.2 ft cable and 14 interchangeable DC tips to match common barrel and USB-style connectors. It is a practical pick for powering LED strips, CCTV cameras, baby monitors, small routers, and other 5V electronics, with the main caveat being correct voltage and connector size.