22mm Watch Strap Loops for Garmin Fenix 7/6/5 Forerunner 965/955/945/935/745/265/255
Quick take
These 22mm silicone strap loops are made to replace Garmin-compatible connector holders that help keep your band secured. They’re best for Garmin owners using 22mm wide straps who want an affordable set (10 pieces) and a non-slip inner design. The main caveat is fit, specifically the 22mm measurement and that the loop’s inside bumps may not work with certain strap hole shapes.
Pros and cons
Pros
- Designed for Garmin models that use 22mm wide straps, with a compatibility list spanning Fenix, Forerunner, and more
- Soft, flexible silicone construction, with a non-slip bump design intended to reduce strap shifting
- 10-piece set for replacements and backups, not just a single loop
- Installation is reported as straightforward when swapping onto compatible straps
Cons
- The loops can be noticeably wider or bulkier than OEM versions, which some buyers may find less streamlined
- You must confirm strap-width measurement at the connection area, not just dial size or strap taper
- Inside rectangular bumps may not work with straps that have a small round hole in the center
What buyers think
Buyer-review evidence is fairly consistent on usability and fit. Reviews describe the loops as easy to replace and effective at holding the strap securely on compatible Garmin watches. Several buyers specifically mention that the extra “tab” or anti-move feature helps keep the strap from shifting. The most repeated theme is that these replacement loops appear wider and bulkier than the original Garmin loops, but still perform their job. Overall, review evidence supports the idea that the loops are a practical replacement and good value when you match the 22mm strap width and strap-hole style.
What these strap loops are for
These are replacement fastener rings, sometimes referred to as connector holders, that help secure a Garmin watch strap’s connection. If your current loops are worn, missing, or you simply want spares, a multi-pack like this can make it easier to keep your straps functioning reliably.
Compatibility and fit: the biggest thing to get right
The loops are built for 22mm wide straps. That means you should measure the strap connection area (the part near the buckle/end where the loop attaches), not the narrower middle of a tapered strap.
They’re marketed as compatible with a broad range of Garmin models that use 22mm straps, including:
- Fenix 7/7 Pro/6/6 Pro/5/5 Plus
- Forerunner 965/955/945/935/745
- Forerunner 265/255
- instinct/instinct 2/instinct Crossover
- Approach S62/S70 (47mm), Epix Gen 2, Descent G1, Quatix 5
- MARQ series (all series)
Important fit note: The non-slip inner design includes rectangular bumps. If your strap uses a small round hole in the center, these bumps may not be compatible.
Design and comfort
These loops use soft silicone, aimed at being flexible and skin-friendly for everyday wear. The non-slip bump design is intended to keep the strap from creeping or shifting once installed. That same “grip” feature is also part of why strap-hole geometry matters, so taking a quick look at your existing strap’s connection shape can save time.
Installation experience
From buyer feedback, the swap process is generally described as simple for compatible Garmin setups. If you’ve replaced similar strap hardware before, you’ll likely find these are a straightforward drop-in replacement for the connector holder function.
Pros and cons for different buyers
Best for
- Garmin owners who want backup loops and an economical multi-pack
- People replacing worn connector holders who want a soft silicone, non-slip style
- Buyers who confirm their strap connection is truly 22mm wide and match the strap hole style
Consider before buying
- Anyone who is very sensitive to the look or thickness of watch hardware, since buyers note a wider or bulkier profile than OEM
- Users with straps that have a small round center hole, since the inside bump design may not apply
Value: is it worth it?
This is positioned as a budget-friendly replacement set, and buyer feedback aligns with that view, especially because it comes as a 10-piece pack. The tradeoff for the value is mainly aesthetic and profile-related, since several buyers report the loops are wider or bulkier than the original Garmin hardware. If you’re prioritizing secure strap retention and having spares, this set is an easy fit. If you want a dead-on OEM look and ultra-low profile, you may prefer to match the exact original loop style more closely.
Price and availability
Pricing can change, but this accessory is typically offered as an affordable replacement option versus buying single units. Check the current listing for the latest price and whether the 10-piece black set is available where you shop.
FAQ
Are these strap loops only for Garmin watches?
They’re made for Garmin models that use 22mm wide straps, but they may also work with other 22mm wide straps that match the loop connection style (including the inside bump compatibility note).
How do I know if my strap is 22mm?
Measure the strap width at the connection area where the loop attaches. If your strap tapers, the middle may measure differently than the connection end, so measure near the end with the buckle/fastener area.
Will these work with straps that have a round hole in the middle?
The inside has rectangular bumps. If your strap uses a small round hole centered in that area, the bumps may not apply, so it may not fit correctly.
Do they feel secure once installed?
Buyers commonly describe the loops as holding the strap securely, helped by the non-slip inner design intended to reduce movement.
Are these thicker than OEM loops?
Some buyers report they are noticeably wider or bulkier than the OEM Garmin loops. If you prefer a slimmer, original look, this is worth considering before purchasing.
What’s included in the package?
The package includes 10 black silicone strap loops (connector holders) intended as replacements and spares.
Specifications
| Product Title | 22mm Watch Strap Loops for Garmin Fenix 7/6/5 Forerunner 965/955/945/935/745/265/255 Smartwatch Fastener Rings [10 Pcs], Soft Silicone Replacement Secure Rings Connector Holders Loop |
|---|---|
| Category | Electronics > Wearable Technology > Wristbands |
| Manufacturer | shixing |
| Color | 22mm-Black,10Pcs |
| Item Weight | 0.352 ounces |
| Package Dimensions | 3.74 x 2.09 x 0.35 inches |
| Item model number | bh22-10pcs |
| Special features | Durable |
| Other display features | Jewelry |
| Whats in the box | smartwatch accessories |
Available variants
Color
- Unisex-Black,10P
- 22mm-Black,5+5Pcs
- 20mm-Black,5+5Pcs
- 26mm-Black,10Pcs
- 26mm-Black,5+5Pcs
- 20mm-Black,10Pcs
- 22mm-Black,10Pcs
Recommended next
EMF Harmony Smartwatch Chip – Discreet Stainless Steel Bioresonance Rivet accessory
The EMF Harmony Smartwatch Chip is a discreet stainless-steel bioresonance rivet meant to add to compatible smartwatches and fitness bands, including Apple Watch, Garmin, Fitbit, and other wrist wear. Buyers mostly highlight the polished, “looks built-in” style and easy installation, but results are subjective and fit can vary by band model, especially on certain Apple Watch Ultra bands.
Band Compatible with Fenix 8 51mm/ Fenix 7X/ Fenix 6X Band (26mm Carbon Fiber Titanium Metal)
This 26mm quick-fit metal bracelet is designed for Garmin Fenix 8 51mm, Fenix 7X, and Fenix 6X models, delivering a carbon-fiber-style look with adjustable sizing and quick-release installation. The main tradeoff to consider is hardware security, since a small number of buyers report loosened/removed screws that caused disconnection.
Moko 2-Pack Sweatproof Ankle Strap Fit Fitbit Luxe/Inspire 2/HR/Inspire/Charge 5/4/3/2/Alta/Alta HR/Flex 1/2/Garmin, Adjustable Fitness Tracker Ankle Band with Mesh Pouch - Black
The MoKo 2-pack ankle strap turns compatible fitness trackers into a more accurate step-counter setup for activities where your wrists stay relatively still, like shopping carts or mowing. It uses a neoprene build with an internal microfiber surface, adjustable concealed snaps, and a mesh pouch meant to hold your device securely, though the mesh portion is not fully waterproof.
Polar Loop – Smart Screen-Free Wearable Health & Fitness Band with 24/7 Heart Rate, Sleep & Activity Tracking, Automatic Training Detection, No Subscription, 8-Day Battery
Polar Loop is a lightweight, screen-free health and fitness band that focuses on continuous heart rate, sleep tracking, and daily activity, with automatic training detection. It’s a strong fit for people who want 24/7 wearability and no subscription costs, but you should expect less precision for step and calorie-style activity goals compared with dedicated sports wear, and battery life may be shorter than the headline depending on use.