120 & 220 60mm Photo Scanning Holder (Brownie Asp Film Holder) for Epson V500 V550 V600
Quick take
This 120/220/620 60mm film holder is designed for Epson Perfection V500, V550, and V600 scanners, helping you position negatives consistently for scanning. It supports multiple common 60mm formats (including panoramic 6x17) and is typically purchased as a replacement or upgrade to an existing holder. The main thing to double-check is that your film size and scanner model match, since this holder is format-specific.
Pros and cons
Pros
- Compatible with Epson Perfection V500, V550, and V600 scanners.
- Supports 120/220/620 film widths in the 60mm class, with multiple 6x-series formats.
- Buyers report it fits into the Epson scanner well and works as a replacement.
- Designed to promote flat, aligned scanning of negatives (useful for reducing cropping and re-scans).
Cons
- It is a single-holder accessory, so you may need additional holders for other film sizes.
- Scans depend on correct negative orientation and flattening, so curled film may require careful handling.
- Review evidence is limited in volume, so long-term durability patterns are hard to confirm.
What buyers think
Buyer-review evidence is limited but consistent in one key area: fit and day-to-day usability with Epson V500/V550/V600 workflows. Several shoppers describe the holder as working correctly in their Epson scanner and as a practical replacement for what came with the unit. Overall, the feedback centers on compatibility and practicality rather than deep performance comparisons.
What this holder is for
This accessory is a film holder for scanning negatives, built for Epson’s V500/V550/V600 family. If you shoot medium format 120/220/620 (60mm width class) and want a dedicated way to position your negatives, this holder is meant to streamline scanning so your images land in the expected frame and orientation.
Film formats and sizing support
The holder is specified for film sizes in the 120/220/620 range with a 60mm width. It supports multiple common 6x-series formats, including:
- 6x4.5cm, 6x6cm, 6x7cm, 6x8cm, 6x9cm
- 6x12cm, 6x17cm
- 6x20cm
If your negative dimensions fall within the supported 60mm formats, this is the category fit you’re looking for. If you shoot different widths (or need a different adapter style), you’ll want to compare by film size first, not by scanner model alone.
Compatibility: epson V500, V550, and V600
This holder is listed for Epson Perfection V500, V550, and V600 scanners. Multiple buyers specifically mention it fitting properly in their Epson scanner and working for 120 film scanning. If you own one of those models, the compatibility is the product’s core strength.
Design focus: alignment and flatness
The manufacturer’s positioning emphasizes precise sizing, flatness, and sturdy construction, all of which matter for film scanning because negatives that sit unevenly can lead to uneven focus across the frame and more cropping or re-scans. While buyers don’t provide broad comparative testing, the overall feedback supports that the holder is usable in real scanning sessions, including when aligning wider/panoramic frames.
Pros and cons in real shopping terms
It’s a good match if you want a reliable Epson-compatible film holder
- You need a 120/220/620 60mm holder for Epson V500/V550/V600.
- You want consistent positioning for common 6x formats, including panoramic 6x17.
- You’re replacing a worn or missing holder, or you want an additional one for faster swapping.
Consider other options if you’re unsure about film size
- Your negatives are outside the 60mm/120-220-620 format range.
- You need multiple holders for different film sizes and are trying to solve everything with a single purchase.
- You’re expecting plug-and-play perfection even with badly curled negatives. Proper orientation and flattening still matter.
Price and availability
This accessory is an inexpensive, single-piece film holder in the scanner accessories category. To confirm today’s cost and shipping to your area, use the button below.
FAQ
Is this film holder compatible with the Epson V500, V550, and V600?
Yes. It is designed to work with Epson Perfection V500, V550, and V600 scanners.
What film formats does it support?
It supports 120/220/620 film in a 60mm width class, including 6x4.5cm, 6x6cm, 6x7cm, 6x8cm, 6x9cm, 6x12cm, 6x17cm, and 6x20cm formats.
Will it work for panoramic 6x17 negatives?
Yes, 6x17cm is among the supported 6x formats. Shoppers also specifically mention using it for panoramic 6x17 alignment in an Epson workflow.
Does this replace the original Epson holder?
It’s commonly purchased as a replacement or additional holder for Epson scanning sessions. Buyers report it fits properly in their Epson V500 setups.
Is it a set or one individual holder?
It’s listed as quantity 1, meaning it’s a single film holder accessory.
What should I do if my film is curled?
Curling can make it harder to keep a negative flat for consistent scanning. The workflow expectation is to orient and handle the film carefully so it sits properly in the holder.
Specifications
| Product Title | 120 & 220 60mm Photo Scanning Holder Brownie Asp Film Holder Slide Negative Holder Compatible with Epson Perfection V500 V550 V600 |
|---|---|
| Category | Office Products > Office Electronics > Scanners & Accessories > Scanners > Slide & Negative Scanners |
| Brand | OKLILI |
| Manufacturer | OKLILI |
| Model Name | Scanning Holder/Film Holder/Negative holder |
| Item Weight | 80 Grams |
| Scanner Type | Film |
| Connection Type | USB |
| Resolution | 6400 dpi |
| Color Depth | 24 bits |
| Media Type | USB |
| Minimum System Requirements | USB port compatible computer (e.g., Windows, macOS, Linux) |
| Warranty Description | 3 months manufacturer |
| Connectivity Technology | USB |
| Maximum Media Size | 7.87 x 7.87 inches |
| Number of Items | 1 |
Recommended next
BEONEGLOBAL ClearScan P5 Film Scanner with SD Card, Upgraded Version, 24MP High-Resolution 35mm/135/126/110/Super 8 Film & Slide Converter with 5” LCD
The BEONEGLOBAL ClearScan P5 is a USB film and slide digitizer built for quick JPEG conversions, a 5-inch preview LCD, and SD card saving. It supports 35mm/135 plus 126/110/Super 8 formats, and includes an SD card to start scanning immediately. The main caveat is that some buyers feel the adjustment and zoom range may not capture the full frame consistently for certain 35mm setups, and scanning can be time-consuming for large lots.
Plustek 2 x 35 mm Negative Holders (Negative Film), for OpticFilm 72~83 Series use only (8100 & 8200i & 8300i)
Plustek 2 x 35 mm negative holders are made for specific Plustek OpticFilm 72 to 83 series slide and negative scanners, helping you keep multiple 35mm negative strips organized for scanning. The main caveat is compatibility: these holders are not for the OpticFilm 135 and 135i series, so double-check your scanner model before buying.
Mchoi Hard Case for Kodak Slide N SCAN Digital Film Scanner 7" Max RODFS70
The Mchoi hard case is a purpose-fit, EVA shell storage solution for the Kodak Slide N SCAN 7" Max (RODFS70) so you can protect the scanner and keep accessories together. Buyers praise the snug fit and sturdy construction, with the main caveat being that this is an empty case only.
JJC Negative Slide Film Cutter for 35mm 120 Format Strip, 35mm Film Trimmer with 11-Level Brightness Adjustable LED Backlight Panel Support USB-C Charging and Graduated Mark for Clean Cutting
The JJC Negative Slide Film Cutter is a rail-based film trimmer built for straight, consistent cuts before scanning or storing negatives. Its adjustable LED backlight (11 levels) and engraved/graded placement marks make alignment easier, and the aluminum rail plus anti-slip silicone pads help keep film steady during cutting.